typhoon/docs/cl/bare-metal.md

Bare-Metal

In this tutorial, we'll network boot and provision a Kubernetes v1.12.2 cluster on bare-metal with Container Linux.

First, we'll deploy a Matchbox service and setup a network boot environment. Then, we'll declare a Kubernetes cluster using the Typhoon Terraform module and power on machines. On PXE boot, machines will install Container Linux to disk, reboot into the disk install, and provision themselves as Kubernetes controllers or workers via Ignition.

Controllers are provisioned to run an etcd-member peer and a kubelet service. Workers run just a kubelet service. A one-time bootkube bootstrap schedules the apiserver, scheduler, controller-manager, and coredns on controllers and schedules kube-proxy and calico (or flannel) on every node. A generated kubeconfig provides kubectl access to the cluster.

Requirements

• Machines with 2GB RAM, 30GB disk, PXE-enabled NIC, IPMI
• PXE-enabled network boot environment
• Matchbox v0.6+ deployment with API enabled
• Matchbox credentials client.crt, client.key, ca.crt
• Terraform v0.11.x, terraform-provider-matchbox, and terraform-provider-ct installed locally

Machines

Collect a MAC address from each machine. For machines with multiple PXE-enabled NICs, pick one of the MAC addresses. MAC addresses will be used to match machines to profiles during network boot.

• 52:54:00:a1:9c:ae (node1)
• 52:54:00:b2:2f:86 (node2)
• 52:54:00:c3:61:77 (node3)

Configure each machine to boot from the disk through IPMI or the BIOS menu.

ipmitool -H node1 -U USER -P PASS chassis bootdev disk options=persistent

During provisioning, you'll explicitly set the boot device to pxe for the next boot only. Machines will install (overwrite) the operating system to disk on PXE boot and reboot into the disk install.

!!! tip "" Ask your hardware vendor to provide MACs and preconfigure IPMI, if possible. With it, you can rack new servers, terraform apply with new info, and power on machines that network boot and provision into clusters.

DNS

Create a DNS A (or AAAA) record for each node's default interface. Create a record that resolves to each controller node (or re-use the node record if there's one controller).

• node1.example.com (node1)
• node2.example.com (node2)
• node3.example.com (node3)
• myk8s.example.com (node1)

Cluster nodes will be configured to refer to the control plane and themselves by these fully qualified names and they'll be used in generated TLS certificates.

Matchbox

Matchbox is an open-source app that matches network-booted bare-metal machines (based on labels like MAC, UUID, etc.) to profiles to automate cluster provisioning.

Install Matchbox on a Kubernetes cluster or dedicated server.

• Installing on Kubernetes (recommended)
• Installing on a server

!!! tip Deploy Matchbox as service that can be accessed by all of your bare-metal machines globally. This provides a single endpoint to use Terraform to manage bare-metal clusters at different sites. Typhoon will never include secrets in provisioning user-data so you may even deploy matchbox publicly.

Matchbox provides a TLS client-authenticated API that clients, like Terraform, can use to manage machine matching and profiles. Think of it like a cloud provider API, but for creating bare-metal instances.

Generate TLS client credentials. Save the ca.crt, client.crt, and client.key where they can be referenced in Terraform configs.

mv ca.crt client.crt client.key ~/.config/matchbox/

Verify the matchbox read-only HTTP endpoints are accessible (port is configurable).

$ curl http://matchbox.example.com:8080
matchbox

Verify your TLS client certificate and key can be used to access the Matchbox API (port is configurable).

$ openssl s_client -connect matchbox.example.com:8081 \
  -CAfile ~/.config/matchbox/ca.crt \
  -cert ~/.config/matchbox/client.crt \
  -key ~/.config/matchbox/client.key

PXE Environment

Create a iPXE-enabled network boot environment. Configure PXE clients to chainload iPXE and instruct iPXE clients to chainload from your Matchbox service's /boot.ipxe endpoint.

For networks already supporting iPXE clients, you can add a default.ipxe config.

# /var/www/html/ipxe/default.ipxe
chain http://matchbox.foo:8080/boot.ipxe

For networks with Ubiquiti Routers, you can configure the router itself to chainload machines to iPXE and Matchbox.

For a small lab, you may wish to checkout the quay.io/coreos/dnsmasq container image and copy-paste examples.

Read about the many ways to setup a compliant iPXE-enabled network. There is quite a bit of flexibility:

• Continue using existing DHCP, TFTP, or DNS services
• Configure specific machines, subnets, or architectures to chainload from Matchbox
• Place Matchbox behind a menu entry (timeout and default to Matchbox)

!!! note "" TFTP chainloading to modern boot firmware, like iPXE, avoids issues with old NICs and allows faster transfer protocols like HTTP to be used.

Terraform Setup

Install Terraform v0.11.x on your system.

$ terraform version
Terraform v0.11.7

Add the terraform-provider-matchbox plugin binary for your system.

wget https://github.com/coreos/terraform-provider-matchbox/releases/download/v0.2.2/terraform-provider-matchbox-v0.2.2-linux-amd64.tar.gz
tar xzf terraform-provider-matchbox-v0.2.2-linux-amd64.tar.gz
sudo mv terraform-provider-matchbox-v0.2.2-linux-amd64/terraform-provider-matchbox /usr/local/bin/

Add the terraform-provider-ct plugin binary for your system.

wget https://github.com/coreos/terraform-provider-ct/releases/download/v0.2.1/terraform-provider-ct-v0.2.1-linux-amd64.tar.gz
tar xzf terraform-provider-ct-v0.2.1-linux-amd64.tar.gz
sudo mv terraform-provider-ct-v0.2.1-linux-amd64/terraform-provider-ct /usr/local/bin/

Add the plugin to your ~/.terraformrc.

providers {
  matchbox = "/usr/local/bin/terraform-provider-matchbox"
}

Read concepts to learn about Terraform, modules, and organizing resources. Change to your infrastructure repository (e.g. infra).

cd infra/clusters

Provider

Configure the Matchbox provider to use your Matchbox API endpoint and client certificate in a providers.tf file.

provider "matchbox" {
  endpoint    = "matchbox.example.com:8081"
  client_cert = "${file("~/.config/matchbox/client.crt")}"
  client_key  = "${file("~/.config/matchbox/client.key")}"
  ca          = "${file("~/.config/matchbox/ca.crt")}"
}

provider "local" {
  version = "~> 1.0"
  alias = "default"
}

provider "null" {
  version = "~> 1.0"
  alias = "default"
}

provider "template" {
  version = "~> 1.0"
  alias = "default"
}

provider "tls" {
  version = "~> 1.0"
  alias = "default"
}

Cluster

Define a Kubernetes cluster using the module bare-metal/container-linux/kubernetes.

module "bare-metal-mercury" {
  source = "git::https://github.com/poseidon/typhoon//bare-metal/container-linux/kubernetes?ref=v1.12.2"
  
  providers = {
    local = "local.default"
    null = "null.default"
    template = "template.default"
    tls = "tls.default"
  }
  
  # bare-metal
  cluster_name            = "mercury"
  matchbox_http_endpoint  = "http://matchbox.example.com"
  os_channel              = "coreos-stable"
  os_version              = "1632.3.0"

  # configuration
  k8s_domain_name    = "node1.example.com"
  ssh_authorized_key = "ssh-rsa AAAAB3Nz..."
  asset_dir          = "/home/user/.secrets/clusters/mercury"

  # machines
  controller_names   = ["node1"]
  controller_macs    = ["52:54:00:a1:9c:ae"]
  controller_domains = ["node1.example.com"]
  worker_names = [
    "node2",
    "node3",
  ]
  worker_macs = [
    "52:54:00:b2:2f:86",
    "52:54:00:c3:61:77",
  ]
  worker_domains = [
    "node2.example.com",
    "node3.example.com",
  ]
}

Reference the variables docs or the variables.tf source.

ssh-agent

Initial bootstrapping requires bootkube.service be started on one controller node. Terraform uses ssh-agent to automate this step. Add your SSH private key to ssh-agent.

ssh-add ~/.ssh/id_rsa
ssh-add -L

Apply

Initialize the config directory if this is the first use with Terraform.

terraform init

Plan the resources to be created.

$ terraform plan
Plan: 55 to add, 0 to change, 0 to destroy.

Apply the changes. Terraform will generate bootkube assets to asset_dir and create Matchbox profiles (e.g. controller, worker) and matching rules via the Matchbox API.

$ terraform apply
module.bare-metal-mercury.null_resource.copy-kubeconfig.0: Provisioning with 'file'...
module.bare-metal-mercury.null_resource.copy-etcd-secrets.0: Provisioning with 'file'...
module.bare-metal-mercury.null_resource.copy-kubeconfig.0: Still creating... (10s elapsed)
module.bare-metal-mercury.null_resource.copy-etcd-secrets.0: Still creating... (10s elapsed)
...

Apply will then loop until it can successfully copy credentials to each machine and start the one-time Kubernetes bootstrap service. Proceed to the next step while this loops.

Power

Power on each machine with the boot device set to pxe for the next boot only.

ipmitool -H node1.example.com -U USER -P PASS chassis bootdev pxe
ipmitool -H node1.example.com -U USER -P PASS power on

Machines will network boot, install Container Linux to disk, reboot into the disk install, and provision themselves as controllers or workers.

!!! tip "" If this is the first test of your PXE-enabled network boot environment, watch the SOL console of a machine to spot any misconfigurations.

Bootstrap

Wait for the bootkube-start step to finish bootstrapping the Kubernetes control plane. This may take 5-15 minutes depending on your network.

module.bare-metal-mercury.null_resource.bootkube-start: Still creating... (6m10s elapsed)
module.bare-metal-mercury.null_resource.bootkube-start: Still creating... (6m20s elapsed)
module.bare-metal-mercury.null_resource.bootkube-start: Still creating... (6m30s elapsed)
module.bare-metal-mercury.null_resource.bootkube-start: Still creating... (6m40s elapsed)
module.bare-metal-mercury.null_resource.bootkube-start: Creation complete (ID: 5441741360626669024)

Apply complete! Resources: 55 added, 0 changed, 0 destroyed.

To watch the install to disk (until machines reboot from disk), SSH to port 2222.

# before v1.12.2
$ ssh debug@node1.example.com
# after v1.12.2
$ ssh -p 2222 core@node1.example.com

To watch the bootstrap process in detail, SSH to the first controller and journal the logs.

$ ssh core@node1.example.com
$ journalctl -f -u bootkube
bootkube[5]:         Pod Status:        pod-checkpointer        Running
bootkube[5]:         Pod Status:          kube-apiserver        Running
bootkube[5]:         Pod Status:          kube-scheduler        Running
bootkube[5]:         Pod Status: kube-controller-manager        Running
bootkube[5]: All self-hosted control plane components successfully started
bootkube[5]: Tearing down temporary bootstrap control plane...

Verify

Install kubectl on your system. Use the generated kubeconfig credentials to access the Kubernetes cluster and list nodes.

$ export KUBECONFIG=/home/user/.secrets/clusters/mercury/auth/kubeconfig
$ kubectl get nodes
NAME                STATUS  ROLES              AGE  VERSION
node1.example.com   Ready   controller,master  10m  v1.12.2
node2.example.com   Ready   node               10m  v1.12.2
node3.example.com   Ready   node               10m  v1.12.2

List the pods.

$ kubectl get pods --all-namespaces
NAMESPACE     NAME                                       READY     STATUS    RESTARTS   AGE
kube-system   calico-node-6qp7f                          2/2       Running   1          11m
kube-system   calico-node-gnjrm                          2/2       Running   0          11m
kube-system   calico-node-llbgt                          2/2       Running   0          11m
kube-system   coredns-1187388186-dj3pd                   1/1       Running   0          11m
kube-system   coredns-1187388186-mx9rt                   1/1       Running   0          11m
kube-system   kube-apiserver-7336w                       1/1       Running   0          11m
kube-system   kube-controller-manager-3271970485-b9chx   1/1       Running   0          11m
kube-system   kube-controller-manager-3271970485-v30js   1/1       Running   1          11m
kube-system   kube-proxy-50sd4                           1/1       Running   0          11m
kube-system   kube-proxy-bczhp                           1/1       Running   0          11m
kube-system   kube-proxy-mp2fw                           1/1       Running   0          11m
kube-system   kube-scheduler-3895335239-fd3l7            1/1       Running   1          11m
kube-system   kube-scheduler-3895335239-hfjv0            1/1       Running   0          11m
kube-system   pod-checkpointer-wf65d                     1/1       Running   0          11m
kube-system   pod-checkpointer-wf65d-node1.example.com   1/1       Running   0          11m

Going Further

Learn about maintenance and addons.

!!! note On Container Linux clusters, install the CLUO addon to coordinate reboots and drains when nodes auto-update. Otherwise, updates may not be applied until the next reboot.

Variables

Check the variables.tf source.

Required

Name	Description	Example
cluster_name	Unique cluster name	mercury
matchbox_http_endpoint	Matchbox HTTP read-only endpoint	http://matchbox.example.com:port
os_channel	Channel for a Container Linux derivative	coreos-stable, coreos-beta, coreos-alpha, flatcar-stable, flatcar-beta, flatcar-alpha
os_version	Version for a Container Linux derivative to PXE and install	1632.3.0
k8s_domain_name	FQDN resolving to the controller(s) nodes. Workers and kubectl will communicate with this endpoint	"myk8s.example.com"
ssh_authorized_key	SSH public key for user 'core'	"ssh-rsa AAAAB3Nz..."
asset_dir	Path to a directory where generated assets should be placed (contains secrets)	"/home/user/.secrets/clusters/mercury"
controller_names	Ordered list of controller short names	["node1"]
controller_macs	Ordered list of controller identifying MAC addresses	["52:54:00:a1:9c:ae"]
controller_domains	Ordered list of controller FQDNs	["node1.example.com"]
worker_names	Ordered list of worker short names	["node2", "node3"]
worker_macs	Ordered list of worker identifying MAC addresses	["52:54:00:b2:2f:86", "52:54:00:c3:61:77"]
worker_domains	Ordered list of worker FQDNs	["node2.example.com", "node3.example.com"]

Optional

Name	Description	Default	Example
cached_install	PXE boot and install from the Matchbox /assets cache. Admin MUST have downloaded Container Linux or Flatcar images into the cache	false	true
install_disk	Disk device where Container Linux should be installed	"/dev/sda"	"/dev/sdb"
networking	Choice of networking provider	"calico"	"calico" or "flannel"
network_mtu	CNI interface MTU (calico-only)	1480	-
clc_snippets	Map from machine names to lists of Container Linux Config snippets	{}	example
network_ip_autodetection_method	Method to detect host IPv4 address (calico-only)	first-found	can-reach=10.0.0.1
pod_cidr	CIDR IPv4 range to assign to Kubernetes pods	"10.2.0.0/16"	"10.22.0.0/16"
service_cidr	CIDR IPv4 range to assign to Kubernetes services	"10.3.0.0/16"	"10.3.0.0/24"
cluster_domain_suffix	FQDN suffix for Kubernetes services answered by coredns.	"cluster.local"	"k8s.example.com"
kernel_args	Additional kernel args to provide at PXE boot	[]	"kvm-intel.nested=1"