* No change to Fedora CoreOS modules
* For Container Linx AWS and Azure, change the `os_image` default
from coreos-stable to flatcar-stable
* For Container Linux GCP and DigitalOcean, change `os_image` to
be required since users should upload a Flatcar Linux image and
set the variable
* For Container Linux bare-metal, recommend users change the
`os_channel` to Flatcar Linux. No actual module change.
* Add "lb" outbound rule for worker TCP _and_ UDP traffic
* Fix Azure worker nodes clock synchronization being inactive
due to timeouts reaching the CoreOS / Flatcar NTP pool
* Fix Azure worker nodes not providing outbount UDP connectivity
Background:
Azure provides VMs outbound connectivity either by having a public
IP or via an SNAT masquerade feature bundled with their virtual
load balancing abstraction (in contrast with, say, a NAT gateway).
Azure worker nodes have only a private IP, but are associated with
the cluster load balancer's backend pool and ingress frontend IP.
Outbound traffic uses SNAT with this frontend IP. A subtle detail
with Azure SNAT seems to be that since both inbound lb_rule's are
TCP only, outbound UDP traffic isn't SNAT'd (highlights the reasons
Azure shouldn't have conflated inbound load balancing with outbound
SNAT concepts). However, adding a separate outbound rule and
disabling outbound SNAT on our ingress lb_rule's we can tell Azure
to continue load balancing as before, and support outbound SNAT for
worker traffic of both the TCP and UDP protocol.
Fixes clock synchronization timeouts:
```
systemd-timesyncd[786]: Timed out waiting for reply from
45.79.36.123:123 (3.flatcar.pool.ntp.org)
```
Azure controller nodes have their own public IP, so controllers (and
etcd) nodes have not had clock synchronization or outbound UDP issues
* Fix bootstrap error for missing `manifests-networking/crd*yaml`
when `networking = "flannel"`
* Cleanup manifest-networking directory left during bootstrap
* Regressed in v1.18.0 changes for Calico https://github.com/poseidon/typhoon/pull/675
* Change kube-proxy, flannel, and calico-node DaemonSet
tolerations to tolerate `node.kubernetes.io/not-ready`
and `node-role.kubernetes.io/master` (i.e. controllers)
explicitly, rather than tolerating all taints
* kube-system DaemonSets will no longer tolerate custom
node taints by default. Instead, custom node taints must
be enumerated to opt-in to scheduling/executing the
kube-system DaemonSets
* Consider setting the daemonset_tolerations variable
of terraform-render-bootstrap at a later date
Background: Tolerating all taints ruled out use-cases
where certain nodes might legitimately need to keep
kube-proxy or CNI networking disabled
Related: https://github.com/poseidon/terraform-render-bootstrap/pull/179
* Fix delete-node service that runs on worker (cloud-only)
shutdown to delete a Kubernetes node. Regressed in #669
(unreleased)
* Use rkt `--exec` to invoke kubectl binary in the kubelet
image
* Use podman `--entrypoint` to invoke the kubectl binary in
the kubelet image
* Kubernetes plans to stop releasing the hyperkube container image
* Upstream will continue to publish `kube-apiserver`, `kube-controller-manager`,
`kube-scheduler`, and `kube-proxy` container images to `k8s.gcr.io`
* Upstream will publish Kubelet only as a binary for distros to package,
either as a DEB/RPM on traditional distros or a container image on
container-optimized operating systems
* Typhoon will package the upstream Kubelet (checksummed) and its
dependencies as a container image for use on CoreOS Container Linux,
Flatcar Linux, and Fedora CoreOS
* Update the Typhoon container image security policy to list
`quay.io/poseidon/kubelet`as an official distributed artifact
Hyperkube: https://github.com/kubernetes/kubernetes/pull/88676
Kubelet Container Image: https://github.com/poseidon/kubelet
Kubelet Quay Repo: https://quay.io/repository/poseidon/kubelet
* Accept `os_image` "flatcar-stable" and "flatcar-beta" to
use Kinvolk's Flatcar Linux images from the Azure Marketplace
Note: Flatcar Linux Azure Marketplace images require terms be
accepted before use
* Add support for `terraform-provider-azurerm` v2.0+. Require
`terraform-provider-azurerm` v2.0+ and drop v1.x support since
the Azure provider major release is not backwards compatible
* Use Azure's new Linux VM and Linux VM Scale Set resources
* Change controller's Azure disk caching to None
* Associate subnets (in addition to NICs) with security groups
(aesthetic)
* If set, change `worker_priority` from `Low` to `Spot` (action required)
Related:
* https://www.terraform.io/docs/providers/azurerm/guides/2.0-upgrade-guide.html
* Quay has historically generated ACI signatures for images to
facilitate rkt's notions of verification (it allowed authors to
actually sign images, though `--trust-keys-from-https` is in use
since etcd and most authors don't sign images). OCI standardization
didn't adopt verification ideas and checking signatures has fallen
out of favor.
* Fix an issue where Quay no longer seems to be generating ACI
signatures for new images (e.g. quay.io/coreos/etcd:v.3.4.4)
* Don't be alarmed by rkt `--insecure-options=image`. It refers
to disabling image signature checking (i.e. docker pull doesn't
check signatures either)
* System containers for Kubelet and bootstrap have transitioned
to the docker:// transport, so there is precedent and this brings
all the system containers on Container Linux controllers into
alignment
* Configure kube-proxy --metrics-bind-address=0.0.0.0 (default
127.0.0.1) to serve metrics on 0.0.0.0:10249
* Add firewall rules to allow Prometheus (resides on a worker) to
scrape kube-proxy service endpoints on controllers or workers
* Add a clusterIP: None service for kube-proxy endpoint discovery
* Change kubelet.service on Container Linux nodes to ExecStart Kubelet
inline to replace the use of the host OS kubelet-wrapper script
* Express rkt run flags and volume mounts in a clear, uniform way to
make the Kubelet service easier to audit, manage, and understand
* Eliminate reliance on a Container Linux kubelet-wrapper script
* Typhoon for Fedora CoreOS developed a kubelet.service that similarly
uses an inline ExecStart (except with podman instead of rkt) and a
more minimal set of volume mounts. Adopt the volume improvements:
* Change Kubelet /etc/kubernetes volume to read-only
* Change Kubelet /etc/resolv.conf volume to read-only
* Remove unneeded /var/lib/cni volume mount
Background:
* kubelet-wrapper was added in CoreOS around the time of Kubernetes v1.0
to simplify running a CoreOS-built hyperkube ACI image via rkt-fly. The
script defaults are no longer ideal (e.g. rkt's notion of trust dates
back to quay.io ACI image serving and signing, which informed the OCI
standard images we use today, though they still lack rkt's signing ideas).
* Shipping kubelet-wrapper was regretted at CoreOS, but remains in the
distro for compatibility. The script is not updated to track hyperkube
changes, but it is stable and kubelet.env overrides bridge most gaps
* Typhoon Container Linux nodes have used kubelet-wrapper to rkt/rkt-fly
run the Kubelet via the official k8s.gcr.io hyperkube image using overrides
(new image registry, new image format, restart handling, new mounts, new
entrypoint in v1.17).
* Observation: Most of what it takes to run a Kubelet container is defined
in Typhoon, not in kubelet-wrapper. The wrapper's value is now undermined
by having to workaround its dated defaults. Typhoon may be better served
defining Kubelet.service explicitly
* Typhoon for Fedora CoreOS developed a kubelet.service without the use
of a host OS kubelet-wrapper which is both clearer and eliminated some
volume mounts
* Rename Container Linux Config (CLC) files to *.yaml to align
with Fedora CoreOS Config (FCC) files and for syntax highlighting
* Replace common uses of Terraform `element` (which wraps around)
with `list[index]` syntax to surface index errors
* Original tutorials favored including the platform (e.g.
google-cloud) in modules (e.g. google-cloud-yavin). Prefer
naming conventions where each module / cluster has a simple
name (e.g. yavin) since the platform is usually redundant
* Retain the example cluster naming themes per platform
* Allow generated assets (TLS materials, manifests) to be
securely distributed to controller node(s) via file provisioner
(i.e. ssh-agent) as an assets bundle file, rather than relying
on assets being locally rendered to disk in an asset_dir and
then securely distributed
* Change `asset_dir` from required to optional. Left unset,
asset_dir defaults to "" and no assets will be written to
files on the machine that runs terraform apply
* Enhancement: Managed cluster assets are kept only in Terraform
state, which supports different backends (GCS, S3, etcd, etc) and
optional encryption. terraform apply accesses state, runs in-memory,
and distributes sensitive materials to controllers without making
use of local disk (simplifies use in CI systems)
* Enhancement: Improve asset unpack and layout process to position
etcd certificates and control plane certificates more cleanly,
without unneeded secret materials
Details:
* Terraform file provisioner support for distributing directories of
contents (with unknown structure) has been limited to reading from a
local directory, meaning local writes to asset_dir were required.
https://github.com/poseidon/typhoon/issues/585 discusses the problem
and newer or upcoming Terraform features that might help.
* Observation: Terraform provisioner support for single files works
well, but iteration isn't viable. We're also constrained to Terraform
language features on the apply side (no extra plugins, no shelling out)
and CoreOS / Fedora tools on the receive side.
* Take a map representation of the contents that would have been splayed
out in asset_dir and pack/encode them into a single file format devised
for easy unpacking. Use an awk one-liner on the receive side to unpack.
In pratice, this has worked well and its rather nice that a single
assets file is transferred by file provisioner (all or none)
Rel: https://github.com/poseidon/terraform-render-bootstrap/pull/162
* Set small CPU requests on static pods kube-apiserver,
kube-controller-manager, and kube-scheduler to align with
upstream tooling and for edge cases
* Effectively, a practical case for these requests hasn't been
observed. However, a small static pod CPU request may offer
a slight benefit if a controller became overloaded and the
below mechanisms were insufficient
Existing safeguards:
* Control plane nodes are tainted to isolate them from
ordinary workloads. Even dense workloads can only compress
CPU resources on worker nodes.
* Control plane static pods use the highest priority class, so
contention favors control plane pods (over say node-exporter)
and CPU is compressible too.
See: https://github.com/poseidon/terraform-render-bootstrap/pull/161
* Update terraform-render-bootstrap module to adopt the
Terrform v0.12 templatefile function feature to replace
the use of terraform-provider-template's `template_dir`
* Require Terraform v0.12.6+ which adds `for_each`
Background:
* `template_dir` was added to `terraform-provider-template`
to add support for template directory rendering in CoreOS
Tectonic Kubernetes distribution (~2017)
* Terraform v0.12 introduced a native `templatefile` function
and v0.12.6 introduced native `for_each` support (July 2019)
that makes it possible to replace `template_dir` usage
* Change `networking` default from flannel to calico on
Azure and DigitalOcean
* AWS, bare-metal, and Google Cloud continue to default
to Calico (as they have since v1.7.5)
* Typhoon now defaults to using Calico and supporting
NetworkPolicy on all platforms
* Review variables available in Azure kubernetes and workers
modules and sync with documentation
* Fix internal workers module default type to Standard_DS1_v2
* Document worker pools `node_labels` variable to set the
initial node labels for a homogeneous set of workers
* Document `worker_node_labels` convenience variable to
set the initial node labels for default worker nodes
* Fix issue (present since bootkube->bootstrap switch) where
controller asset copy could fail if /etc/kubernetes/manifests
wasn't created in time on platforms using path activation for
the Kubelet (observed on DigitalOcean, also possible on
bare-metal)
* Drop `node-role.kubernetes.io/master` and
`node-role.kubernetes.io/node` node labels
* Kubelet (v1.16) now rejects the node labels used
in the kubectl get nodes ROLES output
* https://github.com/kubernetes/kubernetes/issues/75457
* Rename render module from bootkube to bootstrap. Avoid
confusion with the kubernetes-incubator/bootkube tool since
it is no longer used
* Use the poseidon/terraform-render-bootstrap Terraform module
(formerly poseidon/terraform-render-bootkube)
* https://github.com/poseidon/terraform-render-bootkube/pull/149
* Run a kube-apiserver, kube-scheduler, and kube-controller-manager
static pod on each controller node. Previously, kube-apiserver was
self-hosted as a DaemonSet across controllers and kube-scheduler
and kube-controller-manager were a Deployment (with 2 or
controller_count many replicas).
* Remove bootkube bootstrap and pivot to self-hosted
* Remove pod-checkpointer manifests (no longer needed)
* Change default controller_type to Standard_B2s. A B2s is cheaper
by $17/month and provides 2 vCPU, 4GB RAM (vs 1 vCPU, 3.5GB RAM)
* Change default worker_type to Standard_DS1_v2. F1 was the previous
generation. The DS1_v2 is newer, similar cost, more memory, and still
supports Low Priority mode, if desired
* Add all Azure controllers to the apiserver load balancer
backend address pool
* Previously, kube-apiserver availability relied on the 0th
controller being up. Multi-controller was just providing etcd
data redundancy
* Allow updating terraform-provider-ct to any release
beyond v0.3.2, but below v1.0. This relaxes the prior
constraint that allowed only v0.3.y provider versions
* Run kube-apiserver as a non-root user (nobody). User
no longer needs to bind low number ports.
* On most platforms, the kube-apiserver load balancer listens
on 6443 and fronts controllers with kube-apiserver pods using
port 6443. Google Cloud TCP proxy load balancers cannot listen
on 6443. However, GCP's load balancer can be made to listen on
443, while kube-apiserver uses 6443 across all platforms.
* Azure only allows `eviction_policy` to be set for Low priority VMs.
Supporting Low priority VMs meant when Regular VMs were used, each
`terraform apply` rolled workers, to set eviction_policy to null.
* Terraform v0.12 nullable variables fix the issue and plan does not
produce a diff
* Replace v0.11 bracket type hints with Terraform v0.12 list expressions
* Use expression syntax instead of interpolated strings, where suggested
* Update Azure tutorial and worker pools documentation
* Define Terraform and plugin version requirements in versions.tf
* Require azurerm ~> 1.27 to support Terraform v0.12
* Require ct ~> 0.3.2 to support Terraform v0.12
* This change affects users who use worker pools on AWS, GCP, or
Azure with a Container Linux derivative
* Rename worker pool modules' `count` variable to `worker_count`,
because `count` will be a reserved variable name in Terraform v0.12
* Fix to remove a trailing slash that was erroneously introduced
in the scripting that updated from v1.14.1 to v1.14.2
* Workaround before this fix was to re-run `terraform init`
* Introduce "calico" as a `networking` option on Azure and DigitalOcean
using Calico's new VXLAN support (similar to flannel). Flannel remains
the default on these platforms for now.
* Historically, DigitalOcean and Azure only allowed Flannel as the
CNI provider, since those platforms don't support IPIP traffic that
was previously required for Calico.
* Looking forward, its desireable for Calico to become the default
across Typhoon clusters, since it provides NetworkPolicy and a
consistent experience
* No changes to AWS, GCP, or bare-metal where Calico remains the
default CNI provider. On these platforms, IPIP mode will always
be used, since its available and more performant than vxlan
* Change flannel port from the kernel default 8472 to the
IANA assigned VXLAN port 4789
* Update firewall rules or security groups for VXLAN
* Why now? Calico now offers its own VXLAN backend so
standardizing on the IANA port will simplify config
* https://github.com/coreos/flannel/blob/master/Documentation/backends.md#vxlan
* Add ability to load balance TCP/UDP applications (e.g. NodePort)
* Output the load balancer ID as `loadbalancer_id`
* Output `worker_security_group_name` and `worker_address_prefix`
for extending firewall rules
* Add an `enable_aggregation` variable to enable the kube-apiserver
aggregation layer for adding extension apiservers to clusters
* Aggregation is **disabled** by default. Typhoon recommends you not
enable aggregation. Consider whether less invasive ways to achieve your
goals are possible and whether those goals are well-founded
* Enabling aggregation and extension apiservers increases the attack
surface of a cluster and makes extensions a part of the control plane.
Admins must scrutinize and trust any extension apiserver used.
* Passing a v1.14 CNCF conformance test requires aggregation be enabled.
Having an option for aggregation keeps compliance, but retains the
stricter security posture on default clusters
* Add calico-ipam CRDs and RBAC permissions
* Switch IPAM from host-local to calico-ipam
* `calico-ipam` subnets `ippools` (defaults to pod CIDR) into
`ipamblocks` (defaults to /26, but set to /24 in Typhoon)
* `host-local` subnets the pod CIDR based on the node PodCIDR
field (set via kube-controller-manager as /24's)
* Create a custom default IPv4 IPPool to ensure the block size
is kept at /24 to allow 110 pods per node (Kubernetes default)
* Retaining host-local was slightly preferred, but Calico v3.6
is migrating all usage to calico-ipam. The codepath that skipped
calico-ipam for KDD was removed
* https://docs.projectcalico.org/v3.6/release-notes/
* Resolve in-addr.arpa and ip6.arpa DNS PTR requests for Kubernetes
service IPs and pod IPs
* Previously, CoreDNS was configured to resolve in-addr.arpa PTR
records for service IPs (but not pod IPs)
* Assign pod priorityClassNames to critical cluster and node
components (higher is higher priority) to inform node out-of-resource
eviction order and scheduler preemption and scheduling order
* Priority Admission Controller has been enabled since Typhoon
v1.11.1
* Fix a regression caused by lowering the Kubelet TLS client
certificate to system:nodes group (#100) since dropping
cluster-admin dropped the Kubelet's ability to delete nodes.
* On clouds where workers can scale down (manual terraform apply,
AWS spot termination, Azure low priority deletion), worker shutdown
runs the delete-node.service to remove a node to prevent NotReady
nodes from accumulating
* Allow Kubelets to delete cluster nodes via system:nodes group. Kubelets
acting with system:node and kubelet-delete ClusterRoles is still an
improvement over acting as cluster-admin
* System components that require certificates signed by the cluster
CA can submit a CSR to the apiserver, have an administrator inspect
and approve it, and be issued a certificate
* Configure kube-controller-manager to sign Approved CSR's using the
cluster CA private key
* Admins are responsible for approving or denying CSRs, otherwise,
no certificate is issued. Read the Kubernetes docs carefully and
verify the entity making the request and the authorization level
* https://kubernetes.io/docs/tasks/tls/managing-tls-in-a-cluster
* Use a single admin kubeconfig for initial bootkube bootstrap
and for use by a human admin. Previously, an admin kubeconfig
without a named context was used for bootstrap and direct usage
with KUBECONFIG=path, while one with a named context was used
for `kubectl config use-context` style usage. Confusing.
* Provide the admin kubeconfig via `assets/auth/kubeconfig`,
`assets/auth/CLUSTER-config`, or output `kubeconfig-admin`
* terraform-render-bootkube module deprecated kube_dns_service_ip
output in favor of cluster_dns_service_ip
* Rename k8s_dns_service_ip to cluster_dns_service_ip for
consistency too
* Kubelets can use a lower-privilege TLS client certificate with
Org system:nodes and a binding to the system:node ClusterRole
* Admin kubeconfig's continue to belong to Org system:masters to
provide cluster-admin (available in assets/auth/kubeconfig or as
a Terraform output kubeconfig-admin)
* Remove bare-metal output variable kubeconfig
* Add ServiceAccounts and ClusterRoleBindings for kube-apiserver
and kube-scheduler
* Remove the ClusterRoleBinding for the kube-system default ServiceAccount
* Rename the CA certificate CommonName for consistency with upstream
* Add kube-router for pod networking and NetworkPolicy
as an experiment
* Experiments are not documented or supported in any way,
and may be removed without notice. They have known issues
and aren't enabled without special options.
* Remove bullet about isolating workloads on workers, its
now common practice and new users will assume it
* List advanced features available in each module
* Fix erroneous Kubernetes version listing for Google Cloud
Fedora Atomic
* Calico Felix has been reporting anonymous usage data about the
version and cluster size, which violates Typhoon's privacy policy
where analytics should be opt-in only
* Add a variable enable_reporting (default: false) to allow opting
in to reporting usage data to Calico (or future components)
* Fix issue where Azure defaults to Deallocate eviction policy,
which required manually restarting deallocated workers
* Require terraform-provider-azurerm v1.19+ to support setting
the eviction_policy
* loop sends an initial query to detect infinite forwarding
loops in configured upstream DNS servers and fast exit with
an error (its a fatal misconfiguration on the network that
will otherwise cause resolvers to consume memory/CPU until
crashing, masking the problem)
* https://github.com/coredns/coredns/tree/master/plugin/loop
* loadbalance randomizes the ordering of A, AAAA, and MX records
in responses to provide round-robin load balancing (as usual,
clients may still cache responses though)
* https://github.com/coredns/coredns/tree/master/plugin/loadbalance
* Prefer InternalIP and ExternalIP over the node's hostname,
to match upstream behavior and kubeadm
* Previously, hostname-override was used to set node names
to internal IP's to work around some cloud providers not
resolving hostnames for instances (e.g. DO droplets)
* Updating the `terraform-provider-ct` plugin is known to produce
a `user_data` diff in all pre-existing clusters. Applying the
diff to pre-existing cluster destroys controller nodes
* Ignore changes to controller `user_data`. Once all managed
clusters use a release containing this change, it is possible
to update the `terraform-provider-ct` plugin (worker `user_data`
will still be modified)
* Changing the module `ref` for an existing cluster and
re-applying is still NOT supported (although this PR
would protect controllers from being destroyed)
Dalton Hubble
Suraj Deshmukh
Konstantinos Koukopoulos
Valer Cara
Jordan Pittier