* Set Kubelet cgroup driver to systemd when Flatcar Linux edge
is chosen
Note: Typhoon module status assumes use of the stable variant of
an OS channel/stream. Its possible to use earlier variants and
those are sometimes tested or developed against, but stable is
the recommendation
* In v1.18.3, the `os_stream` variable was added to select
a Fedora CoreOS image stream (stable, testing, next) on
AWS and Google Cloud (which publish official streams)
* Remove `os_image` variable deprecated in v1.18.3. Manually
uploaded images are no longer needed
* DigitalOcean introduced Virtual Private Cloud (VPC) support
to match other clouds and enhance the prior "private networking"
feature. Before, droplet's belonging to different clusters (but
residing in the same region) could reach one another (although
Typhoon firewall rules prohibit this). Now, droplets in a VPC
reside in their own network
* https://www.digitalocean.com/docs/networking/vpc/
* Create droplet instances in a VPC per cluster. This matches the
design of Typhoon AWS, Azure, and GCP.
* Require `terraform-provider-digitalocean` v1.16.0+ (action required)
* Output `vpc_id` for use with an attached DigitalOcean
loadbalancer
* Change the Calico VXLAN interface for MTU from 1450 to 1410
* VXLAN on Azure should support MTU 1450. However, there is
history where performance measures have shown that 1410 is
needed to have expected performance. Flatcar Linux has the
same MTU 1410 override and note
* FCOS 31.20200323.3.2 was known to perform fine with 1450, but
now in 31.20200517.3.0 the right value seems to be 1410
* Fedora CoreOS `kubelet.service` can start before the hostname
is set. Kubelet reads the hostname to determine the node name to
register. If the hostname was read as localhost, Kubelet will
continue trying to register as localhost (problem)
* This race manifests as a node that appears NotReady, the Kubelet
is trying to register as localhost, while the host itself (by then)
has an AWS provided hostname. Restarting kubelet.service is a
manual fix so Kubelet re-reads the hostname
* This race could only be shown on AWS, not on Google Cloud or
Azure despite attempts. Bare-metal and DigitalOcean differ and
use hostname-override (e.g. afterburn) so they're not affected
* Wait for nodes to have a non-localhost hostname in the oneshot
that awaits /etc/resolve.conf. Typhoon has no valid cases for a
node hostname being localhost (not even single-node clusters)
Related Openshift: https://github.com/openshift/machine-config-operator/pull/1813
Close https://github.com/poseidon/typhoon/issues/765
* Remove node label `node.kubernetes.io/master` from controller nodes
* Use `node.kubernetes.io/controller` (present since v1.9.5,
[#160](https://github.com/poseidon/typhoon/pull/160)) to node select controllers
* Rename controller NoSchedule taint from `node-role.kubernetes.io/master` to
`node-role.kubernetes.io/controller`
* Tolerate the new taint name for workloads that may run on controller nodes
and stop tolerating `node-role.kubernetes.io/master` taint
* Kubelet `--lock-file` and `--exit-on-lock-contention` date
back to usage of bootkube and at one point running Kubelet
in a "self-hosted" style whereby an on-host Kubelet (rkt)
started pods, but then a Kubelet DaemonSet was scheduled
and able to take over (hence self-hosted). `lock-file` and
`exit-on-lock-contention` flags supported this pivot. The
pattern has been out of favor (in bootkube too) for years
because of dueling Kubelet complexity
* Typhoon runs Kubelet as a container via an on-host systemd
unit using podman (Fedora CoreOS) or rkt (Flatcar Linux). In
fact, Typhoon no longer uses bootkube or control plane pivot
(let alone Kubelet pivot) and uses static pods since v1.16.0
* https://github.com/poseidon/typhoon/pull/536
* Enable terraform-provider-ct `strict` mode for parsing
Container Linux Configs and snippets
* Fix Container Linux Config systemd unit syntax `enable`
(old) to `enabled`
* Align with Fedora CoreOS which uses strict mode already
* Build Kubelet container images internally and publish
to Quay and Dockerhub (new) as an alternative in case of
registry outage or breach
* Use our infra to provide single and multi-arch (default)
Kublet images for possible future use
* Docs: Show how to use alternative Kubelet images via
snippets and a systemd dropin (builds on #737)
Changes:
* Update docs with changes to Kubelet image building
* If you prefer to trust images built by Quay/Dockerhub,
automated image builds are still available with unique
tags (albeit with some limitations):
* Quay automated builds are tagged `build-{short_sha}`
(limit: only amd64)
* Dockerhub automated builts are tagged `build-{tag}`
and `build-master` (limit: only amd64, no shas)
Links:
* Kubelet: https://github.com/poseidon/kubelet
* Docs: https://typhoon.psdn.io/topics/security/#container-images
* Registries:
* quay.io/poseidon/kubelet
* docker.io/psdn/kubelet
* Promote DigitalOcean from alpha to beta for Fedora
CoreOS and Flatcar Linux
* Upgrade mkdocs-material and PyPI packages for docs
* Replace docs mentions of Container Linux with Flatcar
Linux and move docs/cl to docs/flatcar-linux
* Deprecate CoreOS Container Linux support. Its still
usable for some time, but start removing docs
* Set a consistent MCS level/range for Calico install-cni
* Note: Rebooting a node was a workaround, because Kubelet
relabels /etc/kubernetes(/cni/net.d)
Background:
* On SELinux enforcing systems, the Calico CNI install-cni
container ran with default SELinux context and a random MCS
pair. install-cni places CNI configs by first creating a
temporary file and then moving them into place, which means
the file MCS categories depend on the containers SELinux
context.
* calico-node Pod restarts creates a new install-cni container
with a different MCS pair that cannot access the earlier
written file (it places configs every time), causing the
init container to error and calico-node to crash loop
* https://github.com/projectcalico/cni-plugin/issues/874
```
mv: inter-device move failed: '/calico.conf.tmp' to
'/host/etc/cni/net.d/10-calico.conflist'; unable to remove target:
Permission denied
Failed to mv files. This may be caused by selinux configuration on
the
host, or something else.
```
Note, this isn't a host SELinux configuration issue.
Related:
* https://github.com/poseidon/terraform-render-bootstrap/pull/186
* Enable bootstrap token authentication on kube-apiserver
* Generate the bootstrap.kubernetes.io/token Secret that
may be used as a bootstrap token
* Generate a bootstrap kubeconfig (with a bootstrap token)
to be securely distributed to nodes. Each Kubelet will use
the bootstrap kubeconfig to authenticate to kube-apiserver
as `system:bootstrappers` and send a node-unique CSR for
kube-controller-manager to automatically approve to issue
a Kubelet certificate and kubeconfig (expires in 72 hours)
* Add ClusterRoleBinding for bootstrap token subjects
(`system:bootstrappers`) to have the `system:node-bootstrapper`
ClusterRole
* Add ClusterRoleBinding for bootstrap token subjects
(`system:bootstrappers`) to have the csr nodeclient ClusterRole
* Add ClusterRoleBinding for bootstrap token subjects
(`system:bootstrappers`) to have the csr selfnodeclient ClusterRole
* Enable NodeRestriction admission controller to limit the
scope of Node or Pod objects a Kubelet can modify to those of
the node itself
* Ability for a Kubelet to delete its Node object is retained
as preemptible nodes or those in auto-scaling instance groups
need to be able to remove themselves on shutdown. This need
continues to have precedence over any risk of a node deleting
itself maliciously
Security notes:
1. Issued Kubelet certificates authenticate as user `system:node:NAME`
and group `system:nodes` and are limited in their authorization
to perform API operations by Node authorization and NodeRestriction
admission. Previously, a Kubelet's authorization was broader. This
is the primary security motivation.
2. The bootstrap kubeconfig credential has the same sensitivity
as the previous generated TLS client-certificate kubeconfig.
It must be distributed securely to nodes. Its compromise still
allows an attacker to obtain a Kubelet kubeconfig
3. Bootstrapping Kubelet kubeconfig's with a limited lifetime offers
a slight security improvement.
* An attacker who obtains the kubeconfig can likely obtain the
bootstrap kubeconfig as well, to obtain the ability to renew
their access
* A compromised bootstrap kubeconfig could plausibly be handled
by replacing the bootstrap token Secret, distributing the token
to new nodes, and expiration. Whereas a compromised TLS-client
certificate kubeconfig can't be revoked (no CRL). However,
replacing a bootstrap token can be impractical in real cluster
environments, so the limited lifetime is mostly a theoretical
benefit.
* Cluster CSR objects are visible via kubectl which is nice
4. Bootstrapping node-unique Kubelet kubeconfigs means Kubelet
clients have more identity information, which can improve the
utility of audits and future features
Rel: https://kubernetes.io/docs/reference/command-line-tools-reference/kubelet-tls-bootstrapping/
Rel: https://github.com/poseidon/terraform-render-bootstrap/pull/185
* DigitalOcean firewall rules should reference Terraform tag
resources rather than using tag strings. Otherwise, terraform
apply can fail (neeeds rerun) if a tag has not yet been created
* Race: During initial bootstrap, static control plane pods
could hang with Permission denied to bootstrap secrets. A
manual fix involved restarting Kubelet, which relabeled mounts
The race had no effect on subsequent reboots.
* bootstrap.service runs podman with a private unshared mount
of /etc/kubernetes/bootstrap-secrets which uses an SELinux MCS
label with a category pair. However, bootstrap-secrets should
be shared as its mounted by Docker pods kube-apiserver,
kube-scheduler, and kube-controller-manager. Restarting Kubelet
was a manual fix because Kubelet relabels all /etc/kubernetes
* Fix bootstrap Pod to use the shared volume label, which leaves
bootstrap-secrets files with SELinux level s0 without MCS
* Also allow failed bootstrap.service to be re-applied. This was
missing on bare-metal and AWS
* Initial support for Flatcar Linux on Azure used the Flatcar
Linux Azure Marketplace images (e.g. `flatcar-stable`) in
https://github.com/poseidon/typhoon/pull/664
* Flatcar Linux Azure Marketplace images have some unresolved
items https://github.com/poseidon/typhoon/issues/703
* Until the Marketplace items are resolved, revert to requiring
Flatcar Linux's images be manually uploaded (like GCP and
DigitalOcean)
* No change to Fedora CoreOS modules
* For Container Linx AWS and Azure, change the `os_image` default
from coreos-stable to flatcar-stable
* For Container Linux GCP and DigitalOcean, change `os_image` to
be required since users should upload a Flatcar Linux image and
set the variable
* For Container Linux bare-metal, recommend users change the
`os_channel` to Flatcar Linux. No actual module change.
* Add "lb" outbound rule for worker TCP _and_ UDP traffic
* Fix Azure worker nodes clock synchronization being inactive
due to timeouts reaching the CoreOS / Flatcar NTP pool
* Fix Azure worker nodes not providing outbount UDP connectivity
Background:
Azure provides VMs outbound connectivity either by having a public
IP or via an SNAT masquerade feature bundled with their virtual
load balancing abstraction (in contrast with, say, a NAT gateway).
Azure worker nodes have only a private IP, but are associated with
the cluster load balancer's backend pool and ingress frontend IP.
Outbound traffic uses SNAT with this frontend IP. A subtle detail
with Azure SNAT seems to be that since both inbound lb_rule's are
TCP only, outbound UDP traffic isn't SNAT'd (highlights the reasons
Azure shouldn't have conflated inbound load balancing with outbound
SNAT concepts). However, adding a separate outbound rule and
disabling outbound SNAT on our ingress lb_rule's we can tell Azure
to continue load balancing as before, and support outbound SNAT for
worker traffic of both the TCP and UDP protocol.
Fixes clock synchronization timeouts:
```
systemd-timesyncd[786]: Timed out waiting for reply from
45.79.36.123:123 (3.flatcar.pool.ntp.org)
```
Azure controller nodes have their own public IP, so controllers (and
etcd) nodes have not had clock synchronization or outbound UDP issues
* Fix bootstrap error for missing `manifests-networking/crd*yaml`
when `networking = "flannel"`
* Cleanup manifest-networking directory left during bootstrap
* Regressed in v1.18.0 changes for Calico https://github.com/poseidon/typhoon/pull/675
* Change kube-proxy, flannel, and calico-node DaemonSet
tolerations to tolerate `node.kubernetes.io/not-ready`
and `node-role.kubernetes.io/master` (i.e. controllers)
explicitly, rather than tolerating all taints
* kube-system DaemonSets will no longer tolerate custom
node taints by default. Instead, custom node taints must
be enumerated to opt-in to scheduling/executing the
kube-system DaemonSets
* Consider setting the daemonset_tolerations variable
of terraform-render-bootstrap at a later date
Background: Tolerating all taints ruled out use-cases
where certain nodes might legitimately need to keep
kube-proxy or CNI networking disabled
Related: https://github.com/poseidon/terraform-render-bootstrap/pull/179
* Problem: Fedora CoreOS images are manually uploaded to GCP. When a
cluster is created with a stale image, Zincati immediately checks
for the latest stable image, fetches, and reboots. In practice,
this can unfortunately occur exactly during the initial cluster
bootstrap phase.
* Recommended: Upload the latest Fedora CoreOS image regularly
* Mitigation: Allow a failed bootstrap.service run (which won't touch
the done ConditionalPathExists) to be re-run by running `terraforma apply`
again. Add a known issue to CHANGES
* Update docs to show the current Fedora CoreOS stable version to
reduce likelihood users see this issue
Longer term ideas:
* Ideal: Fedora CoreOS publishes a stable channel. Instances will always
boot with the latest image in a channel. The problem disappears since
it works the same way AWS does
* Timer: Consider some timer-based approach to have zincati delay any
system reboots for the first ~30 min of a machine's life. Possibly just
configured on the controller node https://github.com/coreos/zincati/pull/251
* External coordination: For Container Linux, locksmith filled a similar
role and was disabled to allow CLUO to coordinate reboots. By running
atop Kubernetes, it was not possible for the reboot to occur before
cluster bootstrap
* Rely on https://github.com/coreos/zincati/issues/115 to delay the
reboot since bootstrap involves an SSH session
* Use path-based activation of zincati on controllers and set that
path at the end of the bootstrap process
Rel: https://github.com/coreos/fedora-coreos-tracker/issues/239
* Fix issue observed in us-east-1 where AMI filters chose the
latest testing channel release, rather than the stable chanel
* Fedora CoreOS AMI filter selects the latest image with a
matching name, x86_64, and hvm, excluding dev images. Add a
filter for "Fedora CoreOS stable", which seems to be the only
distinguishing metadata indicating the channel
* Recommend that users who have not yet tried Fedora CoreOS or
Flatcar Linux do so. Likely, Container Linux will reach EOL
and platform support / stability ratings will be in a mixed
state. Nevertheless, folks should migrate by September.
* Before Kubernetes v1.18.0, Kubelet only supported kubectl
`--limit-bytes` with the Docker `json-file` log driver so
the Fedora CoreOS default was overridden for conformance.
See https://github.com/poseidon/typhoon/pull/642
* Kubelet v1.18+ implemented support for other docker log
drivers, so the Fedora CoreOS default `journald` can be
used again
Rel: https://github.com/kubernetes/kubernetes/issues/86367
* Remove docs for the `asset_dir` variable and deprecate
it in CHANGES. It will be removed in an upcoming release
* Typhoon v1.17.0 introduced a new mechanism for managing
and distributing generated assets that stopped relying on
writing out to disk. `asset_dir` became optional and
defaulted to being unset / off (recommended)
* Kubernetes plans to stop releasing the hyperkube container image
* Upstream will continue to publish `kube-apiserver`, `kube-controller-manager`,
`kube-scheduler`, and `kube-proxy` container images to `k8s.gcr.io`
* Upstream will publish Kubelet only as a binary for distros to package,
either as a DEB/RPM on traditional distros or a container image on
container-optimized operating systems
* Typhoon will package the upstream Kubelet (checksummed) and its
dependencies as a container image for use on CoreOS Container Linux,
Flatcar Linux, and Fedora CoreOS
* Update the Typhoon container image security policy to list
`quay.io/poseidon/kubelet`as an official distributed artifact
Hyperkube: https://github.com/kubernetes/kubernetes/pull/88676
Kubelet Container Image: https://github.com/poseidon/kubelet
Kubelet Quay Repo: https://quay.io/repository/poseidon/kubelet
* Stop providing example manifests for the Container Linux
Update Operator (CLUO)
* CLUO requires patches to support Kubernetes v1.16+, but the
project and push access is rather unowned
* CLUO hasn't been in active use in our clusters and won't be
relevant beyond Container Linux. Not to say folks can't patch
it and run it on their own. Examples just aren't provided here
Related: https://github.com/coreos/container-linux-update-operator/pull/197
* Accept `os_image` "flatcar-stable" and "flatcar-beta" to
use Kinvolk's Flatcar Linux images from the Azure Marketplace
Note: Flatcar Linux Azure Marketplace images require terms be
accepted before use
* Add `worker_node_labels` map from node name to a list of initial
node label strings
* Add `worker_node_taints` map from node name to a list of initial
node taint strings
* Unlike cloud platforms, bare-metal node labels and taints
are defined via a map from node name to list of labels/taints.
Bare-metal clusters may have heterogeneous hardware so per node
labels and taints are accepted
* Only worker node names are allowed. Workloads are not scheduled
on controller nodes so altering their labels/taints isn't suitable
```
module "mercury" {
...
worker_node_labels = {
"node2" = ["role=special"]
}
worker_node_taints = {
"node2" = ["role=special:NoSchedule"]
}
}
```
Related: https://github.com/poseidon/typhoon/issues/429
* Add support for `terraform-provider-azurerm` v2.0+. Require
`terraform-provider-azurerm` v2.0+ and drop v1.x support since
the Azure provider major release is not backwards compatible
* Use Azure's new Linux VM and Linux VM Scale Set resources
* Change controller's Azure disk caching to None
* Associate subnets (in addition to NICs) with security groups
(aesthetic)
* If set, change `worker_priority` from `Low` to `Spot` (action required)
Related:
* https://www.terraform.io/docs/providers/azurerm/guides/2.0-upgrade-guide.html
* Add 2 min wait before KubeNodeUnreachable to be less
noisy on premeptible clusters
* Add a BlackboxProbeFailure alert for any failing probes
for services annotated `prometheus.io/probe: true`
* Quay has historically generated ACI signatures for images to
facilitate rkt's notions of verification (it allowed authors to
actually sign images, though `--trust-keys-from-https` is in use
since etcd and most authors don't sign images). OCI standardization
didn't adopt verification ideas and checking signatures has fallen
out of favor.
* Fix an issue where Quay no longer seems to be generating ACI
signatures for new images (e.g. quay.io/coreos/etcd:v.3.4.4)
* Don't be alarmed by rkt `--insecure-options=image`. It refers
to disabling image signature checking (i.e. docker pull doesn't
check signatures either)
* System containers for Kubelet and bootstrap have transitioned
to the docker:// transport, so there is precedent and this brings
all the system containers on Container Linux controllers into
alignment
* On clouds where workers can scale down or be preempted
(AWS, GCP, Azure), shutdown runs delete-node.service to
remove a node a prevent NotReady nodes from lingering
* Add the delete-node.service that wasn't carried over
from Container Linux and port it to use podman
Dalton Hubble