* Drop `node-role.kubernetes.io/master` and
`node-role.kubernetes.io/node` node labels
* Kubelet (v1.16) now rejects the node labels used
in the kubectl get nodes ROLES output
* https://github.com/kubernetes/kubernetes/issues/75457
* Rename render module from bootkube to bootstrap. Avoid
confusion with the kubernetes-incubator/bootkube tool since
it is no longer used
* Use the poseidon/terraform-render-bootstrap Terraform module
(formerly poseidon/terraform-render-bootkube)
* https://github.com/poseidon/terraform-render-bootkube/pull/149
* Run a kube-apiserver, kube-scheduler, and kube-controller-manager
static pod on each controller node. Previously, kube-apiserver was
self-hosted as a DaemonSet across controllers and kube-scheduler
and kube-controller-manager were a Deployment (with 2 or
controller_count many replicas).
* Remove bootkube bootstrap and pivot to self-hosted
* Remove pod-checkpointer manifests (no longer needed)
* Intended as part of #504 improvement
* Single controller clusters only require one controller
instance group (previously created zone-many)
* Multi-controller clusters must "wrap" controllers over
zonal heterogeneous instance groups. For example, 5
controllers over 3 zones (no change)
* Allow updating terraform-provider-ct to any release
beyond v0.3.2, but below v1.0. This relaxes the prior
constraint that allowed only v0.3.y provider versions
* Run kube-apiserver as a non-root user (nobody). User
no longer needs to bind low number ports.
* On most platforms, the kube-apiserver load balancer listens
on 6443 and fronts controllers with kube-apiserver pods using
port 6443. Google Cloud TCP proxy load balancers cannot listen
on 6443. However, GCP's load balancer can be made to listen on
443, while kube-apiserver uses 6443 across all platforms.
* Fix a GCP errata item https://github.com/poseidon/typhoon/wiki/Errata
* Removal of a Google Cloud cluster often required 2 runs of
`terraform apply` because network resource deletes timeout
after 4m. Raise the network deletion timeout to 6m to
ensure apply only needs to be run once to remove a cluster
* google_compute_backend_services use nested blocks to define
backends (instance groups heterogeneous controllers)
* Use Terraform v0.12.x dynamic blocks so the apiserver backend
service can refer to (up to zone-many) controller instance groups
* Previously, with Terraform v0.11.x, the apiserver backend service
had to list a fixed set of backends to span controller nodes across
zones in multi-controller setups. 3 backends were used because each
GCP region offered at least 3 zones. Single-controller clusters had
the cosmetic ugliness of unused instance groups
* Allow controllers to span more than 3 zones if avilable in a
region (e.g. currently only us-central1, with 4 zones)
Related:
* https://www.terraform.io/docs/providers/google/r/compute_backend_service.html
* https://www.terraform.io/docs/configuration/expressions.html#dynamic-blocks
* Replace v0.11 bracket type hints with Terraform v0.12 list expressions
* Use expression syntax instead of interpolated strings, where suggested
* Update Google Cloud tutorial and worker pools documentation
* Define Terraform and plugin version requirements in versions.tf
* Require google ~> 2.5 to support Terraform v0.12
* Require ct ~> 0.3.2 to support Terraform v0.12
* This change affects users who use worker pools on AWS, GCP, or
Azure with a Container Linux derivative
* Rename worker pool modules' `count` variable to `worker_count`,
because `count` will be a reserved variable name in Terraform v0.12
* Fix to remove a trailing slash that was erroneously introduced
in the scripting that updated from v1.14.1 to v1.14.2
* Workaround before this fix was to re-run `terraform init`
* Change flannel port from the kernel default 8472 to the
IANA assigned VXLAN port 4789
* Update firewall rules or security groups for VXLAN
* Why now? Calico now offers its own VXLAN backend so
standardizing on the IANA port will simplify config
* https://github.com/coreos/flannel/blob/master/Documentation/backends.md#vxlan
If no region is set at the Google provider level, Terraform fails to
create the google_compute_target_pool.workers resource and complains
with "Cannot determine region: set in this resource, or set provider-level 'region' or 'zone'."
This commit fixes the issue by explicitly setting the region for the
google_compute_target_pool.workers resource.
* Add an `enable_aggregation` variable to enable the kube-apiserver
aggregation layer for adding extension apiservers to clusters
* Aggregation is **disabled** by default. Typhoon recommends you not
enable aggregation. Consider whether less invasive ways to achieve your
goals are possible and whether those goals are well-founded
* Enabling aggregation and extension apiservers increases the attack
surface of a cluster and makes extensions a part of the control plane.
Admins must scrutinize and trust any extension apiserver used.
* Passing a v1.14 CNCF conformance test requires aggregation be enabled.
Having an option for aggregation keeps compliance, but retains the
stricter security posture on default clusters
* Background: A managed instance group of workers is used in backend
services for global load balancing (HTTP/HTTPS Ingress) and output
for custom global load balancing use cases
* Add worker instances to a target pool load balancing TCP/UDP
applications (NodePort or proxied). Output as `worker_target_pool`
* Health check for workers with a healthy Ingress controller. Forward
rules (regional) to target pools don't support different external and
internal ports so choosing nodes with Ingress allows proxying as a
workaround
* A target pool is a logical grouping only. It doesn't add costs to
clusters or worker pools
* Add calico-ipam CRDs and RBAC permissions
* Switch IPAM from host-local to calico-ipam
* `calico-ipam` subnets `ippools` (defaults to pod CIDR) into
`ipamblocks` (defaults to /26, but set to /24 in Typhoon)
* `host-local` subnets the pod CIDR based on the node PodCIDR
field (set via kube-controller-manager as /24's)
* Create a custom default IPv4 IPPool to ensure the block size
is kept at /24 to allow 110 pods per node (Kubernetes default)
* Retaining host-local was slightly preferred, but Calico v3.6
is migrating all usage to calico-ipam. The codepath that skipped
calico-ipam for KDD was removed
* https://docs.projectcalico.org/v3.6/release-notes/
* Resolve in-addr.arpa and ip6.arpa DNS PTR requests for Kubernetes
service IPs and pod IPs
* Previously, CoreDNS was configured to resolve in-addr.arpa PTR
records for service IPs (but not pod IPs)
* Support terraform-provider-google v1.19.0, v1.19.1, v1.20.0
and v2.0+ (and allow for future 2.x.y releases)
* Require terraform-provider-google v1.19.0 or newer. v1.19.0
introduced `network_interface` fields `network_ip` and `nat_ip`
to deprecate `address` and `assigned_nat_ip`. Those deprecated
fields are removed in terraform-provider-google v2.0
* https://github.com/terraform-providers/terraform-provider-google/releases/tag/v2.0.0
* Assign pod priorityClassNames to critical cluster and node
components (higher is higher priority) to inform node out-of-resource
eviction order and scheduler preemption and scheduling order
* Priority Admission Controller has been enabled since Typhoon
v1.11.1
* Intel Haswell or better is available in every zone around the world
* Neither Kubernetes nor Typhoon have a particular minimum processor
family. However, a few Google Cloud zones still default to Sandy/Ivy
bridge (scheduled to shift April 2019). Price is only based on machine
type so it is beneficial to opt for the next processor family
* Intel Haswell is a suitable minimum since it still allows plenty of
liberty in choosing any region or machine type
* Likely a slight increase to preemption probability in a few zones,
but any lower probability on Sandy/Ivy bridge is due to lower
desirability as they're phased out
* https://cloud.google.com/compute/docs/regions-zones/
* Fix a regression caused by lowering the Kubelet TLS client
certificate to system:nodes group (#100) since dropping
cluster-admin dropped the Kubelet's ability to delete nodes.
* On clouds where workers can scale down (manual terraform apply,
AWS spot termination, Azure low priority deletion), worker shutdown
runs the delete-node.service to remove a node to prevent NotReady
nodes from accumulating
* Allow Kubelets to delete cluster nodes via system:nodes group. Kubelets
acting with system:node and kubelet-delete ClusterRoles is still an
improvement over acting as cluster-admin
* System components that require certificates signed by the cluster
CA can submit a CSR to the apiserver, have an administrator inspect
and approve it, and be issued a certificate
* Configure kube-controller-manager to sign Approved CSR's using the
cluster CA private key
* Admins are responsible for approving or denying CSRs, otherwise,
no certificate is issued. Read the Kubernetes docs carefully and
verify the entity making the request and the authorization level
* https://kubernetes.io/docs/tasks/tls/managing-tls-in-a-cluster
* Use a single admin kubeconfig for initial bootkube bootstrap
and for use by a human admin. Previously, an admin kubeconfig
without a named context was used for bootstrap and direct usage
with KUBECONFIG=path, while one with a named context was used
for `kubectl config use-context` style usage. Confusing.
* Provide the admin kubeconfig via `assets/auth/kubeconfig`,
`assets/auth/CLUSTER-config`, or output `kubeconfig-admin`
* terraform-render-bootkube module deprecated kube_dns_service_ip
output in favor of cluster_dns_service_ip
* Rename k8s_dns_service_ip to cluster_dns_service_ip for
consistency too
* Kubelets can use a lower-privilege TLS client certificate with
Org system:nodes and a binding to the system:node ClusterRole
* Admin kubeconfig's continue to belong to Org system:masters to
provide cluster-admin (available in assets/auth/kubeconfig or as
a Terraform output kubeconfig-admin)
* Remove bare-metal output variable kubeconfig
* Add ServiceAccounts and ClusterRoleBindings for kube-apiserver
and kube-scheduler
* Remove the ClusterRoleBinding for the kube-system default ServiceAccount
* Rename the CA certificate CommonName for consistency with upstream
* On GCP, kubectl port-forward connections to pods are closed
after a timeout (unlike AWS NLB's or Azure load balancers)
* Increase the GCP apiserver backend service timeout from 1 minute
to 5 minutes to be more similar to AWS/Azure LB behavior
* Add kube-router for pod networking and NetworkPolicy
as an experiment
* Experiments are not documented or supported in any way,
and may be removed without notice. They have known issues
and aren't enabled without special options.
* Remove bullet about isolating workloads on workers, its
now common practice and new users will assume it
* List advanced features available in each module
* Fix erroneous Kubernetes version listing for Google Cloud
Fedora Atomic
* Calico Felix has been reporting anonymous usage data about the
version and cluster size, which violates Typhoon's privacy policy
where analytics should be opt-in only
* Add a variable enable_reporting (default: false) to allow opting
in to reporting usage data to Calico (or future components)
* loop sends an initial query to detect infinite forwarding
loops in configured upstream DNS servers and fast exit with
an error (its a fatal misconfiguration on the network that
will otherwise cause resolvers to consume memory/CPU until
crashing, masking the problem)
* https://github.com/coredns/coredns/tree/master/plugin/loop
* loadbalance randomizes the ordering of A, AAAA, and MX records
in responses to provide round-robin load balancing (as usual,
clients may still cache responses though)
* https://github.com/coredns/coredns/tree/master/plugin/loadbalance
* Prefer InternalIP and ExternalIP over the node's hostname,
to match upstream behavior and kubeadm
* Previously, hostname-override was used to set node names
to internal IP's to work around some cloud providers not
resolving hostnames for instances (e.g. DO droplets)
* Updating the `terraform-provider-ct` plugin is known to produce
a `user_data` diff in all pre-existing clusters. Applying the
diff to pre-existing cluster destroys controller nodes
* Ignore changes to controller `user_data`. Once all managed
clusters use a release containing this change, it is possible
to update the `terraform-provider-ct` plugin (worker `user_data`
will still be modified)
* Changing the module `ref` for an existing cluster and
re-applying is still NOT supported (although this PR
would protect controllers from being destroyed)
* Allowing serving IPv6 applications via Kubernetes Ingress
on Typhoon Google Cloud clusters
* Add `ingress_static_ipv6` output variable for use in AAAA
DNS records
* Run at least two replicas of CoreDNS to better support
rolling updates (previously, kube-dns had a pod nanny)
* On multi-master clusters, set the CoreDNS replica count
to match the number of masters (e.g. a 3-master cluster
previously used replicas:1, now replicas:3)
* Add AntiAffinity preferred rule to favor distributing
CoreDNS pods across controller nodes nodes
* Continue to ensure scheduler and controller-manager run
at least two replicas to support performing kubectl edits
on single-master clusters (no change)
* For multi-master clusters, set scheduler / controller-manager
replica count to the number of masters (e.g. a 3-master cluster
previously used replicas:2, now replicas:3)
* Add new bird and felix readiness checks
* Read MTU from ConfigMap veth_mtu
* Add RBAC read for serviceaccounts
* Remove invalid description from CRDs
* Broaden internal-etcd firewall rule to allow etcd client
traffic (2379) from other controller nodes
* Previously, kube-apiservers were only able to connect to their
node's local etcd peer. While master node outages were tolerated,
reaching a healthy peer took longer than neccessary in some cases
* Reduce time needed to bootstrap a cluster
* Release v1.11.1 erroneously left Fedora Atomic clusters using
the v1.11.0 Kubelet. The rest of the control plane ran v1.11.1
as expected
* Update Kubelet from v1.11.0 to v1.11.1 so Fedora Atomic matches
Container Linux
* Container Linux modules were not affected
* Switch Ingress from regional network load balancers to global
HTTP/TCP Proxy load balancing
* Reduce cost by ~$19/month per cluster. Google bills the first 5
global and regional forwarding rules separately. Typhoon clusters now
use 3 global and 0 regional forwarding rules.
* Worker pools no longer include an extraneous load balancer. Remove
worker module's `ingress_static_ip` output.
* Add `ingress_static_ipv4` output variable
* Add `worker_instance_group` output to allow custom global load
balancing
* Deprecate `controllers_ipv4_public` module output
* Deprecate `ingress_static_ip` module output. Use `ingress_static_ipv4`
* Adjust firewall rules, security groups, cloud load balancers,
and generated kubeconfig's
* Facilitates some future simplifications and cost reductions
* Bare-Metal users who exposed kube-apiserver on a WAN via their
router or load balancer will need to adjust its configuration.
This is uncommon, most apiserver are on LAN and/or behind VPN
so no routing infrastructure is configured with the port number
* Use Kubelet bearer token authn/authz to scrape metrics
* Drop RBAC permission from nodes/proxy to nodes/metrics
* Stop proxying kubelet scrapes through the apiserver, since
this required higher privilege (nodes/proxy) and can add
load to the apiserver on large clusters
* Raise minimum Terraform version to v0.11.0
* Terraform v0.11.x has been supported since Typhoon v1.9.2
and Terraform v0.10.x was last released in Nov 2017. I'd like
to stop worrying about v0.10.x and remove migration docs as
a later followup
* Migration docs docs/topics/maintenance.md#terraform-v011x
* Observed frequent kube-scheduler and controller-manager
restarts with Calico as the CNI provider. Root cause was
unclear since control plane was functional and tests of
pod to pod network connectivity passed
* Root cause: Calico sets up cali* and tunl* network interfaces
for containers on hosts. NetworkManager tries to manage these
interfaces. It periodically disconnected veth pairs. Logs did
not surface this issue since its not an error per-se, just Calico
and NetworkManager dueling for control. Kubernetes correctly
restarted pods failing health checks and ensured 2 replicas were
running so the control plane functioned mostly normally. Pod to
pod connecitivity was only affected occassionally. Pain to debug.
* Solution: Configure NetworkManager to ignore the Calico ifaces
per Calico's recommendation. Cloud-init writes files after
NetworkManager starts, so a restart is required on first boot. On
subsequent boots, the file is present so no restart is needed
* (containerized) kube-proxy warns that it is unable to
load the ip_vs kernel module despite having the correct
mounts. Atomic uses an xz compressed module and modprobe
in the container was not compiled with compression support
* Workaround issue for now by always loading ip_vs on-host
* https://github.com/kubernetes/kubernetes/issues/60
* Use the upstream bootkube image packaged with the
required metadata to be usable as a system container
under systemd
* Run bootkube with runc so no host level components
use Docker any more. Docker is still the runtime
* Remove bootkube script and old systemd unit
* Change kubelet system image to use --cgroups-per-qos=true
(default) instead of false
* Change kubelet system image to use --enforce-node-allocatable=pods
instead of an empty string
* Fix kubelet port-forward on Google Cloud / Fedora Atomic
* Mount the host's /etc/hosts in kubelet system containers
* Problem: kubelet runc system containers on Atomic were not
mounting the host's /etc/hosts, like rkt-fly does on Container
Linux. `kubectl port-forward` calls socat with localhost. DNS
servers on AWS, DO, and in many bare-metal environments resolve
localhost to the caller as a convenience. Google Cloud notably
does not nor is it required to do so and this surfaced the
missing /etc/hosts in runc kubelet namespaces.
* Allow multi-controller clusters on Google Cloud
* GCP regional network load balancers have a long open
bug in which requests originating from a backend instance
are routed to the instance itself, regardless of whether
the health check passes or not. As a result, only the 0th
controller node registers. We've recommended just using
single master GCP clusters for a while
* https://issuetracker.google.com/issues/67366622
* Workaround issue by switching to a GCP TCP Proxy load
balancer. TCP proxy lb routes traffic to a backend service
(global) of instance group backends. In our case, spread
controllers across 3 zones (all regions have 3+ zones) and
organize them in 3 zonal unmanaged instance groups that
serve as backends. Allows multi-controller cluster creation
* GCP network load balancers only allowed legacy HTTP health
checks so kubelet 10255 was checked as an approximation of
controller health. Replace with TCP apiserver health checks
to detect unhealth or unresponsive apiservers.
* Drawbacks: GCP provision time increases, tailed logs now
timeout (similar tradeoff in AWS), controllers only span 3
zones instead of the exact number in the region
* Workaround in Typhoon has been known and posted for 5 months,
but there still appears to be no better alternative. Its
probably time to support multi-master and accept the downsides
* Expose etcd metrics to workers so Prometheus can
run on a worker, rather than a controller
* Drop temporary firewall rules allowing Prometheus
to run on a controller and scrape targes
* Related to https://github.com/poseidon/typhoon/pull/175
* Use etcd v3.3 --listen-metrics-urls to expose only metrics
data via http://0.0.0.0:2381 on controllers
* Add Prometheus discovery for etcd peers on controller nodes
* Temporarily drop two noisy Prometheus alerts
* AWS and Google Cloud make use of auto-scaling groups
and managed instance groups, respectively. As such, the
kubeconfig is already held in cloud user-data
* Controller instances are provisioned with a kubeconfig
from user-data. Its redundant to use a Terraform remote
file copy step for the kubeconfig.
* Introduce the ability to support Container Linux Config
"snippets" for controllers and workers on cloud platforms.
This allows end-users to customize hosts by providing Container
Linux configs that are additively merged into the base configs
defined by Typhoon. Config snippets are validated, merged, and
show any errors during `terraform plan`
* Example uses include adding systemd units, network configs,
mounts, files, raid arrays, or other disk provisioning features
provided by Container Linux Configs (using Ignition low-level)
* Requires terraform-provider-ct v0.2.1 plugin
* Add a node-role.kubernetes.io/controller="true" node label
to controllers so Prometheus service discovery can filter to
services that only run on controllers (i.e. masters)
* Leave node-role.kubernetes.io/master="" untouched as its
a Kubernetes convention
* Fix issue where worker firewall rules didn't apply to
additional workers attached to a GCP cluster using the new
"worker pools" feature (unreleased, #148). Solves host
connection timeouts and pods not being scheduled to attached
worker pools.
* Add `name` field to GCP internal worker module to represent
the unique name of of the worker pool
* Use `cluster_name` field of GCP internal worker module for
passing the name of the cluster to which workers should be
attached
* This reverts commit cce4537487.
* Provider passing to child modules is complex and the behavior
changed between Terraform v0.10 and v0.11. We're continuing to
allow both versions so this change should be reverted. For the
time being, those using our internal Terraform modules will have
to be aware of the minimum version for AWS and GCP providers,
there is no good way to do enforcement.
* Set defaults for internal worker module's count,
machine_type, and os_image
* Allow "pools" of homogeneous workers to be created
using the google-cloud/kubernetes/workers module
* Template terraform-render-bootkube's multi-line kubeconfig
output using the right indentation
* Add `kubeconfig` variable to google-cloud controllers and
workers Terraform submodules
* Remove `kubeconfig_*` variables from google-cloud controllers
and workers Terraform submodules
* Set Kubelet search path for flexvolume plugins
to /var/lib/kubelet/volumeplugins
* Add support for flexvolume plugins on AWS, GCE, and DO
* See 9548572d98 which added flexvolume support for bare-metal
* Remove PersistentVolumeLabel admission controller flag
* Switch Deployments and DaemonSets to apps/v1
* Minor update to pod-checkpointer image version
* Add flannel service account and limited RBAC cluster role
* Change DaemonSets to tolerate NoSchedule and NoExecute taints
* Remove deprecated apiserver --etcd-quorum-read flag
* Update Calico from v3.0.1 to v3.0.2
* Add Calico GlobalNetworkSet CRD
* https://github.com/poseidon/terraform-render-bootkube/pull/44
* Allow kube-dns to respond to DNS queries with a custom
suffix, instead of the default 'cluster.local'
* Useful when multiple clusters exist on the same local
network and wish to query services on one another
* When restarting masters, `etcd-member.service` may fail to lookup peers if
/etc/resolv.conf hasn't been populated yet. Require the wait-for-dns.service.
* Update hyperkube from v1.8.3 to v1.8.4
* Remove flock from bootstrap-apiserver and kube-apiserver
* Remove unused critical-pod annotations in manifests
* Use service accounts for kube-proxy and pod-checkpointer
* Update Calico from v2.6.1 to v2.6.3
* Update flannel from v0.9.0 to v0.9.1
* Remove Calico termination grace period to prevent calico
from getting stuck for extended periods
* https://github.com/poseidon/terraform-render-bootkube/pull/29
* With google provider 1.2, target pool instances can use self_link
and zone/name formats without causing a diff on each plan
* Original workaround: 77fc14db71
* Require the controller module to be completed before starting
to remote exec bootkube start, otherwise its possible the controller
nodes were created, but not the network load balancer
* Change controllers ASG to heterogeneous EC2 instances
* Create DNS records for each controller's private IP for etcd
* Change etcd to run on-host, across controllers (etcd-member.service)
* Reduce time to bootstrap a cluster
* Deprecate self-hosted-etcd on the AWS platform
* Change controllers from a managed group to individual instances
* Create discrete DNS records to each controller's private IP for etcd
* Change etcd to run on-host, across controllers (etcd-member.service)
* Reduce time to bootstrap a cluster
* Deprecate self-hosted-etcd on the Google Cloud platform
* Controller preemption is not safe or covered in documentation. Delete
the option, the variable is a holdover from old experiments
* Note, worker_preemeptible is still a great feature that's supported
* Change Google Cloud module to require the `region` variable
* Workers are created in random zones within the given region
* Tolerate Google Cloud zone failures or capacity issues
* If workers are preempted (if enabled), replacement instances can
be drawn from any zone in the region, which should avoid scheduling
issues that were possible before if a single zone aggressively
preempts instances (presumably due to Google Cloud capacity)
* Kubernetes v1.8.2 fixes a memory leak in the v1.8.1 apiserver
* Switch to using the `gcr.io/google_containers/hyperkube` for the
on-host kubelet and shutdown drains
* Update terraform-render-bootkube manifests generation
* Update flannel from v0.8.0 to v0.9.0
* Add `hairpinMode` to flannel CNI config
* Add `--no-negcache` to kube-dns dnsmasq
* Terraform provider "google" plugin releases leave the disk
device_name as "" by default. Recently the API has started to
set a default name "persistent-disk-0". Plan and apply show
all instance groups need to be recreated to "fix" the name
* Impact: Controller and worker instance groups are deleted
and recreated, deleting data on controllers and bringing
down clusters
* Fix: Explicitly set the disk_name to persistent-disk-0 so
that terraform finds no diff needs to be applied.
* https://github.com/poseidon/typhoon/issues/34
* https://github.com/terraform-providers/terraform-provider-google/issues/574
* Mounting NFS exports as volumes from some NFS servers fails because
the kubelet isn't starting rpc-statd as expected. Describing pods
that are stuck creating shows rpc.statd is required for remote locking
* Starting rpc-statd.service resolves the issue and all NFS mounts
seem to be working.
* Recommended approach https://github.com/coreos/bugs/issues/2074
* Mount host /opt/cni/bin in Kubelet to use host's CNI plugins
* Switch /var/run/kubelet-pod.uuid to /var/cache/kubelet-pod.uuid
to persist between reboots and cleanup old Kubelet pods
* Organize Kubelet flags in alphabetical order
* Calico on GCE with IP-in-IP encapsulation and MTU 1440
* Calico on DO with IP-in-IP encapsulation and MTU 1440
* Digital Ocean firewalls don't support IPIP protocol yet
* In terraform-provider-google v0.1.3, it is no longer neccessary
to supply a (duplicated) value for the instance_template field
automatic_restart
* Previously this field was set to match the scheduling
automatic_restart since the field defaulted to true and would
cause plan to always show changes were needed
Dalton Hubble
Jordan Pittier
JordanP
Lucas Servén Marín
Ben Drucker
William Zhang
Barak Michener
Lars Fenneberg
Vincent Palmer