* Introduce "calico" as a `networking` option on Azure and DigitalOcean
using Calico's new VXLAN support (similar to flannel). Flannel remains
the default on these platforms for now.
* Historically, DigitalOcean and Azure only allowed Flannel as the
CNI provider, since those platforms don't support IPIP traffic that
was previously required for Calico.
* Looking forward, its desireable for Calico to become the default
across Typhoon clusters, since it provides NetworkPolicy and a
consistent experience
* No changes to AWS, GCP, or bare-metal where Calico remains the
default CNI provider. On these platforms, IPIP mode will always
be used, since its available and more performant than vxlan
* Add ability to load balance TCP applications (e.g. NodePort)
* Output the network load balancer ARN as `nlb_id`
* Accept a `worker_target_groups` (ARN) list to which worker
instances should be added
* AWS NLBs and target groups don't support UDP
* Heapster addon powers `kubectl top`
* In early Kubernetes, people legitimately used and expected
`kubectl top` to work, so the optional addon was provided
* Today the standards are different. Many better monitoring
tools exist, that are also less coupled to Kubernetes "kubectl
top" reliance on a non-core extensions means its not in-scope
for minimal Kubernetes clusters. No more exceptionalism
* Finally, Heapster isn't that useful anymore. Its manifests
have no need for Typhoon-specific modification
* Look to prior releases if you still wish to apply heapster
* Restore the original special-casing of DigitalOcean Kubelets
* Fix node metadata InternalIP being set to the IP of the default
gateway on DigitalOcean nodes (regressed in v1.12.3)
* Reverts the "pretty" node names on DigitalOcean (worker-2 vs IP)
* Closes#424 (full details)
* Require an iPXE-enabled network boot environment with support for
TLS downloads. PXE clients must chainload to iPXE firmware compiled
with `DOWNLOAD_PROTO_HTTPS` enabled ([crypto](https://ipxe.org/crypto))
* iPXE's pre-compiled firmware binaries do _not_ enable HTTPS. Admins
should build iPXE from source with support enabled
* Affects the Container Linux and Flatcar Linux install profiles that
pull from public downloads. No effect when cached_install=true
or using Fedora Atomic, as those download from Matchbox
* Add `download_protocol` variable. Recognizing boot firmware TLS
support is difficult in some environments, set the protocol to "http"
for the old behavior (discouraged)
* Allow terraform-provider-aws >= v1.13, but < 3.0. No change
to the minimum version, but allow using v2.x.y releases
* Verify compatability with terraform-provider-aws v2.1.0
* Minimum versions of Terraform provider plugins are enforced in
each module already. Its better to provide examples with newer
versions. Some folks don't update them
* Previously, tutorials showed the minimum viable version of each
terraform provider that might be used
* Show creation of a PXE-enabled network boot environment when
using dnsmasq as the DHCP server
* Recommend TFTP be served from /config/tftpboot since /config
is preserved between firmware upgrades
* Recommend compiling undionly.kpxe from source to enable
TLS features
* Add a note that equal-cost multi-path service IP routing
(e.g. for ingress) requires EdgeOS v2.0. Previously, it was known
that TLS handshakes couldn't be completed with packet balacing.
I've verified this is no longer the case when using the v2.0
EdgeOS firmware, ECMP works as expected.
* Support terraform-provider-google v1.19.0, v1.19.1, v1.20.0
and v2.0+ (and allow for future 2.x.y releases)
* Require terraform-provider-google v1.19.0 or newer. v1.19.0
introduced `network_interface` fields `network_ip` and `nat_ip`
to deprecate `address` and `assigned_nat_ip`. Those deprecated
fields are removed in terraform-provider-google v2.0
* https://github.com/terraform-providers/terraform-provider-google/releases/tag/v2.0.0
* Collate upstream rules, alerts, and dashboards and tune for use
in Typhoon
* Previously, a well-chosen (but older) set of rules, alerts, and
dashboards were maintained to reflect metric name changes
* Fix minor docs typos and errors
* Allow a transient verison of the six PyPi package, the
docs build system can use the 0.12.0 (0.11.0 broke sync
tools so pinning to 0.10.0 was previously needed)
* Considering the reader of each, the Github README module links
can go to module source code and docs module links can go to the
associated tutorial docs for the platform/OS
* T3 is the next generation general purpose burstable
instance type. Compared with t2.small, the t3.small is
cheaper, has 2 vCPU (instead of 1) and provides 5 Gbps
of pod-to-pod bandwidth (instead of 1 Gbps)
* Provide migration instructions for upgrading terraform-provider-ct
in-place for v1.12.2+ clusters
* Require switching from ~/.terraformrc to the Terraform third-party
plugins directory ~/.terraform.d/plugins/
* Require Container Linux 1688.5.3 or newer
* Switch tutorials from using ~/.terraformrc to using the 3rd-party
plugin directory so 3rd-party plugins can be pinned
* Continue to show using terraform-provider-ct v0.2.2. Updating to
a newer version is only safe once all managed clusters are v1.12.2
or higher
* Remove bullet about isolating workloads on workers, its
now common practice and new users will assume it
* List advanced features available in each module
* Fix erroneous Kubernetes version listing for Google Cloud
Fedora Atomic
* Prefer InternalIP and ExternalIP over the node's hostname,
to match upstream behavior and kubeadm
* Previously, hostname-override was used to set node names
to internal IP's to work around some cloud providers not
resolving hostnames for instances (e.g. DO droplets)
* Allowing serving IPv6 applications via Kubernetes Ingress
on Typhoon Google Cloud clusters
* Add `ingress_static_ipv6` output variable for use in AAAA
DNS records
* Improve the workers "round-robin" DNS FQDN that is created
with each cluster by adding AAAA records
* CNAME's resolving to the DigitalOcean `workers_dns` output
can be followed to find a droplet's IPv4 or IPv6 address
* The CNI portmap plugin doesn't support IPv6. Hosting IPv6
apps is possible, but requires editing the nginx-ingress
addon with `hostNetwork: true`
* Support bare-metal cached_install=true mode with Flatcar Linux
where assets are fetched from the Matchbox assets cache instead
of from the upstream Flatcar download server
* Skipped in original Flatcar support to keep it simple
https://github.com/poseidon/typhoon/pull/209
* Require a terraform-provider-digitalocean plugin version of
1.0 or higher within the same major version (e.g. allow 1.1 but
not 2.0)
* Change requirement from ~> 0.1.2 (which allowed up to but not
including 1.0 release)
* Broaden internal-etcd firewall rule to allow etcd client
traffic (2379) from other controller nodes
* Previously, kube-apiservers were only able to connect to their
node's local etcd peer. While master node outages were tolerated,
reaching a healthy peer took longer than neccessary in some cases
* Reduce time needed to bootstrap a cluster
* Typhoon for Fedora Atomic uses system containers, container
images containing metadata, but built directly from upstream
and published and serve through Quay.io
* https://github.com/poseidon/system-containers
* Adjust firewall rules, security groups, cloud load balancers,
and generated kubeconfig's
* Facilitates some future simplifications and cost reductions
* Bare-Metal users who exposed kube-apiserver on a WAN via their
router or load balancer will need to adjust its configuration.
This is uncommon, most apiserver are on LAN and/or behind VPN
so no routing infrastructure is configured with the port number
* Choose the Container Linux derivative Flatcar Linux on
bare-metal by setting os_channel to flatcar-stable, flatcar-beta
or flatcar-alpha
* As with Container Linux from Red Hat, the version (os_version)
must correspond to the channel being used
* Thank you to @dongsupark from Kinvolk
* Replace os_channel variable with os_image to align naming
across clouds. Users who set this option to stable, beta, or
alpha should now set os_image to coreos-stable, coreos-beta,
or coreos-alpha.
* Default os_image to coreos-stable. This continues to use
the most recent image from the stable channel as always.
* Allow Container Linux derivative Flatcar Linux by setting
os_image to `flatcar-stable`, `flatcar-beta`, `flatcar-alpha`
* Add `worker_price` to allow worker spot instances. Defaults
to empty string for the worker autoscaling group to use regular
on-demand instances.
* Add `spot_price` to internal `workers` module for spot worker
pools
* Note: Unlike GCP `preemptible` workers, spot instances require
you to pick a bid price.
* Allow multi-controller clusters on Google Cloud
* GCP regional network load balancers have a long open
bug in which requests originating from a backend instance
are routed to the instance itself, regardless of whether
the health check passes or not. As a result, only the 0th
controller node registers. We've recommended just using
single master GCP clusters for a while
* https://issuetracker.google.com/issues/67366622
* Workaround issue by switching to a GCP TCP Proxy load
balancer. TCP proxy lb routes traffic to a backend service
(global) of instance group backends. In our case, spread
controllers across 3 zones (all regions have 3+ zones) and
organize them in 3 zonal unmanaged instance groups that
serve as backends. Allows multi-controller cluster creation
* GCP network load balancers only allowed legacy HTTP health
checks so kubelet 10255 was checked as an approximation of
controller health. Replace with TCP apiserver health checks
to detect unhealth or unresponsive apiservers.
* Drawbacks: GCP provision time increases, tailed logs now
timeout (similar tradeoff in AWS), controllers only span 3
zones instead of the exact number in the region
* Workaround in Typhoon has been known and posted for 5 months,
but there still appears to be no better alternative. Its
probably time to support multi-master and accept the downsides
* Change EBS volume type from `standard` ("prior generation)
to `gp2`. Prometheus alerts are tuned for SSDs
* Other platforms have fast enough disks by default
* Calico isn't viable on Digital Ocean because their firewalls
do not support IP-IP protocol. Its not viable to run a cluster
without firewalls just to use Calico.
* Remove the caveat note. Don't allow users to shoot themselves
in the foot
* Fix issue where worker firewall rules didn't apply to
additional workers attached to a GCP cluster using the new
"worker pools" feature (unreleased, #148). Solves host
connection timeouts and pods not being scheduled to attached
worker pools.
* Add `name` field to GCP internal worker module to represent
the unique name of of the worker pool
* Use `cluster_name` field of GCP internal worker module for
passing the name of the cluster to which workers should be
attached
* This reverts commit cce4537487.
* Provider passing to child modules is complex and the behavior
changed between Terraform v0.10 and v0.11. We're continuing to
allow both versions so this change should be reverted. For the
time being, those using our internal Terraform modules will have
to be aware of the minimum version for AWS and GCP providers,
there is no good way to do enforcement.
* Allow groups of workers to be defined and joined to
a cluster (i.e. worker pools)
* Move worker resources into a Terraform submodule
* Output variables needed for passing to worker pools
* Add usage docs for AWS worker pools (advanced)
* Set defaults for internal worker module's count,
machine_type, and os_image
* Allow "pools" of homogeneous workers to be created
using the google-cloud/kubernetes/workers module
* Upcoming releases may begin to use features that require
the `terraform-provider-ct` plugin v0.2.1
* New users should use `terraform-provider-ct` v0.2.1. Existing
users can safely drop-in replace their v0.2.0 plugin with v0.2.1
as well (location referenced in ~/.terraformrc).
* See https://github.com/poseidon/typhoon/pull/145
* Stop maintaining Kubernetes Dashboard manifests. Dashboard takes
an unusual approch to security and is often a security weak point.
* Recommendation: Use `kubectl` and avoid using the dashboard. If
you must use the dashboard, explore hardening and consider using an
authenticating proxy rather than the dashboard's auth features
* Add flannel service account and limited RBAC cluster role
* Change DaemonSets to tolerate NoSchedule and NoExecute taints
* Remove deprecated apiserver --etcd-quorum-read flag
* Update Calico from v3.0.1 to v3.0.2
* Add Calico GlobalNetworkSet CRD
* https://github.com/poseidon/terraform-render-bootkube/pull/44
* Add explicit "providers" section to modules for Terraform v0.11.x
* Retain support for Terraform v0.10.4+
* Add migration guide from Terraform v0.10.x to v0.11.x for those managing
existing clusters (action required!)
* Be sure docs and examples list Container Linux versions that
have been patched for Meltdown just in case someone copy-pastes
or sees them as recent versions
Dalton Hubble
JordanP
Carlos Cobo
Robert Fairburn
Michael Schubert
Stephen Cuppett
Dennis Schridde
Sendhil Panchadsaram
Michael Holt
@luke
Matt Dorn
Barak Michener
irontoby