* Adjust firewall rules, security groups, cloud load balancers,
and generated kubeconfig's
* Facilitates some future simplifications and cost reductions
* Bare-Metal users who exposed kube-apiserver on a WAN via their
router or load balancer will need to adjust its configuration.
This is uncommon, most apiserver are on LAN and/or behind VPN
so no routing infrastructure is configured with the port number
* Use Kubelet bearer token authn/authz to scrape metrics
* Drop RBAC permission from nodes/proxy to nodes/metrics
* Stop proxying kubelet scrapes through the apiserver, since
this required higher privilege (nodes/proxy) and can add
load to the apiserver on large clusters
* Raise minimum Terraform version to v0.11.0
* Terraform v0.11.x has been supported since Typhoon v1.9.2
and Terraform v0.10.x was last released in Nov 2017. I'd like
to stop worrying about v0.10.x and remove migration docs as
a later followup
* Migration docs docs/topics/maintenance.md#terraform-v011x
* Observed frequent kube-scheduler and controller-manager
restarts with Calico as the CNI provider. Root cause was
unclear since control plane was functional and tests of
pod to pod network connectivity passed
* Root cause: Calico sets up cali* and tunl* network interfaces
for containers on hosts. NetworkManager tries to manage these
interfaces. It periodically disconnected veth pairs. Logs did
not surface this issue since its not an error per-se, just Calico
and NetworkManager dueling for control. Kubernetes correctly
restarted pods failing health checks and ensured 2 replicas were
running so the control plane functioned mostly normally. Pod to
pod connecitivity was only affected occassionally. Pain to debug.
* Solution: Configure NetworkManager to ignore the Calico ifaces
per Calico's recommendation. Cloud-init writes files after
NetworkManager starts, so a restart is required on first boot. On
subsequent boots, the file is present so no restart is needed
* (containerized) kube-proxy warns that it is unable to
load the ip_vs kernel module despite having the correct
mounts. Atomic uses an xz compressed module and modprobe
in the container was not compiled with compression support
* Workaround issue for now by always loading ip_vs on-host
* https://github.com/kubernetes/kubernetes/issues/60
* Use the upstream bootkube image packaged with the
required metadata to be usable as a system container
under systemd
* Run bootkube with runc so no host level components
use Docker any more. Docker is still the runtime
* Remove bootkube script and old systemd unit
* Change kubelet system image to use --cgroups-per-qos=true
(default) instead of false
* Change kubelet system image to use --enforce-node-allocatable=pods
instead of an empty string
* Fix kubelet port-forward on Google Cloud / Fedora Atomic
* Mount the host's /etc/hosts in kubelet system containers
* Problem: kubelet runc system containers on Atomic were not
mounting the host's /etc/hosts, like rkt-fly does on Container
Linux. `kubectl port-forward` calls socat with localhost. DNS
servers on AWS, DO, and in many bare-metal environments resolve
localhost to the caller as a convenience. Google Cloud notably
does not nor is it required to do so and this surfaced the
missing /etc/hosts in runc kubelet namespaces.
* Allow multi-controller clusters on Google Cloud
* GCP regional network load balancers have a long open
bug in which requests originating from a backend instance
are routed to the instance itself, regardless of whether
the health check passes or not. As a result, only the 0th
controller node registers. We've recommended just using
single master GCP clusters for a while
* https://issuetracker.google.com/issues/67366622
* Workaround issue by switching to a GCP TCP Proxy load
balancer. TCP proxy lb routes traffic to a backend service
(global) of instance group backends. In our case, spread
controllers across 3 zones (all regions have 3+ zones) and
organize them in 3 zonal unmanaged instance groups that
serve as backends. Allows multi-controller cluster creation
* GCP network load balancers only allowed legacy HTTP health
checks so kubelet 10255 was checked as an approximation of
controller health. Replace with TCP apiserver health checks
to detect unhealth or unresponsive apiservers.
* Drawbacks: GCP provision time increases, tailed logs now
timeout (similar tradeoff in AWS), controllers only span 3
zones instead of the exact number in the region
* Workaround in Typhoon has been known and posted for 5 months,
but there still appears to be no better alternative. Its
probably time to support multi-master and accept the downsides
* Expose etcd metrics to workers so Prometheus can
run on a worker, rather than a controller
* Drop temporary firewall rules allowing Prometheus
to run on a controller and scrape targes
* Related to https://github.com/poseidon/typhoon/pull/175
* Use etcd v3.3 --listen-metrics-urls to expose only metrics
data via http://0.0.0.0:2381 on controllers
* Add Prometheus discovery for etcd peers on controller nodes
* Temporarily drop two noisy Prometheus alerts
* AWS and Google Cloud make use of auto-scaling groups
and managed instance groups, respectively. As such, the
kubeconfig is already held in cloud user-data
* Controller instances are provisioned with a kubeconfig
from user-data. Its redundant to use a Terraform remote
file copy step for the kubeconfig.
* Introduce the ability to support Container Linux Config
"snippets" for controllers and workers on cloud platforms.
This allows end-users to customize hosts by providing Container
Linux configs that are additively merged into the base configs
defined by Typhoon. Config snippets are validated, merged, and
show any errors during `terraform plan`
* Example uses include adding systemd units, network configs,
mounts, files, raid arrays, or other disk provisioning features
provided by Container Linux Configs (using Ignition low-level)
* Requires terraform-provider-ct v0.2.1 plugin
* Add a node-role.kubernetes.io/controller="true" node label
to controllers so Prometheus service discovery can filter to
services that only run on controllers (i.e. masters)
* Leave node-role.kubernetes.io/master="" untouched as its
a Kubernetes convention
* Fix issue where worker firewall rules didn't apply to
additional workers attached to a GCP cluster using the new
"worker pools" feature (unreleased, #148). Solves host
connection timeouts and pods not being scheduled to attached
worker pools.
* Add `name` field to GCP internal worker module to represent
the unique name of of the worker pool
* Use `cluster_name` field of GCP internal worker module for
passing the name of the cluster to which workers should be
attached
* This reverts commit cce4537487.
* Provider passing to child modules is complex and the behavior
changed between Terraform v0.10 and v0.11. We're continuing to
allow both versions so this change should be reverted. For the
time being, those using our internal Terraform modules will have
to be aware of the minimum version for AWS and GCP providers,
there is no good way to do enforcement.
* Set defaults for internal worker module's count,
machine_type, and os_image
* Allow "pools" of homogeneous workers to be created
using the google-cloud/kubernetes/workers module
* Template terraform-render-bootkube's multi-line kubeconfig
output using the right indentation
* Add `kubeconfig` variable to google-cloud controllers and
workers Terraform submodules
* Remove `kubeconfig_*` variables from google-cloud controllers
and workers Terraform submodules
* Set Kubelet search path for flexvolume plugins
to /var/lib/kubelet/volumeplugins
* Add support for flexvolume plugins on AWS, GCE, and DO
* See 9548572d98 which added flexvolume support for bare-metal
* Remove PersistentVolumeLabel admission controller flag
* Switch Deployments and DaemonSets to apps/v1
* Minor update to pod-checkpointer image version
* Add flannel service account and limited RBAC cluster role
* Change DaemonSets to tolerate NoSchedule and NoExecute taints
* Remove deprecated apiserver --etcd-quorum-read flag
* Update Calico from v3.0.1 to v3.0.2
* Add Calico GlobalNetworkSet CRD
* https://github.com/poseidon/terraform-render-bootkube/pull/44
* Allow kube-dns to respond to DNS queries with a custom
suffix, instead of the default 'cluster.local'
* Useful when multiple clusters exist on the same local
network and wish to query services on one another
* When restarting masters, `etcd-member.service` may fail to lookup peers if
/etc/resolv.conf hasn't been populated yet. Require the wait-for-dns.service.
* Update hyperkube from v1.8.3 to v1.8.4
* Remove flock from bootstrap-apiserver and kube-apiserver
* Remove unused critical-pod annotations in manifests
* Use service accounts for kube-proxy and pod-checkpointer
* Update Calico from v2.6.1 to v2.6.3
* Update flannel from v0.9.0 to v0.9.1
* Remove Calico termination grace period to prevent calico
from getting stuck for extended periods
* https://github.com/poseidon/terraform-render-bootkube/pull/29
* With google provider 1.2, target pool instances can use self_link
and zone/name formats without causing a diff on each plan
* Original workaround: 77fc14db71
* Require the controller module to be completed before starting
to remote exec bootkube start, otherwise its possible the controller
nodes were created, but not the network load balancer
Dalton Hubble
Ben Drucker
William Zhang
Barak Michener
Lars Fenneberg
Vincent Palmer