* When using the Cilium component, disable bootstrapping the
kube-proxy DaemonSet. Instead, configure Cilium to provide its
kube-proxy replacement with BPF
* Update the self-managed Cilium component to use kube-proxy
replacement as well
* Use EC2 resource-based hostnames instead of IP-based hostnames. The Amazon
DNS server can resolve A and AAAA queries to IPv4 and IPv6 node addresses
* For example, nodes used to be named like `ip-10-11-12-13.us-east-1.compute.internal`
but going forward use the instance id `i-0123456789abcdef.us-east-1.compute.internal`
* Tag controller node EBS volumes with a name based on the controller node name
* Set reasonable values and remove some variable clutter
* enable_reporting is only used with Calico and we can just default
to false, I doubt anyone uses Calico and cares much about reporting
metrics to upstream Calico
* Typhoon now supports arbitrary combinations of controller, worker,
and worker pool architectures so we can drop the specific details of
full-cluster vs hybrid cluster. Just pick the architecture for each
group of nodes accordingly.
* However, if a custom node taint is set, continue to configure the
cluster's daemonsets accordingly with `daemonset_tolerations`
* Drop support for `cluster_domain_suffix` customization and
always use `cluster.local`. Many components in the Kubernetes
ecosystem assume this default suffix and its very rare to be
setting a special value here these days
* Cleanup a few variables that are seldom used
* On platforms that support ARM64 instances, configure controller
and worker node host architectures separately
* For example, you can run arm64 controllers and amd64 workers
* Add `controller_arch` and `worker_arch` variables
* Remove `arch` variable
* Add `controller_disk_type`, `controller_disk_size`, and `controller_disk_iops`
variables
* Add `worker_disk_type`, `worker_disk_size`, and `worker_disk_iops` variables
and fix propagation to worker nodes
* Remove `disk_type`, `disk_size`, and `disk_iops` variables
* Add `controller_cpu_credits` and `worker_cpu_credits` variables to set CPU
pricing mode for burstable instance types
* Use flexible orchestration mode. Azure has started to recommend this
mode because it allows interacting with VMSS instances like regular VMs
via the CLI or via the Azure Portal
* Add options to allow workers nodes to use ephemeral local disks
* Add `controller_disk_type` and `controller_disk_size` variables
* Add `worker_disk_type`, `worker_disk_size`, and `worker_ephemeral_disk` variables
* Consolidate load balancer frontend IPs to just the minimal IPv4
and IPv6 addresses that are needed per load balancer. apiserver and
ingress use separate ports, so there is not a true need for a separate
public IPv4 address just for apiserver
* Some might prefer a separate IP just because it slightly hides the
apiserver, but these are public hosted endpoints that can be discovered
* Reduce the cost of an Azure cluster since IPv4 public IPs are billed
($3.60/mo/cluster)
* Rename the region variable to location to align with Azure
platform conventions, where resources are created within an
Azure location, which are themselves part of broader geographical
regions
* Define a dual-stack virtual network with both IPv4 and IPv6 private
address space. Change `host_cidr` variable (string) to a `network_cidr`
variable (object) with "ipv4" and "ipv6" fields that list CIDR strings.
* Define dual-stack controller and worker subnets. Disable Azure
default outbound access (a deprecated fallback mechanism)
* Enable dual-stack load balancing to Kubernetes Ingress by adding
a public IPv6 frontend IP and LB rule to the load balancer.
* Enable worker outbound IPv6 connectivity through load balancer
SNAT by adding an IPv6 frontend IP and outbound rule
* Configure controller nodes with a public IPv6 address to provide
direct outbound IPv6 connectivity
* Add an IPv6 worker backend pool. Azure requires separate IPv4 and
IPv6 backend pools, though the health probe can be shared
* Extend network security group rules for IPv6 source/destinations
Checklist:
Access to controller and worker nodes via IPv6 addresses:
* SSH access to controller nodes via public IPv6 address
* SSH access to worker nodes via (private) IPv6 address (via
controller)
Outbound IPv6 connectivity from controller and worker nodes:
```
nc -6 -zv ipv6.google.com 80
Ncat: Version 7.94 ( https://nmap.org/ncat )
Ncat: Connected to [2607:f8b0:4001:c16::66]:80.
Ncat: 0 bytes sent, 0 bytes received in 0.02 seconds.
```
Serve Ingress traffic via IPv4 or IPv6 just requires setting
up A and AAAA records and running the ingress controller with
`hostNetwork: true` since, hostPort only forwards IPv4 traffic
* Previously: Typhoon provisions clusters with kube-system components
like CoreDNS, kube-proxy, and a chosen CNI provider (among flannel,
Calico, or Cilium) pre-installed. This is convenient since clusters
come with "batteries included". But it also means upgrading these
components is generally done in lock-step, by upgrading to a new
Typhoon / Kubernetes release
* It can be valuable to manage these components with a separate
plan/apply process or through automations and deploy systems. For
example, this allows managing CoreDNS separately from the cluster's
lifecycle.
* These "components" will continue to be pre-installed by default,
but a new `components` variable allows them to be disabled and
managed as "addons", components you apply after cluster creation
and manage on a rolling basis. For some of these, we may provide
Terraform modules to aide in managing these components.
```
module "cluster" {
# defaults
components = {
enable = true
coredns = {
enable = true
}
kube_proxy = {
enable = true
}
# Only the CNI set in var.networking will be installed
flannel = {
enable = true
}
calico = {
enable = true
}
cilium = {
enable = true
}
}
}
```
An earlier variable `install_container_networking = true/false` has
been removed, since it can now be achieved with this more extensible
and general components mechanism by setting the chosen networking
provider enable field to false.
* Output the network security group name and address prefixes
for controller nodes, to allow adding custom network security
rules that apply specifically to controller nodes
* Add firewall or security riles to allow node-to-node traffic
on ports 9962-9965 for Cilium and Hubble metrics. Cilium runs
with host network, so these require cloud firewall changes
* Allow for more minimal base cluster setups, that manage CoreDNS or
kube-proxy as applications, with rolling updates, or deploy systems.
Or in the case of kube-proxy, its becoming more common to not install
it and instead use Cilium
* Add a `components` pass-through variable to configure pre-installed
components like kube-proxy and CoreDNS. These components can be
disabled (individually or together) to allow for managing components
with separate plan/apply processes or automations
* terraform-render-bootstrap manifest assets are now structured as
manifests/{coredns,kube-proxy,network} so adapt the controller
layout scripts accordingly
* This is similar to some changes in v1.29.2 that allowed for the
container networking provider manifests to be skipped
Related: https://github.com/poseidon/typhoon/pull/1419, https://github.com/poseidon/typhoon/pull/1421
* When `true`, the chosen container `networking` provider is installed during cluster bootstrap
* Set `false` to self-manage the container networking provider. This allows flannel, Calico, or Cilium
to be managed via Terraform (like any other Kubernetes resources). Nodes will be NotReady until you
apply the self-managed container networking provider. This may become the default in future.
* Set CNI networking to "none" to skip installing any CNI provider
(i.e. no flannel, Calico, or Cilium). In this mode, cluster nodes
will be NotReady until you add your own CNI stack
* Motivation: I now tend to manage CNI components as addon modules
just like other applications overlaid onto a cluster. It allows for
faster iteration and may eventually become the recommendation
* Allow upgrading to the v5.x Google Cloud Terrform Provider
* Relax the version constraint to ease future compatibility,
though it does allow users to upgrade prematurely
* With Cilium v1.14, Cilium's kube-proxy partial mode changed to
either be enabled or disabled (not partial). This somtimes leaves
Cilium (and the host) unable to reach the kube-apiserver via the
in-cluster Kubernetes Service IP, until the host is rebooted
* As a workaround, configure Cilium to rely on external DNS resolvers
to find the IP address of the apiserver. This is less portable
and less "clean" than using in-cluster discovery, but also what
Cilium wants users to do. Revert this when the upstream issue
https://github.com/cilium/cilium/issues/27982 is resolved
* Allow passing a dummy RSA key to Azure to satisfy its obtuse
requirements (recommend deleting the corresponding private key)
* Then `ssh_authorized_key` can be used to provide Fedora CoreOS
or Flatcar Linux with a modern ed25519 public key to set in the
authorized_keys via Ignition
