* On cloud platforms, `delete-node.service` tries to delete the
local node (not always possible depending on preemption time)
* Since v1.18.3, kubelet TLS bootstrap generates a kubeconfig
in `/var/lib/kubelet` which should be used with kubectl in
the delete-node oneshot
* Use docker to run the `kubelet.service` container
* Update Kubelet mounts to match Fedora CoreOS
* Remove unused `/etc/ssl/certs` mount (see
https://github.com/poseidon/typhoon/pull/810)
* Remove unused `/usr/share/ca-certificates` mount
* Remove `/etc/resolv.conf` mount, Docker default is ok
* Change `delete-node.service` to use docker instead of rkt
and inline ExecStart, as was done on Fedora CoreOS
* Fix permission denied on shutdown `delete-node`, caused
by the kubeconfig mount changing with the introduction of
node TLS bootstrap
Background
* podmand, rkt, and runc daemonless container process runners
provide advantages over the docker daemon for system containers.
Docker requires workarounds for use in systemd units where the
ExecStart must tail logs so systemd can monitor the daemonized
container. https://github.com/moby/moby/issues/6791
* Why switch then? On Flatcar Linux, podman isn't shipped. rkt
works, but isn't developing while container standards continue
to move forward. Typhoon has used runc for the Kubelet runner
before in Fedora Atomic, but its more low-level. So we're left
with Docker, which is less than ideal, but shipped in Flatcar
* Flatcar Linux appears to be shifting system components to
use docker, which does provide some limited guards against
breakages (e.g. Flatcar cannot enable docker live restore)
* Originally, poseidon/terraform-render-bootstrap generated
TLS certificates, manifests, and cluster "assets" written
to local disk (`asset_dir`) during terraform apply cluster
bootstrap
* Typhoon v1.17.0 introduced bootstrapping using only Terraform
state to store cluster assets, to avoid ever writing sensitive
materials to disk and improve automated use-cases. `asset_dir`
was changed to optional and defaulted to "" (no writes)
* Typhoon v1.18.0 deprecated the `asset_dir` variable, removed
docs, and announced it would be deleted in future.
* Add Terraform output `assets_dir` map
* Remove the `asset_dir` variable
Cluster assets are now stored in Terraform state only. For those
who wish to write those assets to local files, this is possible
doing so explicitly.
```
resource local_file "assets" {
for_each = module.yavin.assets_dist
filename = "some-assets/${each.key}"
content = each.value
}
```
Related:
* https://github.com/poseidon/typhoon/pull/595
* https://github.com/poseidon/typhoon/pull/678
* CoreOS Container Linux was deprecated in v1.18.3 (May 2020)
in favor of Fedora CoreOS and Flatcar Linux. CoreOS Container
Linux references were kept to give folks more time to migrate,
but AMIs have now been deleted. Time is up.
Rel: https://coreos.com/os/eol/
* seccomp graduated to GA in Kubernetes v1.19. Support for
seccomp alpha annotations will be removed in v1.22
* Replace seccomp annotations with the GA seccompProfile
field in the PodTemplate securityContext
* Switch profile from `docker/default` to `runtime/default`
(no effective change, since docker is the runtime)
* Verify with docker inspect SecurityOpt. Without the profile,
you'd see `seccomp=unconfined`
Related: https://github.com/poseidon/terraform-render-bootstrap/pull/215
* Fix race condition for bootstrap-secrets SELinux context on non-bootstrap controllers in multi-controller FCOS clusters
* On first boot from disk on non-bootstrap controllers, adding bootstrap-secrets races with kubelet.service starting, which can cause the secrets assets to have the wrong label until kubelet.service restarts (service, reboot, auto-update)
* This can manifest as `kube-apiserver`, `kube-controller-manager`, and `kube-scheduler` pods crashlooping on spare controllers on first cluster creation
* Fedora CoreOS now ships systemd-udev's `default.link` while
Flannel relies on being able to pick its own MAC address for
the `flannel.1` link for tunneled traffic to reach cni0 on
the destination side, without being dropped
* This change first appeared in FCOS testing-devel 32.20200624.20.1
and is the behavior going forward in FCOS since it was added
to align FCOS network naming / configs with the rest of Fedora
and address issues related to the default being missing
* Flatcar Linux (and Container Linux) has a specific flannel.link
configuration builtin, so it was not affected
* https://github.com/coreos/fedora-coreos-tracker/issues/574#issuecomment-665487296
Note: Typhoon's recommended and default CNI provider is Calico,
unless `networking` is set to flannel directly.
* Set Kubelet cgroup driver to systemd when Flatcar Linux edge
is chosen
Note: Typhoon module status assumes use of the stable variant of
an OS channel/stream. Its possible to use earlier variants and
those are sometimes tested or developed against, but stable is
the recommendation
* Accept experimental CNI `networking` mode "cilium"
* Run Cilium v1.8.0-rc4 with overlay vxlan tunnels and a
minimal set of features. We're interested in:
* IPAM: Divide pod_cidr into /24 subnets per node
* CNI networking pod-to-pod, pod-to-external
* BPF masquerade
* NetworkPolicy as defined by Kubernetes (no L7 Policy)
* Continue using kube-proxy with Cilium probe mode
* Firewall changes:
* Require UDP 8472 for vxlan (Linux kernel default) between nodes
* Optional ICMP echo(8) between nodes for host reachability
(health)
* Optional TCP 4240 between nodes for endpoint reachability (health)
Known Issues:
* Containers with `hostPort` don't listen on all host addresses,
these workloads must use `hostNetwork` for now
https://github.com/cilium/cilium/issues/12116
* Erroneous warning on Fedora CoreOS
https://github.com/cilium/cilium/issues/10256
Note: This is experimental. It is not listed in docs and may be
changed or removed without a deprecation notice
Related:
* https://github.com/poseidon/terraform-render-bootstrap/pull/192
* https://github.com/cilium/cilium/issues/12217
* Change the Calico VXLAN interface for MTU from 1450 to 1410
* VXLAN on Azure should support MTU 1450. However, there is
history where performance measures have shown that 1410 is
needed to have expected performance. Flatcar Linux has the
same MTU 1410 override and note
* FCOS 31.20200323.3.2 was known to perform fine with 1450, but
now in 31.20200517.3.0 the right value seems to be 1410
* Remove node label `node.kubernetes.io/master` from controller nodes
* Use `node.kubernetes.io/controller` (present since v1.9.5,
[#160](https://github.com/poseidon/typhoon/pull/160)) to node select controllers
* Rename controller NoSchedule taint from `node-role.kubernetes.io/master` to
`node-role.kubernetes.io/controller`
* Tolerate the new taint name for workloads that may run on controller nodes
and stop tolerating `node-role.kubernetes.io/master` taint
* Kubelet `--lock-file` and `--exit-on-lock-contention` date
back to usage of bootkube and at one point running Kubelet
in a "self-hosted" style whereby an on-host Kubelet (rkt)
started pods, but then a Kubelet DaemonSet was scheduled
and able to take over (hence self-hosted). `lock-file` and
`exit-on-lock-contention` flags supported this pivot. The
pattern has been out of favor (in bootkube too) for years
because of dueling Kubelet complexity
* Typhoon runs Kubelet as a container via an on-host systemd
unit using podman (Fedora CoreOS) or rkt (Flatcar Linux). In
fact, Typhoon no longer uses bootkube or control plane pivot
(let alone Kubelet pivot) and uses static pods since v1.16.0
* https://github.com/poseidon/typhoon/pull/536
* Generated Kubelet TLS certificate and key are not longer
used or distributed to machines since Kubelet TLS bootstrap
is used instead. Remove the certificate and key from state
* Enable terraform-provider-ct `strict` mode for parsing
Container Linux Configs and snippets
* Fix Container Linux Config systemd unit syntax `enable`
(old) to `enabled`
* Align with Fedora CoreOS which uses strict mode already
* Build Kubelet container images internally and publish
to Quay and Dockerhub (new) as an alternative in case of
registry outage or breach
* Use our infra to provide single and multi-arch (default)
Kublet images for possible future use
* Docs: Show how to use alternative Kubelet images via
snippets and a systemd dropin (builds on #737)
Changes:
* Update docs with changes to Kubelet image building
* If you prefer to trust images built by Quay/Dockerhub,
automated image builds are still available with unique
tags (albeit with some limitations):
* Quay automated builds are tagged `build-{short_sha}`
(limit: only amd64)
* Dockerhub automated builts are tagged `build-{tag}`
and `build-master` (limit: only amd64, no shas)
Links:
* Kubelet: https://github.com/poseidon/kubelet
* Docs: https://typhoon.psdn.io/topics/security/#container-images
* Registries:
* quay.io/poseidon/kubelet
* docker.io/psdn/kubelet
* Write the systemd kubelet.service to use `KUBELET_IMAGE`
as the Kubelet. This provides a nice way to use systemd
dropins to temporarily override the image (e.g. during a
registry outage)
Note: Only Typhoon Kubelet images and registries are supported.
* Set a consistent MCS level/range for Calico install-cni
* Note: Rebooting a node was a workaround, because Kubelet
relabels /etc/kubernetes(/cni/net.d)
Background:
* On SELinux enforcing systems, the Calico CNI install-cni
container ran with default SELinux context and a random MCS
pair. install-cni places CNI configs by first creating a
temporary file and then moving them into place, which means
the file MCS categories depend on the containers SELinux
context.
* calico-node Pod restarts creates a new install-cni container
with a different MCS pair that cannot access the earlier
written file (it places configs every time), causing the
init container to error and calico-node to crash loop
* https://github.com/projectcalico/cni-plugin/issues/874
```
mv: inter-device move failed: '/calico.conf.tmp' to
'/host/etc/cni/net.d/10-calico.conflist'; unable to remove target:
Permission denied
Failed to mv files. This may be caused by selinux configuration on
the
host, or something else.
```
Note, this isn't a host SELinux configuration issue.
Related:
* https://github.com/poseidon/terraform-render-bootstrap/pull/186
* Enable bootstrap token authentication on kube-apiserver
* Generate the bootstrap.kubernetes.io/token Secret that
may be used as a bootstrap token
* Generate a bootstrap kubeconfig (with a bootstrap token)
to be securely distributed to nodes. Each Kubelet will use
the bootstrap kubeconfig to authenticate to kube-apiserver
as `system:bootstrappers` and send a node-unique CSR for
kube-controller-manager to automatically approve to issue
a Kubelet certificate and kubeconfig (expires in 72 hours)
* Add ClusterRoleBinding for bootstrap token subjects
(`system:bootstrappers`) to have the `system:node-bootstrapper`
ClusterRole
* Add ClusterRoleBinding for bootstrap token subjects
(`system:bootstrappers`) to have the csr nodeclient ClusterRole
* Add ClusterRoleBinding for bootstrap token subjects
(`system:bootstrappers`) to have the csr selfnodeclient ClusterRole
* Enable NodeRestriction admission controller to limit the
scope of Node or Pod objects a Kubelet can modify to those of
the node itself
* Ability for a Kubelet to delete its Node object is retained
as preemptible nodes or those in auto-scaling instance groups
need to be able to remove themselves on shutdown. This need
continues to have precedence over any risk of a node deleting
itself maliciously
Security notes:
1. Issued Kubelet certificates authenticate as user `system:node:NAME`
and group `system:nodes` and are limited in their authorization
to perform API operations by Node authorization and NodeRestriction
admission. Previously, a Kubelet's authorization was broader. This
is the primary security motivation.
2. The bootstrap kubeconfig credential has the same sensitivity
as the previous generated TLS client-certificate kubeconfig.
It must be distributed securely to nodes. Its compromise still
allows an attacker to obtain a Kubelet kubeconfig
3. Bootstrapping Kubelet kubeconfig's with a limited lifetime offers
a slight security improvement.
* An attacker who obtains the kubeconfig can likely obtain the
bootstrap kubeconfig as well, to obtain the ability to renew
their access
* A compromised bootstrap kubeconfig could plausibly be handled
by replacing the bootstrap token Secret, distributing the token
to new nodes, and expiration. Whereas a compromised TLS-client
certificate kubeconfig can't be revoked (no CRL). However,
replacing a bootstrap token can be impractical in real cluster
environments, so the limited lifetime is mostly a theoretical
benefit.
* Cluster CSR objects are visible via kubectl which is nice
4. Bootstrapping node-unique Kubelet kubeconfigs means Kubelet
clients have more identity information, which can improve the
utility of audits and future features
Rel: https://kubernetes.io/docs/reference/command-line-tools-reference/kubelet-tls-bootstrapping/
Rel: https://github.com/poseidon/terraform-render-bootstrap/pull/185
Dalton Hubble
Bo Huang