Makefile

@@ -5,7 +5,7 @@ GIT_VERSION := $(shell git describe --always)
 DATE_VERSION := $(shell date +%Y.%m.%d)
 FULL_VERSION := v$(DATE_VERSION)-$(GIT_VERSION)
 
-OPENWRT_VERSION ?= 23.05.2
+OPENWRT_VERSION ?= 22.03.2
 OPENWRT_TARGET ?= mvebu/cortexa9
 OPENWRT_TARGET_DASHED ?= $(shell echo $(OPENWRT_TARGET) | sed 's|/|-|')
 OPENWRT_PROFILE ?= linksys_wrt1200ac
@@ -46,7 +46,7 @@ build: $(IMAGEBUILDER_DIR_PATH) $(IMAGEBUILDER_CUSTOM_PACKAGES_DIR_PATH) $(IMAGE
 
 	# Cleanup old packages signature
 	rm -f $(IMAGEBUILDER_DIR_PATH)/Packages $(IMAGEBUILDER_DIR_PATH)/Packages.gz $(IMAGEBUILDER_DIR_PATH)/Packages.sig
-
+	
 	# Build firmware
 	$(MAKE) \
 		-C "$(IMAGEBUILDER_DIR_PATH)" \
@@ -56,7 +56,6 @@ build: $(IMAGEBUILDER_DIR_PATH) $(IMAGEBUILDER_CUSTOM_PACKAGES_DIR_PATH) $(IMAGE
 		CONFIG_IPV6=n \
 		FILES="$(IMAGEBUILDER_CUSTOM_FILES_DIR_PATH)" \
 		BIN_DIR="$(BIN_DIR)" \
-		ROOTFS_PARTSIZE="$(ROOTFS_PARTSIZE)" \
 		clean image
 
 $(IMAGEBUILDER_DIR_PATH): $(IMAGEBUILDER_ARCHIVE_PATH)
@@ -111,7 +110,7 @@ gitea-release: tools/gitea-release/bin/gitea-release.sh
 		GITEA_RELEASE_NAME="$(FULL_VERSION)" \
 		GITEA_RELEASE_COMMITISH_TARGET="$(GIT_VERSION)" \
 		GITEA_RELEASE_IS_DRAFT="false" \
-		GITEA_RELEASE_BODY='Based on OpenWRT [`$(OPENWRT_VERSION)`](https://downloads.openwrt.org/releases/$(OPENWRT_VERSION)/targets/) and with Emissary [`$(EMISSARY_RELEASE)`](https://forge.cadoles.com/arcad/emissary/releases/tag/$(EMISSARY_RELEASE))' \
+		GITEA_RELEASE_BODY="With Emissary $(EMISSARY_RELEASE)" \
 		GITEA_RELEASE_ATTACHMENTS="$$(find .gitea-release/* -type f)" \
 		tools/gitea-release/bin/gitea-release.sh
 

emissary_release.txt

@@ -1 +1 @@
-2024.3.13-stable.821.cec5c78
+2023.10.22-stable.848.327226a

install/emissary-files.mk

@@ -33,8 +33,6 @@ install-emissary-files: tools/yq/bin/yq tools/upx/bin/upx
 	tools/yq/bin/yq -i '.agent.controllers.app.downloadDir = "/data/emissary/apps/bundles"' files/etc/emissary/agent.yml
 	tools/yq/bin/yq -i '.sentry.dsn = "$${EMISSARY_SENTRY_DSN}"' files/etc/emissary/agent.yml
 	tools/yq/bin/yq -i '.sentry.environment = "$${EMISSARY_SENTRY_ENVIRONMENT}"' files/etc/emissary/agent.yml
-	tools/yq/bin/yq -i '.agent.controllers.status.claimURL = "$${EMISSARY_CONTROLLERS_STATUS_CLAIM_URL}"' files/etc/emissary/agent.yml
-	tools/yq/bin/yq -i '.agent.controllers.status.agentURL = "$${EMISSARY_CONTROLLERS_STATUS_AGENT_URL}"' files/etc/emissary/agent.yml
 
 	# Copy emissary binary
 	mkdir -p files/usr/local/bin

misc/common/uci-defaults/20-emissary-create-data-partition.sh

@@ -1,79 +0,0 @@
-#!/bin/sh
-
-MIN_DISK_SPACE_MB=1000
-
-list_disks() {
-    lsblk -o NAME -r -d -n
-}
-
-main() {
-    local disks=$(list_disks)
-
-    local found_free_space=0
-    local found_device=""
-
-    for device_name in ${disks}; do
-        local device="/dev/${device_name}"
-        echo "Checking disk '$device'..."
-        
-        local disk_free_space="$(parted $device unit MB print free 2>/dev/null | grep 'Free Space' | tail -n1 | awk '{ print $3 }')"
-        disk_free_space=${disk_free_space%MB}
-        disk_free_space=$(printf '%.0f' "${disk_free_space:-0}")
-        
-        echo "Free space on disk: ${disk_free_space}"
-
-        if [ ! -z "${disk_free_space}" ]; then
-            if [ ${disk_free_space} -gt ${found_free_space} ]; then
-                found_free_space=${disk_free_space}
-                found_device=${device}
-            fi
-        fi
-    done
-
-    if [ -z "${found_device}" ] || [ ${MIN_DISK_SPACE_MB} -gt ${found_free_space} ]; then
-        echo "No device with sufficient remaining disk space, exiting."
-        exit 1
-    fi
-
-    echo "Creating new partition on '${found_device}' with remaining disk free space"
-
-    local last_partition_end_mb=$(parted "$found_device" unit MB print | awk '/^ [0-9]+ / {start=$3} END {print int(start)}')
-    
-    if [ "${last_partition_end_mb}" != "0" ]; then
-        parted -s "${found_device}" -f -a opt mkpart primary "${last_partition_end_mb}MB" '100%'
-    else
-        parted -s "${found_device}" -f -a opt mkpart primary '0%' '100%'
-    fi
-
-    sync
-
-    local last_partition_number=$(parted ${found_device} print | grep -o -e '^ [0-9]*' | awk '{print $1}' | tail -n 1)
-    local new_partition_device=$(lsblk -r -n -o PARTN,NAME ${found_device} | awk -v partition_number="${last_partition_number}" '$1 == partition_number {print $2}')
-
-    mkfs.ext4 -F /dev/${new_partition_device}
-    if [ $? -ne 0 ]; then
-        echo "Could not initialize filesystem on new partition !"
-        exit 1
-    fi
-    
-    local new_partition_uuid=$(lsblk -r -n -o PARTN,UUID ${found_device} | awk -v partition_number="${last_partition_number}" '$1 == partition_number {print $2}')
-
-    if [ -z "${new_partition_uuid}" ]; then
-        echo "Could not find partition with number '${last_partition_number}' !"
-        exit 1
-    fi
-
-    umount -f /data
-    rm -rf /data
-    mkdir -p /data
-
-    uci add fstab mount
-    uci set fstab.@mount[-1].target='/data'
-    uci set fstab.@mount[-1].uuid=${new_partition_uuid}
-    uci set fstab.@mount[-1].enabled='1'
-    uci commit fstab
-
-    reload_config
-}
-
-main

misc/emissary/config/emissary

@@ -3,7 +3,5 @@ package emissary
 config main 'agent'
     option reconciliation_interval '60'
     option server_url 'https://emissary.cadol.es'
-    option claim_url 'https://emissary.cadol.es/hq/claim/%v'
-    option agent_url 'https://emissary.cadol.es/hq/agents/%v'
     option sentry_dsn ''
     option sentry_environment ''

misc/emissary/init.d/emissary-agent

@@ -1,30 +1,28 @@
 #!/bin/sh /etc/rc.common
 
 USE_PROCD=1
-START=99
+START=50
 STOP=50
 
 start_service() {
   config_load emissary
 
   mkdir -p /usr/share/emissary
-  mkdir -p /data/emissary
+  mkdir -p /var/lib/emissary
 
   config_get emissary_reconciliation_interval agent 'reconciliation_interval' "60"
   config_get emissary_server_url agent 'server_url' "https://emissary.cadol.es"
-  config_get emissary_agent_claim_url agent 'claim_url' "https://emissary.cadol.es/hq/claim/%v"
-  config_get emissary_agent_url agent 'agent_url' "https://emissary.cadol.es/hq/agents/%v"
   config_get emissary_sentry_dsn agent 'sentry_dsn' ""
   config_get emissary_sentry_environment agent 'sentry_environment' ""
 
   local config_file="/etc/emissary/agent.yml"
   procd_open_instance emissary-agent
-  procd_set_param env EMISSARY_SERVER_URL="$emissary_server_url" EMISSARY_RECONCILIATION_INTERVAL="$emissary_reconciliation_interval" EMISSARY_SENTRY_DSN="$emissary_sentry_dsn" EMISSARY_SENTRY_ENVIRONMENT="$emissary_sentry_environment" EMISSARY_CONTROLLERS_STATUS_CLAIM_URL="$emissary_agent_claim_url" EMISSARY_CONTROLLERS_STATUS_AGENT_URL="$emissary_agent_url"
+  procd_set_param env EMISSARY_SERVER_URL="$emissary_server_url" EMISSARY_RECONCILIATION_INTERVAL="$emissary_reconciliation_interval" EMISSARY_SENTRY_DSN="$emissary_sentry_dsn" EMISSARY_SENTRY_ENVIRONMENT="$emissary_sentry_environment"
   procd_set_param command /usr/local/bin/emissary
   procd_append_param command --workdir /usr/share/emissary
   procd_append_param command --config "$config_file"
   procd_append_param command agent run
-  procd_set_param respawn ${respawn_threshold:-3600} ${respawn_timeout:-5} ${respawn_retry:-17280}
+  procd_set_param respawn ${respawn_threshold:-3600} ${respawn_timeout:-5} ${respawn_retry:-5}
   procd_set_param file "$config_file"
   procd_set_param stdout 1
   procd_set_param stderr 1

misc/x86/uci-defaults/99-machine-id.sh

@@ -11,13 +11,14 @@ main() {
     fi
 
     # Accumulate data to create unique machine id
-    local random_uuid=$(cat /proc/sys/kernel/random/uuid)
+    local mac_addresses=$(cat /sys/class/net/*/address | uniq | sort)
+    local device_uuid=$(dmidecode | grep UUID)
 
     # Ensure destination directory
     mkdir -p "$(dirname "$machine_id_file")"
 
     # Generate SHA256 hash of data and save it to $machine_id_file
-    echo "$random_uuid" | sha256sum | cut -d ' ' -f1 > "$machine_id_file"
+    echo "$mac_adresses $device_uuid" | sha256sum | cut -d ' ' -f1 > "$machine_id_file"
 }
 
 main

packages.txt

@@ -1,8 +1,3 @@
 luci 
 openssh-server
-openssh-sftp-server
-parted
-lsblk
-e2fsprogs
-block-mount
-kmod-fs-ext4
+openssh-sftp-server

targets/bananapi.mk

@@ -2,6 +2,8 @@ all: bpi-r3
 
 bpi-r3:
 	$(MAKE) \
+		OPENWRT_VERSION="23.05.0-rc4" \
+		IMAGEBUILDER_URL=https://downloads.openwrt.org/releases/23.05.0-rc4/targets/mediatek/filogic/openwrt-imagebuilder-23.05.0-rc4-mediatek-filogic.Linux-x86_64.tar.xz \
 		ADDITIONAL_INSTALL="install-bpi-r3-network-config" \
 		ADDITIONAL_OPENWRT_PACKAGES="block-mount kmod-fs-ext4 kmod-usb-storage kmod-usb2" \
 		OPENWRT_TARGET="mediatek/filogic" \