* CoreOS Container Linux was deprecated in v1.18.3
* Continue transitioning docs and modules from supporting
both CoreOS and Flatcar "variants" of Container Linux to
now supporting Flatcar Linux and equivalents
Action Required: Update the Flatcar Linux modules `source`
to replace `s/container-linux/flatcar-linux`. See docs for
examples
* Use docker to run the `kubelet.service` container
* Update Kubelet mounts to match Fedora CoreOS
* Remove unused `/etc/ssl/certs` mount (see
https://github.com/poseidon/typhoon/pull/810)
* Remove unused `/usr/share/ca-certificates` mount
* Remove `/etc/resolv.conf` mount, Docker default is ok
* Change `delete-node.service` to use docker instead of rkt
and inline ExecStart, as was done on Fedora CoreOS
* Fix permission denied on shutdown `delete-node`, caused
by the kubeconfig mount changing with the introduction of
node TLS bootstrap
Background
* podmand, rkt, and runc daemonless container process runners
provide advantages over the docker daemon for system containers.
Docker requires workarounds for use in systemd units where the
ExecStart must tail logs so systemd can monitor the daemonized
container. https://github.com/moby/moby/issues/6791
* Why switch then? On Flatcar Linux, podman isn't shipped. rkt
works, but isn't developing while container standards continue
to move forward. Typhoon has used runc for the Kubelet runner
before in Fedora Atomic, but its more low-level. So we're left
with Docker, which is less than ideal, but shipped in Flatcar
* Flatcar Linux appears to be shifting system components to
use docker, which does provide some limited guards against
breakages (e.g. Flatcar cannot enable docker live restore)
* Originally, poseidon/terraform-render-bootstrap generated
TLS certificates, manifests, and cluster "assets" written
to local disk (`asset_dir`) during terraform apply cluster
bootstrap
* Typhoon v1.17.0 introduced bootstrapping using only Terraform
state to store cluster assets, to avoid ever writing sensitive
materials to disk and improve automated use-cases. `asset_dir`
was changed to optional and defaulted to "" (no writes)
* Typhoon v1.18.0 deprecated the `asset_dir` variable, removed
docs, and announced it would be deleted in future.
* Add Terraform output `assets_dir` map
* Remove the `asset_dir` variable
Cluster assets are now stored in Terraform state only. For those
who wish to write those assets to local files, this is possible
doing so explicitly.
```
resource local_file "assets" {
for_each = module.yavin.assets_dist
filename = "some-assets/${each.key}"
content = each.value
}
```
Related:
* https://github.com/poseidon/typhoon/pull/595
* https://github.com/poseidon/typhoon/pull/678
* CoreOS Container Linux was deprecated in v1.18.3 (May 2020)
in favor of Fedora CoreOS and Flatcar Linux. CoreOS Container
Linux references were kept to give folks more time to migrate,
but AMIs have now been deleted. Time is up.
Rel: https://coreos.com/os/eol/
* seccomp graduated to GA in Kubernetes v1.19. Support for
seccomp alpha annotations will be removed in v1.22
* Replace seccomp annotations with the GA seccompProfile
field in the PodTemplate securityContext
* Switch profile from `docker/default` to `runtime/default`
(no effective change, since docker is the runtime)
* Verify with docker inspect SecurityOpt. Without the profile,
you'd see `seccomp=unconfined`
Related: https://github.com/poseidon/terraform-render-bootstrap/pull/215
* Fix race condition for bootstrap-secrets SELinux context on non-bootstrap controllers in multi-controller FCOS clusters
* On first boot from disk on non-bootstrap controllers, adding bootstrap-secrets races with kubelet.service starting, which can cause the secrets assets to have the wrong label until kubelet.service restarts (service, reboot, auto-update)
* This can manifest as `kube-apiserver`, `kube-controller-manager`, and `kube-scheduler` pods crashlooping on spare controllers on first cluster creation
* Allow use of terraform-provider-matchbox v0.3+ (which
allows v0.3.0 <= version < v1.0) for any pre 1.0 release
* Before, the requirement was v0.3.0 <= version < v0.4.0
* Fedora CoreOS now ships systemd-udev's `default.link` while
Flannel relies on being able to pick its own MAC address for
the `flannel.1` link for tunneled traffic to reach cni0 on
the destination side, without being dropped
* This change first appeared in FCOS testing-devel 32.20200624.20.1
and is the behavior going forward in FCOS since it was added
to align FCOS network naming / configs with the rest of Fedora
and address issues related to the default being missing
* Flatcar Linux (and Container Linux) has a specific flannel.link
configuration builtin, so it was not affected
* https://github.com/coreos/fedora-coreos-tracker/issues/574#issuecomment-665487296
Note: Typhoon's recommended and default CNI provider is Calico,
unless `networking` is set to flannel directly.
* Accept experimental CNI `networking` mode "cilium"
* Run Cilium v1.8.0-rc4 with overlay vxlan tunnels and a
minimal set of features. We're interested in:
* IPAM: Divide pod_cidr into /24 subnets per node
* CNI networking pod-to-pod, pod-to-external
* BPF masquerade
* NetworkPolicy as defined by Kubernetes (no L7 Policy)
* Continue using kube-proxy with Cilium probe mode
* Firewall changes:
* Require UDP 8472 for vxlan (Linux kernel default) between nodes
* Optional ICMP echo(8) between nodes for host reachability
(health)
* Optional TCP 4240 between nodes for endpoint reachability (health)
Known Issues:
* Containers with `hostPort` don't listen on all host addresses,
these workloads must use `hostNetwork` for now
https://github.com/cilium/cilium/issues/12116
* Erroneous warning on Fedora CoreOS
https://github.com/cilium/cilium/issues/10256
Note: This is experimental. It is not listed in docs and may be
changed or removed without a deprecation notice
Related:
* https://github.com/poseidon/terraform-render-bootstrap/pull/192
* https://github.com/cilium/cilium/issues/12217
* Remove node label `node.kubernetes.io/master` from controller nodes
* Use `node.kubernetes.io/controller` (present since v1.9.5,
[#160](https://github.com/poseidon/typhoon/pull/160)) to node select controllers
* Rename controller NoSchedule taint from `node-role.kubernetes.io/master` to
`node-role.kubernetes.io/controller`
* Tolerate the new taint name for workloads that may run on controller nodes
and stop tolerating `node-role.kubernetes.io/master` taint
* Kubelet `--lock-file` and `--exit-on-lock-contention` date
back to usage of bootkube and at one point running Kubelet
in a "self-hosted" style whereby an on-host Kubelet (rkt)
started pods, but then a Kubelet DaemonSet was scheduled
and able to take over (hence self-hosted). `lock-file` and
`exit-on-lock-contention` flags supported this pivot. The
pattern has been out of favor (in bootkube too) for years
because of dueling Kubelet complexity
* Typhoon runs Kubelet as a container via an on-host systemd
unit using podman (Fedora CoreOS) or rkt (Flatcar Linux). In
fact, Typhoon no longer uses bootkube or control plane pivot
(let alone Kubelet pivot) and uses static pods since v1.16.0
* https://github.com/poseidon/typhoon/pull/536
* Generated Kubelet TLS certificate and key are not longer
used or distributed to machines since Kubelet TLS bootstrap
is used instead. Remove the certificate and key from state
* Enable terraform-provider-ct `strict` mode for parsing
Container Linux Configs and snippets
* Fix Container Linux Config systemd unit syntax `enable`
(old) to `enabled`
* Align with Fedora CoreOS which uses strict mode already
* Build Kubelet container images internally and publish
to Quay and Dockerhub (new) as an alternative in case of
registry outage or breach
* Use our infra to provide single and multi-arch (default)
Kublet images for possible future use
* Docs: Show how to use alternative Kubelet images via
snippets and a systemd dropin (builds on #737)
Changes:
* Update docs with changes to Kubelet image building
* If you prefer to trust images built by Quay/Dockerhub,
automated image builds are still available with unique
tags (albeit with some limitations):
* Quay automated builds are tagged `build-{short_sha}`
(limit: only amd64)
* Dockerhub automated builts are tagged `build-{tag}`
and `build-master` (limit: only amd64, no shas)
Links:
* Kubelet: https://github.com/poseidon/kubelet
* Docs: https://typhoon.psdn.io/topics/security/#container-images
* Registries:
* quay.io/poseidon/kubelet
* docker.io/psdn/kubelet
* Write the systemd kubelet.service to use `KUBELET_IMAGE`
as the Kubelet. This provides a nice way to use systemd
dropins to temporarily override the image (e.g. during a
registry outage)
Note: Only Typhoon Kubelet images and registries are supported.
* Set a consistent MCS level/range for Calico install-cni
* Note: Rebooting a node was a workaround, because Kubelet
relabels /etc/kubernetes(/cni/net.d)
Background:
* On SELinux enforcing systems, the Calico CNI install-cni
container ran with default SELinux context and a random MCS
pair. install-cni places CNI configs by first creating a
temporary file and then moving them into place, which means
the file MCS categories depend on the containers SELinux
context.
* calico-node Pod restarts creates a new install-cni container
with a different MCS pair that cannot access the earlier
written file (it places configs every time), causing the
init container to error and calico-node to crash loop
* https://github.com/projectcalico/cni-plugin/issues/874
```
mv: inter-device move failed: '/calico.conf.tmp' to
'/host/etc/cni/net.d/10-calico.conflist'; unable to remove target:
Permission denied
Failed to mv files. This may be caused by selinux configuration on
the
host, or something else.
```
Note, this isn't a host SELinux configuration issue.
Related:
* https://github.com/poseidon/terraform-render-bootstrap/pull/186
