* Use Kubelet bearer token authn/authz to scrape metrics
* Drop RBAC permission from nodes/proxy to nodes/metrics
* Stop proxying kubelet scrapes through the apiserver, since
this required higher privilege (nodes/proxy) and can add
load to the apiserver on large clusters
* Replace os_channel variable with os_image to align naming
across clouds. Users who set this option to stable, beta, or
alpha should now set os_image to coreos-stable, coreos-beta,
or coreos-alpha.
* Default os_image to coreos-stable. This continues to use
the most recent image from the stable channel as always.
* Allow Container Linux derivative Flatcar Linux by setting
os_image to `flatcar-stable`, `flatcar-beta`, `flatcar-alpha`
* Raise minimum Terraform version to v0.11.0
* Terraform v0.11.x has been supported since Typhoon v1.9.2
and Terraform v0.10.x was last released in Nov 2017. I'd like
to stop worrying about v0.10.x and remove migration docs as
a later followup
* Migration docs docs/topics/maintenance.md#terraform-v011x
* Add `worker_price` to allow worker spot instances. Defaults
to empty string for the worker autoscaling group to use regular
on-demand instances.
* Add `spot_price` to internal `workers` module for spot worker
pools
* Note: Unlike GCP `preemptible` workers, spot instances require
you to pick a bid price.
* Observed frequent kube-scheduler and controller-manager
restarts with Calico as the CNI provider. Root cause was
unclear since control plane was functional and tests of
pod to pod network connectivity passed
* Root cause: Calico sets up cali* and tunl* network interfaces
for containers on hosts. NetworkManager tries to manage these
interfaces. It periodically disconnected veth pairs. Logs did
not surface this issue since its not an error per-se, just Calico
and NetworkManager dueling for control. Kubernetes correctly
restarted pods failing health checks and ensured 2 replicas were
running so the control plane functioned mostly normally. Pod to
pod connecitivity was only affected occassionally. Pain to debug.
* Solution: Configure NetworkManager to ignore the Calico ifaces
per Calico's recommendation. Cloud-init writes files after
NetworkManager starts, so a restart is required on first boot. On
subsequent boots, the file is present so no restart is needed
* (containerized) kube-proxy warns that it is unable to
load the ip_vs kernel module despite having the correct
mounts. Atomic uses an xz compressed module and modprobe
in the container was not compiled with compression support
* Workaround issue for now by always loading ip_vs on-host
* https://github.com/kubernetes/kubernetes/issues/60
* http://www.projectatomic.io/blog/2018/04/fedora-atomic-20-apr-18/
* Atomic publishes nightly AMIs which sometimes don't boot
or have issues. Until there is a source of reliable AMIs,
pin the best known working AMI
* Rel 66a66f0d18544591ffdbf8fae9df790113c93d72
* Use the upstream bootkube image packaged with the
required metadata to be usable as a system container
under systemd
* Run bootkube with runc so no host level components
use Docker any more. Docker is still the runtime
* Remove bootkube script and old systemd unit
* Change kubelet system image to use --cgroups-per-qos=true
(default) instead of false
* Change kubelet system image to use --enforce-node-allocatable=pods
instead of an empty string
* Fix kubelet port-forward on Google Cloud / Fedora Atomic
* Mount the host's /etc/hosts in kubelet system containers
* Problem: kubelet runc system containers on Atomic were not
mounting the host's /etc/hosts, like rkt-fly does on Container
Linux. `kubectl port-forward` calls socat with localhost. DNS
servers on AWS, DO, and in many bare-metal environments resolve
localhost to the caller as a convenience. Google Cloud notably
does not nor is it required to do so and this surfaced the
missing /etc/hosts in runc kubelet namespaces.
* Enable etcd v3.3 metrics to expose metrics for
scraping by Prometheus
* Use k8s.gcr.io instead of gcr.io/google_containers
* Add flexvolume plugin mount to controller manager
* Update kube-dns from v1.14.8 to v1.14.9
* Mount /opt/cni/bin in kubelet system container so
CNI plugin binaries can be found. Before, flannel
worked because the kubelet falls back to flannel
plugin baked into the hyperkube (undesired)
* Move the CNI bin install location later, since /opt
changes may be lost between ostree rebases
* Use the upstream hyperkube image packaged with the
required metadata to be usable as a system container
under systemd
* Fix port-forward since socat is included
* Update manifests for Kubernetes v1.10.0
* Update etcd from v3.3.2 to v3.3.3
* Add disk_type optional variable on AWS
* Remove redundant kubeconfig copy on AWS
* Distribute etcd secres only to controllers
* Organize module variables and ssh steps
* Expose etcd metrics to workers so Prometheus can
run on a worker, rather than a controller
* Drop temporary firewall rules allowing Prometheus
to run on a controller and scrape targes
* Related to https://github.com/poseidon/typhoon/pull/175
* Use etcd v3.3 --listen-metrics-urls to expose only metrics
data via http://0.0.0.0:2381 on controllers
* Add Prometheus discovery for etcd peers on controller nodes
* Temporarily drop two noisy Prometheus alerts
* Change EBS volume type from `standard` ("prior generation)
to `gp2`. Prometheus alerts are tuned for SSDs
* Other platforms have fast enough disks by default
* AWS and Google Cloud make use of auto-scaling groups
and managed instance groups, respectively. As such, the
kubeconfig is already held in cloud user-data
* Controller instances are provisioned with a kubeconfig
from user-data. Its redundant to use a Terraform remote
file copy step for the kubeconfig.
* Introduce the ability to support Container Linux Config
"snippets" for controllers and workers on cloud platforms.
This allows end-users to customize hosts by providing Container
Linux configs that are additively merged into the base configs
defined by Typhoon. Config snippets are validated, merged, and
show any errors during `terraform plan`
* Example uses include adding systemd units, network configs,
mounts, files, raid arrays, or other disk provisioning features
provided by Container Linux Configs (using Ignition low-level)
* Requires terraform-provider-ct v0.2.1 plugin
* Add a node-role.kubernetes.io/controller="true" node label
to controllers so Prometheus service discovery can filter to
services that only run on controllers (i.e. masters)
* Leave node-role.kubernetes.io/master="" untouched as its
a Kubernetes convention
* This reverts commit cce4537487.
* Provider passing to child modules is complex and the behavior
changed between Terraform v0.10 and v0.11. We're continuing to
allow both versions so this change should be reverted. For the
time being, those using our internal Terraform modules will have
to be aware of the minimum version for AWS and GCP providers,
there is no good way to do enforcement.
* Allow groups of workers to be defined and joined to
a cluster (i.e. worker pools)
* Move worker resources into a Terraform submodule
* Output variables needed for passing to worker pools
* Add usage docs for AWS worker pools (advanced)
* Template terraform-render-bootkube's multi-line kubeconfig
output using the right indentation
* Add `kubeconfig` variable to google-cloud controllers and
workers Terraform submodules
* Remove `kubeconfig_*` variables from google-cloud controllers
and workers Terraform submodules
* Set Kubelet search path for flexvolume plugins
to /var/lib/kubelet/volumeplugins
* Add support for flexvolume plugins on AWS, GCE, and DO
* See 9548572d98 which added flexvolume support for bare-metal
* Remove PersistentVolumeLabel admission controller flag
* Switch Deployments and DaemonSets to apps/v1
* Minor update to pod-checkpointer image version
* Add flannel service account and limited RBAC cluster role
* Change DaemonSets to tolerate NoSchedule and NoExecute taints
* Remove deprecated apiserver --etcd-quorum-read flag
* Update Calico from v3.0.1 to v3.0.2
* Add Calico GlobalNetworkSet CRD
* https://github.com/poseidon/terraform-render-bootkube/pull/44
* Allow kube-dns to respond to DNS queries with a custom
suffix, instead of the default 'cluster.local'
* Useful when multiple clusters exist on the same local
network and wish to query services on one another
* When restarting masters, `etcd-member.service` may fail to lookup peers if
/etc/resolv.conf hasn't been populated yet. Require the wait-for-dns.service.
* Update hyperkube from v1.8.3 to v1.8.4
* Remove flock from bootstrap-apiserver and kube-apiserver
* Remove unused critical-pod annotations in manifests
* Use service accounts for kube-proxy and pod-checkpointer
* Update Calico from v2.6.1 to v2.6.3
* Update flannel from v0.9.0 to v0.9.1
* Remove Calico termination grace period to prevent calico
from getting stuck for extended periods
* https://github.com/poseidon/terraform-render-bootkube/pull/29
* Prometheus proxies through the apiserver to scrape kubelets
* In multi-controller setups, an apiserver must be able to scrape
kubelets (10250) on other controllers
* ELB distributing load across controllers is no longer the mechanism
used to SSH to instances to distribute secrets
* Focus the ELB on load balancing across apiserver and edit the HTTP
health check to an SSL:443 check
