* Use unique dashboard ID so that multiple replicas of Grafana
serve dashboards with uniform paths
* Fix issue where refreshing a dashboard served by one replica
could show a 404 unless the request went to the same replica
* terraform-provider-aws v2.23.0 allows AWS root block devices
to enable encryption by default.
* Require updating terraform-provider-aws to v2.23.0 or higher
* Enable root EBS device encryption by default for controller
instances and worker instances in auto-scaling groups
For comparison:
* Google Cloud persistent disks have been encrypted by
default for years
* Azure managed disk encryption is not ready yet (#486)
* Add a CoreDNS dashboard originally based on an upstream dashboard,
but now customized according to preferences
* Add an Nginx Ingress Controller based on an upstream dashboard,
but customized according to preferences
* Add all Azure controllers to the apiserver load balancer
backend address pool
* Previously, kube-apiserver availability relied on the 0th
controller being up. Multi-controller was just providing etcd
data redundancy
* Allow updating terraform-provider-ct to any release
beyond v0.3.2, but below v1.0. This relaxes the prior
constraint that allowed only v0.3.y provider versions
* Run kube-apiserver as a non-root user (nobody). User
no longer needs to bind low number ports.
* On most platforms, the kube-apiserver load balancer listens
on 6443 and fronts controllers with kube-apiserver pods using
port 6443. Google Cloud TCP proxy load balancers cannot listen
on 6443. However, GCP's load balancer can be made to listen on
443, while kube-apiserver uses 6443 across all platforms.
* Fix a GCP errata item https://github.com/poseidon/typhoon/wiki/Errata
* Removal of a Google Cloud cluster often required 2 runs of
`terraform apply` because network resource deletes timeout
after 4m. Raise the network deletion timeout to 6m to
ensure apply only needs to be run once to remove a cluster
* google_compute_backend_services use nested blocks to define
backends (instance groups heterogeneous controllers)
* Use Terraform v0.12.x dynamic blocks so the apiserver backend
service can refer to (up to zone-many) controller instance groups
* Previously, with Terraform v0.11.x, the apiserver backend service
had to list a fixed set of backends to span controller nodes across
zones in multi-controller setups. 3 backends were used because each
GCP region offered at least 3 zones. Single-controller clusters had
the cosmetic ugliness of unused instance groups
* Allow controllers to span more than 3 zones if avilable in a
region (e.g. currently only us-central1, with 4 zones)
Related:
* https://www.terraform.io/docs/providers/google/r/compute_backend_service.html
* https://www.terraform.io/docs/configuration/expressions.html#dynamic-blocks
* Delay changing README example. Its prominent display
on github.com may lead to new users copying it, even
though it corresponds to an "in between releases" state
and v1.14.4 doesn't exist yet
* Leave docs tutorials the same, they can reflect master
* Provide Terraform v0.11 to v0.12 migration guide. Show an
in-place strategy and a move resources strategy
* Describe in-place modifying an existing cluster and providers,
using the Terraform helper to edit syntax, and checking the
plan produces a zero diff
* Describe replacing existing clusters by creating a new config
directory for use with Terraform v0.12 only and moving resources
one by one
* Provide some limited advise on migrating non-Typhoon resources
* Replace v0.11 bracket type hints with Terraform v0.12 list expressions
* Use expression syntax instead of interpolated strings, where suggested
* Update bare-metal tutorial
* Define `clc_snippets` type constraint map(list(string))
* Define Terraform and plugin version requirements in versions.tf
* Require matchbox ~> 0.3.0 to support Terraform v0.12
* Require ct ~> 0.3.2 to support Terraform v0.12
* Azure only allows `eviction_policy` to be set for Low priority VMs.
Supporting Low priority VMs meant when Regular VMs were used, each
`terraform apply` rolled workers, to set eviction_policy to null.
* Terraform v0.12 nullable variables fix the issue and plan does not
produce a diff
* Replace v0.11 bracket type hints with Terraform v0.12 list expressions
* Use expression syntax instead of interpolated strings, where suggested
* Update Azure tutorial and worker pools documentation
* Define Terraform and plugin version requirements in versions.tf
* Require azurerm ~> 1.27 to support Terraform v0.12
* Require ct ~> 0.3.2 to support Terraform v0.12
* Replace v0.11 bracket type hints with Terraform v0.12 list expressions
* Use expression syntax instead of interpolated strings, where suggested
* Update Google Cloud tutorial and worker pools documentation
* Define Terraform and plugin version requirements in versions.tf
* Require google ~> 2.5 to support Terraform v0.12
* Require ct ~> 0.3.2 to support Terraform v0.12
* Replace v0.11 bracket type hints with Terraform v0.12 list expressions
* Use expression syntax instead of interpolated strings, where suggested
* Update AWS tutorial and worker pools documentation
* Define Terraform and plugin version requirements in versions.tf
* Require aws ~> 2.7 to support Terraform v0.12
* Require ct ~> 0.3.2 to support Terraform v0.12
* Replace v0.11 bracket type hints with Terraform v0.12 list expressions
* Use expression syntax instead of interpolated strings, where suggested
* Update DigitalOcean tutorial documentation
* Define Terraform and plugin version requirements in versions.tf
* Require digitalocean ~> v1.3 to support Terraform v0.12
* Require ct ~> v0.3.2 to support Terraform v0.12
* This change affects users who use worker pools on AWS, GCP, or
Azure with a Container Linux derivative
* Rename worker pool modules' `count` variable to `worker_count`,
because `count` will be a reserved variable name in Terraform v0.12
* Fix to remove a trailing slash that was erroneously introduced
in the scripting that updated from v1.14.1 to v1.14.2
* Workaround before this fix was to re-run `terraform init`
* Introduce "calico" as a `networking` option on Azure and DigitalOcean
using Calico's new VXLAN support (similar to flannel). Flannel remains
the default on these platforms for now.
* Historically, DigitalOcean and Azure only allowed Flannel as the
CNI provider, since those platforms don't support IPIP traffic that
was previously required for Calico.
* Looking forward, its desireable for Calico to become the default
across Typhoon clusters, since it provides NetworkPolicy and a
consistent experience
* No changes to AWS, GCP, or bare-metal where Calico remains the
default CNI provider. On these platforms, IPIP mode will always
be used, since its available and more performant than vxlan
* DigitalOcean clusters must secure copy a kubeconfig to
worker nodes, but Terraform could decide to try copying
before firewall rules have been added to allow SSH access.
* Add an explicit dependency on adding firewall rules first
* Change flannel port from the kernel default 8472 to the
IANA assigned VXLAN port 4789
* Update firewall rules or security groups for VXLAN
* Why now? Calico now offers its own VXLAN backend so
standardizing on the IANA port will simplify config
* https://github.com/coreos/flannel/blob/master/Documentation/backends.md#vxlan
* This reverts commit 6e5d66cf66
* kube-state-metrics v1.6.0-rc.0 fires KubeDeploymentReplicasMismatch
alerts where its own Deployment doesn't have replicas available,
(kube_deployment_status_replicas_available) even though all replicas
are available according to kubectl inspection
* This problem was present even with the CSR ClusterRole fix
(https://github.com/kubernetes/kube-state-metrics/pull/717)
* Add ability to load balance TCP/UDP applications (e.g. NodePort)
* Output the load balancer ID as `loadbalancer_id`
* Output `worker_security_group_name` and `worker_address_prefix`
for extending firewall rules
* Add an `enable_aggregation` variable to enable the kube-apiserver
aggregation layer for adding extension apiservers to clusters
* Aggregation is **disabled** by default. Typhoon recommends you not
enable aggregation. Consider whether less invasive ways to achieve your
goals are possible and whether those goals are well-founded
* Enabling aggregation and extension apiservers increases the attack
surface of a cluster and makes extensions a part of the control plane.
Admins must scrutinize and trust any extension apiserver used.
* Passing a v1.14 CNCF conformance test requires aggregation be enabled.
Having an option for aggregation keeps compliance, but retains the
stricter security posture on default clusters
* Refresh rules and dashboards from upstreams
* Add new Kubernetes "workload" dashboards
* View pods in a workload (deployment/daemonset/statefulset)
* View workloads in a namespace
* Define firewall rules on DigitialOcean to match rules used on AWS,
GCP, and Azure
* Output `controller_tag` and `worker_tag` to simplify custom firewall
rule creation
* Add ability to load balance TCP applications (e.g. NodePort)
* Output the network load balancer ARN as `nlb_id`
* Accept a `worker_target_groups` (ARN) list to which worker
instances should be added
* AWS NLBs and target groups don't support UDP
* Background: A managed instance group of workers is used in backend
services for global load balancing (HTTP/HTTPS Ingress) and output
for custom global load balancing use cases
* Add worker instances to a target pool load balancing TCP/UDP
applications (NodePort or proxied). Output as `worker_target_pool`
* Health check for workers with a healthy Ingress controller. Forward
rules (regional) to target pools don't support different external and
internal ports so choosing nodes with Ingress allows proxying as a
workaround
* A target pool is a logical grouping only. It doesn't add costs to
clusters or worker pools
* Allow traffic from Grafana to Prometheus in monitoring
* Allow traffic from Prometheus to Prometheus in monitoring
* NetworkPolicy denies non-whitelisted traffic. Define policy
to allow other access
* Add calico-ipam CRDs and RBAC permissions
* Switch IPAM from host-local to calico-ipam
* `calico-ipam` subnets `ippools` (defaults to pod CIDR) into
`ipamblocks` (defaults to /26, but set to /24 in Typhoon)
* `host-local` subnets the pod CIDR based on the node PodCIDR
field (set via kube-controller-manager as /24's)
* Create a custom default IPv4 IPPool to ensure the block size
is kept at /24 to allow 110 pods per node (Kubernetes default)
* Retaining host-local was slightly preferred, but Calico v3.6
is migrating all usage to calico-ipam. The codepath that skipped
calico-ipam for KDD was removed
* https://docs.projectcalico.org/v3.6/release-notes/
* Heapster addon powers `kubectl top`
* In early Kubernetes, people legitimately used and expected
`kubectl top` to work, so the optional addon was provided
* Today the standards are different. Many better monitoring
tools exist, that are also less coupled to Kubernetes "kubectl
top" reliance on a non-core extensions means its not in-scope
for minimal Kubernetes clusters. No more exceptionalism
* Finally, Heapster isn't that useful anymore. Its manifests
have no need for Typhoon-specific modification
* Look to prior releases if you still wish to apply heapster
Dalton Hubble