* Quay has historically generated ACI signatures for images to
facilitate rkt's notions of verification (it allowed authors to
actually sign images, though `--trust-keys-from-https` is in use
since etcd and most authors don't sign images). OCI standardization
didn't adopt verification ideas and checking signatures has fallen
out of favor.
* Fix an issue where Quay no longer seems to be generating ACI
signatures for new images (e.g. quay.io/coreos/etcd:v.3.4.4)
* Don't be alarmed by rkt `--insecure-options=image`. It refers
to disabling image signature checking (i.e. docker pull doesn't
check signatures either)
* System containers for Kubelet and bootstrap have transitioned
to the docker:// transport, so there is precedent and this brings
all the system containers on Container Linux controllers into
alignment
* On clouds where workers can scale down or be preempted
(AWS, GCP, Azure), shutdown runs delete-node.service to
remove a node a prevent NotReady nodes from lingering
* Add the delete-node.service that wasn't carried over
from Container Linux and port it to use podman
* Allow users to extend the route table using a data reference
and adding route resources (e.g. unusual peering setups)
* Note: Internally connecting AWS clusters can reduce cross-cloud
flexibility and inhibits blue-green cluster patterns. It is not
recommended
* Add Terraform strip markers to consume beginning and
trailing whitespace in templated Kubelet arguments for
podman (Fedora CoreOS only)
* Fix initial `worker_node_labels` being quietly ignored
on Fedora CoreOS cloud platforms that offer the feature
* Close https://github.com/poseidon/typhoon/issues/650
* Fix the last minor issue for Fedora CoreOS clusters to pass CNCF's
Kubernetes conformance tests
* Kubelet supports a seldom used feature `kubectl logs --limit-bytes=N`
to trim a log stream to a desired length. Kubelet handles this in the
CRI driver. The Kubelet docker shim only supports the limit bytes
feature when Docker is configured with the default `json-file` logging
driver
* CNCF conformance tests started requiring limit-bytes be supported,
indirectly forcing the log driver choice until either the Kubelet or
the conformance tests are fixed
* Fedora CoreOS defaults Docker to use `journald` (desired). For now,
as a workaround to offer conformant clusters, the log driver can
be set back to `json-file`. RHEL CoreOS likely won't have noticed the
non-conformance since its using crio runtime
* https://github.com/kubernetes/kubernetes/issues/86367
Note: When upstream has a fix, the aim is to drop the docker config
override and use the journald default
* Select the most recent fedora-coreos-31 AMI on AWS, instead
of the most recent fedora-coreos-30 AMI (Nov 27, 2019)
* Evaluated with fedora-coreos-31.20200108.2.0-hvm
* Configure kube-proxy --metrics-bind-address=0.0.0.0 (default
127.0.0.1) to serve metrics on 0.0.0.0:10249
* Add firewall rules to allow Prometheus (resides on a worker) to
scrape kube-proxy service endpoints on controllers or workers
* Add a clusterIP: None service for kube-proxy endpoint discovery
* Change kubelet.service on Container Linux nodes to ExecStart Kubelet
inline to replace the use of the host OS kubelet-wrapper script
* Express rkt run flags and volume mounts in a clear, uniform way to
make the Kubelet service easier to audit, manage, and understand
* Eliminate reliance on a Container Linux kubelet-wrapper script
* Typhoon for Fedora CoreOS developed a kubelet.service that similarly
uses an inline ExecStart (except with podman instead of rkt) and a
more minimal set of volume mounts. Adopt the volume improvements:
* Change Kubelet /etc/kubernetes volume to read-only
* Change Kubelet /etc/resolv.conf volume to read-only
* Remove unneeded /var/lib/cni volume mount
Background:
* kubelet-wrapper was added in CoreOS around the time of Kubernetes v1.0
to simplify running a CoreOS-built hyperkube ACI image via rkt-fly. The
script defaults are no longer ideal (e.g. rkt's notion of trust dates
back to quay.io ACI image serving and signing, which informed the OCI
standard images we use today, though they still lack rkt's signing ideas).
* Shipping kubelet-wrapper was regretted at CoreOS, but remains in the
distro for compatibility. The script is not updated to track hyperkube
changes, but it is stable and kubelet.env overrides bridge most gaps
* Typhoon Container Linux nodes have used kubelet-wrapper to rkt/rkt-fly
run the Kubelet via the official k8s.gcr.io hyperkube image using overrides
(new image registry, new image format, restart handling, new mounts, new
entrypoint in v1.17).
* Observation: Most of what it takes to run a Kubelet container is defined
in Typhoon, not in kubelet-wrapper. The wrapper's value is now undermined
by having to workaround its dated defaults. Typhoon may be better served
defining Kubelet.service explicitly
* Typhoon for Fedora CoreOS developed a kubelet.service without the use
of a host OS kubelet-wrapper which is both clearer and eliminated some
volume mounts
* Rename Container Linux Config (CLC) files to *.yaml to align
with Fedora CoreOS Config (FCC) files and for syntax highlighting
* Replace common uses of Terraform `element` (which wraps around)
with `list[index]` syntax to surface index errors
* Original tutorials favored including the platform (e.g.
google-cloud) in modules (e.g. google-cloud-yavin). Prefer
naming conventions where each module / cluster has a simple
name (e.g. yavin) since the platform is usually redundant
* Retain the example cluster naming themes per platform
* Allow generated assets (TLS materials, manifests) to be
securely distributed to controller node(s) via file provisioner
(i.e. ssh-agent) as an assets bundle file, rather than relying
on assets being locally rendered to disk in an asset_dir and
then securely distributed
* Change `asset_dir` from required to optional. Left unset,
asset_dir defaults to "" and no assets will be written to
files on the machine that runs terraform apply
* Enhancement: Managed cluster assets are kept only in Terraform
state, which supports different backends (GCS, S3, etcd, etc) and
optional encryption. terraform apply accesses state, runs in-memory,
and distributes sensitive materials to controllers without making
use of local disk (simplifies use in CI systems)
* Enhancement: Improve asset unpack and layout process to position
etcd certificates and control plane certificates more cleanly,
without unneeded secret materials
Details:
* Terraform file provisioner support for distributing directories of
contents (with unknown structure) has been limited to reading from a
local directory, meaning local writes to asset_dir were required.
https://github.com/poseidon/typhoon/issues/585 discusses the problem
and newer or upcoming Terraform features that might help.
* Observation: Terraform provisioner support for single files works
well, but iteration isn't viable. We're also constrained to Terraform
language features on the apply side (no extra plugins, no shelling out)
and CoreOS / Fedora tools on the receive side.
* Take a map representation of the contents that would have been splayed
out in asset_dir and pack/encode them into a single file format devised
for easy unpacking. Use an awk one-liner on the receive side to unpack.
In pratice, this has worked well and its rather nice that a single
assets file is transferred by file provisioner (all or none)
Rel: https://github.com/poseidon/terraform-render-bootstrap/pull/162
* Set small CPU requests on static pods kube-apiserver,
kube-controller-manager, and kube-scheduler to align with
upstream tooling and for edge cases
* Effectively, a practical case for these requests hasn't been
observed. However, a small static pod CPU request may offer
a slight benefit if a controller became overloaded and the
below mechanisms were insufficient
Existing safeguards:
* Control plane nodes are tainted to isolate them from
ordinary workloads. Even dense workloads can only compress
CPU resources on worker nodes.
* Control plane static pods use the highest priority class, so
contention favors control plane pods (over say node-exporter)
and CPU is compressible too.
See: https://github.com/poseidon/terraform-render-bootstrap/pull/161
* Update terraform-render-bootstrap module to adopt the
Terrform v0.12 templatefile function feature to replace
the use of terraform-provider-template's `template_dir`
* Require Terraform v0.12.6+ which adds `for_each`
Background:
* `template_dir` was added to `terraform-provider-template`
to add support for template directory rendering in CoreOS
Tectonic Kubernetes distribution (~2017)
* Terraform v0.12 introduced a native `templatefile` function
and v0.12.6 introduced native `for_each` support (July 2019)
that makes it possible to replace `template_dir` usage
* Detect the most recent Fedora CoreOS AMI to allow usage
of Fedora CoreOS in supported regions (previously just
us-east-1)
* Unpin the Fedora CoreOS AMI image which was pinned to
images that had been checked. This does mean if Fedora
publishes a broken image, it will be selected
* Filter out "dev" images which have similar naming
* Review variables available in AWS kubernetes and workers
modules and documentation
* Switching between spot and on-demand has worked since
Terraform v0.12
* Generally, there are too many knobs. Less useful ones
should be de-emphasized or removed
* Remove `cluster_domain_suffix` documentation
* Document worker pools `node_labels` variable to set the
initial node labels for a homogeneous set of workers
* Document `worker_node_labels` convenience variable to
set the initial node labels for default worker nodes
* Fix issue (present since bootkube->bootstrap switch) where
controller asset copy could fail if /etc/kubernetes/manifests
wasn't created in time on platforms using path activation for
the Kubelet (observed on DigitalOcean, also possible on
bare-metal)
* Drop `node-role.kubernetes.io/master` and
`node-role.kubernetes.io/node` node labels
* Kubelet (v1.16) now rejects the node labels used
in the kubectl get nodes ROLES output
* https://github.com/kubernetes/kubernetes/issues/75457
* Rename render module from bootkube to bootstrap. Avoid
confusion with the kubernetes-incubator/bootkube tool since
it is no longer used
* Use the poseidon/terraform-render-bootstrap Terraform module
(formerly poseidon/terraform-render-bootkube)
* https://github.com/poseidon/terraform-render-bootkube/pull/149
* Run a kube-apiserver, kube-scheduler, and kube-controller-manager
static pod on each controller node. Previously, kube-apiserver was
self-hosted as a DaemonSet across controllers and kube-scheduler
and kube-controller-manager were a Deployment (with 2 or
controller_count many replicas).
* Remove bootkube bootstrap and pivot to self-hosted
* Remove pod-checkpointer manifests (no longer needed)
* Run a kube-apiserver, kube-scheduler, and kube-controller-manager
static pod on each controller node. Previously, kube-apiserver was
self-hosted as a DaemonSet across controllers and kube-scheduler
and kube-controller-manager were a Deployment (with 2 or
controller_count many replicas).
* Remove bootkube bootstrap and pivot to self-hosted
* Remove pod-checkpointer manifests (no longer needed)
* Run a kube-apiserver, kube-scheduler, and kube-controller-manager
static pod on each controller node. Previously, kube-apiserver was
self-hosted as a DaemonSet across controllers and kube-scheduler
and kube-controller-manager were a Deployment (with 2 or
controller_count many replicas).
* Remove bootkube bootstrap and pivot to self-hosted
* Remove pod-checkpointer manifests (no longer needed)
* terraform-provider-aws v2.23.0 allows AWS root block devices
to enable encryption by default.
* Require updating terraform-provider-aws to v2.23.0 or higher
* Enable root EBS device encryption by default for controller
instances and worker instances in auto-scaling groups
For comparison:
* Google Cloud persistent disks have been encrypted by
default for years
* Azure managed disk encryption is not ready yet (#486)
* Kubelets can hit the ContainerManager Delegation issue and fail
to start (noted in 72c94f1c6). Its unclear why this occurs only
to some Kubelets (possibly an ordering concern)
* QoS cgroups remain a goal
* When a controller node is affected, bootstrapping fails, which
makes other development harder. Temporarily disable QoS on
controllers only. This should safeguard bring-up and hopefully
still allow the issue to occur on some workers for debugging
* Use the newly minted "Fedora CoreOS Preview" AMI
* Remove iscsi, kubelet.path activation, and kubeconfig
distribution
* As usual, bare-metal efforts make cloud provider ports
much easier
* Allow updating terraform-provider-ct to any release
beyond v0.3.2, but below v1.0. This relaxes the prior
constraint that allowed only v0.3.y provider versions
* Run kube-apiserver as a non-root user (nobody). User
no longer needs to bind low number ports.
* On most platforms, the kube-apiserver load balancer listens
on 6443 and fronts controllers with kube-apiserver pods using
port 6443. Google Cloud TCP proxy load balancers cannot listen
on 6443. However, GCP's load balancer can be made to listen on
443, while kube-apiserver uses 6443 across all platforms.
* For Container Linux or Flatcar Linux alpha/beta/stable,
continue using the `cgroupfs` driver
* For Fedora Atomic, continue using the `systemd` driver
* For Flatcar Linux Edge, use the `systemd` driver
* Replace v0.11 bracket type hints with Terraform v0.12 list expressions
* Use expression syntax instead of interpolated strings, where suggested
* Update AWS tutorial and worker pools documentation
* Define Terraform and plugin version requirements in versions.tf
* Require aws ~> 2.7 to support Terraform v0.12
* Require ct ~> 0.3.2 to support Terraform v0.12
* This change affects users who use worker pools on AWS, GCP, or
Azure with a Container Linux derivative
* Rename worker pool modules' `count` variable to `worker_count`,
because `count` will be a reserved variable name in Terraform v0.12
* Fix to remove a trailing slash that was erroneously introduced
in the scripting that updated from v1.14.1 to v1.14.2
* Workaround before this fix was to re-run `terraform init`
* Change flannel port from the kernel default 8472 to the
IANA assigned VXLAN port 4789
* Update firewall rules or security groups for VXLAN
* Why now? Calico now offers its own VXLAN backend so
standardizing on the IANA port will simplify config
* https://github.com/coreos/flannel/blob/master/Documentation/backends.md#vxlan
* Add an `enable_aggregation` variable to enable the kube-apiserver
aggregation layer for adding extension apiservers to clusters
* Aggregation is **disabled** by default. Typhoon recommends you not
enable aggregation. Consider whether less invasive ways to achieve your
goals are possible and whether those goals are well-founded
* Enabling aggregation and extension apiservers increases the attack
surface of a cluster and makes extensions a part of the control plane.
Admins must scrutinize and trust any extension apiserver used.
* Passing a v1.14 CNCF conformance test requires aggregation be enabled.
Having an option for aggregation keeps compliance, but retains the
stricter security posture on default clusters
* Add ability to load balance TCP applications (e.g. NodePort)
* Output the network load balancer ARN as `nlb_id`
* Accept a `worker_target_groups` (ARN) list to which worker
instances should be added
* AWS NLBs and target groups don't support UDP
* Add calico-ipam CRDs and RBAC permissions
* Switch IPAM from host-local to calico-ipam
* `calico-ipam` subnets `ippools` (defaults to pod CIDR) into
`ipamblocks` (defaults to /26, but set to /24 in Typhoon)
* `host-local` subnets the pod CIDR based on the node PodCIDR
field (set via kube-controller-manager as /24's)
* Create a custom default IPv4 IPPool to ensure the block size
is kept at /24 to allow 110 pods per node (Kubernetes default)
* Retaining host-local was slightly preferred, but Calico v3.6
is migrating all usage to calico-ipam. The codepath that skipped
calico-ipam for KDD was removed
* https://docs.projectcalico.org/v3.6/release-notes/
* Allow terraform-provider-aws >= v1.13, but < 3.0. No change
to the minimum version, but allow using v2.x.y releases
* Verify compatability with terraform-provider-aws v2.1.0
* Resolve in-addr.arpa and ip6.arpa DNS PTR requests for Kubernetes
service IPs and pod IPs
* Previously, CoreDNS was configured to resolve in-addr.arpa PTR
records for service IPs (but not pod IPs)
* Assign pod priorityClassNames to critical cluster and node
components (higher is higher priority) to inform node out-of-resource
eviction order and scheduler preemption and scheduling order
* Priority Admission Controller has been enabled since Typhoon
v1.11.1
* Fix a regression caused by lowering the Kubelet TLS client
certificate to system:nodes group (#100) since dropping
cluster-admin dropped the Kubelet's ability to delete nodes.
* On clouds where workers can scale down (manual terraform apply,
AWS spot termination, Azure low priority deletion), worker shutdown
runs the delete-node.service to remove a node to prevent NotReady
nodes from accumulating
* Allow Kubelets to delete cluster nodes via system:nodes group. Kubelets
acting with system:node and kubelet-delete ClusterRoles is still an
improvement over acting as cluster-admin
* DNS zones served by AWS Route53 may use AWS's special alias records
(other DNS providers would use a CNAME) to resolve the ingress NLB.
Alias records require the NLB DNS name's DNS zone id (not the cluster
`dns_zone_id`)
* System components that require certificates signed by the cluster
CA can submit a CSR to the apiserver, have an administrator inspect
and approve it, and be issued a certificate
* Configure kube-controller-manager to sign Approved CSR's using the
cluster CA private key
* Admins are responsible for approving or denying CSRs, otherwise,
no certificate is issued. Read the Kubernetes docs carefully and
verify the entity making the request and the authorization level
* https://kubernetes.io/docs/tasks/tls/managing-tls-in-a-cluster
* Use a single admin kubeconfig for initial bootkube bootstrap
and for use by a human admin. Previously, an admin kubeconfig
without a named context was used for bootstrap and direct usage
with KUBECONFIG=path, while one with a named context was used
for `kubectl config use-context` style usage. Confusing.
* Provide the admin kubeconfig via `assets/auth/kubeconfig`,
`assets/auth/CLUSTER-config`, or output `kubeconfig-admin`
* terraform-render-bootkube module deprecated kube_dns_service_ip
output in favor of cluster_dns_service_ip
* Rename k8s_dns_service_ip to cluster_dns_service_ip for
consistency too
* Kubelets can use a lower-privilege TLS client certificate with
Org system:nodes and a binding to the system:node ClusterRole
* Admin kubeconfig's continue to belong to Org system:masters to
provide cluster-admin (available in assets/auth/kubeconfig or as
a Terraform output kubeconfig-admin)
* Remove bare-metal output variable kubeconfig
* Add ServiceAccounts and ClusterRoleBindings for kube-apiserver
and kube-scheduler
* Remove the ClusterRoleBinding for the kube-system default ServiceAccount
* Rename the CA certificate CommonName for consistency with upstream
* T3 is the next generation general purpose burstable
instance type. Compared with t2.small, the t3.small is
cheaper, has 2 vCPU (instead of 1) and provides 5 Gbps
of pod-to-pod bandwidth (instead of 1 Gbps)
* Add kube-router for pod networking and NetworkPolicy
as an experiment
* Experiments are not documented or supported in any way,
and may be removed without notice. They have known issues
and aren't enabled without special options.
* Remove bullet about isolating workloads on workers, its
now common practice and new users will assume it
* List advanced features available in each module
* Fix erroneous Kubernetes version listing for Google Cloud
Fedora Atomic
* Calico Felix has been reporting anonymous usage data about the
version and cluster size, which violates Typhoon's privacy policy
where analytics should be opt-in only
* Add a variable enable_reporting (default: false) to allow opting
in to reporting usage data to Calico (or future components)
* loop sends an initial query to detect infinite forwarding
loops in configured upstream DNS servers and fast exit with
an error (its a fatal misconfiguration on the network that
will otherwise cause resolvers to consume memory/CPU until
crashing, masking the problem)
* https://github.com/coredns/coredns/tree/master/plugin/loop
* loadbalance randomizes the ordering of A, AAAA, and MX records
in responses to provide round-robin load balancing (as usual,
clients may still cache responses though)
* https://github.com/coredns/coredns/tree/master/plugin/loadbalance
* Prefer InternalIP and ExternalIP over the node's hostname,
to match upstream behavior and kubeadm
* Previously, hostname-override was used to set node names
to internal IP's to work around some cloud providers not
resolving hostnames for instances (e.g. DO droplets)
* Updating the `terraform-provider-ct` plugin is known to produce
a `user_data` diff in all pre-existing clusters. Applying the
diff to pre-existing cluster destroys controller nodes
* Ignore changes to controller `user_data`. Once all managed
clusters use a release containing this change, it is possible
to update the `terraform-provider-ct` plugin (worker `user_data`
will still be modified)
* Changing the module `ref` for an existing cluster and
re-applying is still NOT supported (although this PR
would protect controllers from being destroyed)
* Run at least two replicas of CoreDNS to better support
rolling updates (previously, kube-dns had a pod nanny)
* On multi-master clusters, set the CoreDNS replica count
to match the number of masters (e.g. a 3-master cluster
previously used replicas:1, now replicas:3)
* Add AntiAffinity preferred rule to favor distributing
CoreDNS pods across controller nodes nodes
* Continue to ensure scheduler and controller-manager run
at least two replicas to support performing kubectl edits
on single-master clusters (no change)
* For multi-master clusters, set scheduler / controller-manager
replica count to the number of masters (e.g. a 3-master cluster
previously used replicas:2, now replicas:3)
* Add new bird and felix readiness checks
* Read MTU from ConfigMap veth_mtu
* Add RBAC read for serviceaccounts
* Remove invalid description from CRDs
* Release v1.11.1 erroneously left Fedora Atomic clusters using
the v1.11.0 Kubelet. The rest of the control plane ran v1.11.1
as expected
* Update Kubelet from v1.11.0 to v1.11.1 so Fedora Atomic matches
Container Linux
* Container Linux modules were not affected
* Basic monitoring (free) is sufficient for casual console browsing
* Detailed monitoring (paid) is not leveraged for CloudWatch anyway
* Favor Prometheus for cloud-agnostic metrics, aggregation, and alerting
* Simplify clusters to come with a single NLB
* Listen for apiserver traffic on port 6443 and forward
to controllers (with healthy apiserver)
* Listen for ingress traffic on ports 80/443 and forward
to workers (with healthy ingress controller)
* Reduce cost of default clusters by 1 NLB ($18.14/month)
* Keep using CNAME records to the `ingress_dns_name` NLB and
the nginx-ingress addon for Ingress (up to a few million RPS)
* Users with heavy traffic (many million RPS) can create their
own separate NLB(s) for Ingress and use the new output worker
target groups
* Fix issue where additional worker pools come with an
extraneous network load balancer
* Adjust firewall rules, security groups, cloud load balancers,
and generated kubeconfig's
* Facilitates some future simplifications and cost reductions
* Bare-Metal users who exposed kube-apiserver on a WAN via their
router or load balancer will need to adjust its configuration.
This is uncommon, most apiserver are on LAN and/or behind VPN
so no routing infrastructure is configured with the port number
* Use Kubelet bearer token authn/authz to scrape metrics
* Drop RBAC permission from nodes/proxy to nodes/metrics
* Stop proxying kubelet scrapes through the apiserver, since
this required higher privilege (nodes/proxy) and can add
load to the apiserver on large clusters
* Replace os_channel variable with os_image to align naming
across clouds. Users who set this option to stable, beta, or
alpha should now set os_image to coreos-stable, coreos-beta,
or coreos-alpha.
* Default os_image to coreos-stable. This continues to use
the most recent image from the stable channel as always.
* Allow Container Linux derivative Flatcar Linux by setting
os_image to `flatcar-stable`, `flatcar-beta`, `flatcar-alpha`
* Raise minimum Terraform version to v0.11.0
* Terraform v0.11.x has been supported since Typhoon v1.9.2
and Terraform v0.10.x was last released in Nov 2017. I'd like
to stop worrying about v0.10.x and remove migration docs as
a later followup
* Migration docs docs/topics/maintenance.md#terraform-v011x
* Add `worker_price` to allow worker spot instances. Defaults
to empty string for the worker autoscaling group to use regular
on-demand instances.
* Add `spot_price` to internal `workers` module for spot worker
pools
* Note: Unlike GCP `preemptible` workers, spot instances require
you to pick a bid price.
* Observed frequent kube-scheduler and controller-manager
restarts with Calico as the CNI provider. Root cause was
unclear since control plane was functional and tests of
pod to pod network connectivity passed
* Root cause: Calico sets up cali* and tunl* network interfaces
for containers on hosts. NetworkManager tries to manage these
interfaces. It periodically disconnected veth pairs. Logs did
not surface this issue since its not an error per-se, just Calico
and NetworkManager dueling for control. Kubernetes correctly
restarted pods failing health checks and ensured 2 replicas were
running so the control plane functioned mostly normally. Pod to
pod connecitivity was only affected occassionally. Pain to debug.
* Solution: Configure NetworkManager to ignore the Calico ifaces
per Calico's recommendation. Cloud-init writes files after
NetworkManager starts, so a restart is required on first boot. On
subsequent boots, the file is present so no restart is needed
* (containerized) kube-proxy warns that it is unable to
load the ip_vs kernel module despite having the correct
mounts. Atomic uses an xz compressed module and modprobe
in the container was not compiled with compression support
* Workaround issue for now by always loading ip_vs on-host
* https://github.com/kubernetes/kubernetes/issues/60
* http://www.projectatomic.io/blog/2018/04/fedora-atomic-20-apr-18/
* Atomic publishes nightly AMIs which sometimes don't boot
or have issues. Until there is a source of reliable AMIs,
pin the best known working AMI
* Rel 66a66f0d18544591ffdbf8fae9df790113c93d72
* Use the upstream bootkube image packaged with the
required metadata to be usable as a system container
under systemd
* Run bootkube with runc so no host level components
use Docker any more. Docker is still the runtime
* Remove bootkube script and old systemd unit
* Change kubelet system image to use --cgroups-per-qos=true
(default) instead of false
* Change kubelet system image to use --enforce-node-allocatable=pods
instead of an empty string
* Fix kubelet port-forward on Google Cloud / Fedora Atomic
* Mount the host's /etc/hosts in kubelet system containers
* Problem: kubelet runc system containers on Atomic were not
mounting the host's /etc/hosts, like rkt-fly does on Container
Linux. `kubectl port-forward` calls socat with localhost. DNS
servers on AWS, DO, and in many bare-metal environments resolve
localhost to the caller as a convenience. Google Cloud notably
does not nor is it required to do so and this surfaced the
missing /etc/hosts in runc kubelet namespaces.
* Enable etcd v3.3 metrics to expose metrics for
scraping by Prometheus
* Use k8s.gcr.io instead of gcr.io/google_containers
* Add flexvolume plugin mount to controller manager
* Update kube-dns from v1.14.8 to v1.14.9
* Mount /opt/cni/bin in kubelet system container so
CNI plugin binaries can be found. Before, flannel
worked because the kubelet falls back to flannel
plugin baked into the hyperkube (undesired)
* Move the CNI bin install location later, since /opt
changes may be lost between ostree rebases
* Use the upstream hyperkube image packaged with the
required metadata to be usable as a system container
under systemd
* Fix port-forward since socat is included
* Update manifests for Kubernetes v1.10.0
* Update etcd from v3.3.2 to v3.3.3
* Add disk_type optional variable on AWS
* Remove redundant kubeconfig copy on AWS
* Distribute etcd secres only to controllers
* Organize module variables and ssh steps
* Expose etcd metrics to workers so Prometheus can
run on a worker, rather than a controller
* Drop temporary firewall rules allowing Prometheus
to run on a controller and scrape targes
* Related to https://github.com/poseidon/typhoon/pull/175
* Use etcd v3.3 --listen-metrics-urls to expose only metrics
data via http://0.0.0.0:2381 on controllers
* Add Prometheus discovery for etcd peers on controller nodes
* Temporarily drop two noisy Prometheus alerts
* Change EBS volume type from `standard` ("prior generation)
to `gp2`. Prometheus alerts are tuned for SSDs
* Other platforms have fast enough disks by default
* AWS and Google Cloud make use of auto-scaling groups
and managed instance groups, respectively. As such, the
kubeconfig is already held in cloud user-data
* Controller instances are provisioned with a kubeconfig
from user-data. Its redundant to use a Terraform remote
file copy step for the kubeconfig.
* Introduce the ability to support Container Linux Config
"snippets" for controllers and workers on cloud platforms.
This allows end-users to customize hosts by providing Container
Linux configs that are additively merged into the base configs
defined by Typhoon. Config snippets are validated, merged, and
show any errors during `terraform plan`
* Example uses include adding systemd units, network configs,
mounts, files, raid arrays, or other disk provisioning features
provided by Container Linux Configs (using Ignition low-level)
* Requires terraform-provider-ct v0.2.1 plugin
* Add a node-role.kubernetes.io/controller="true" node label
to controllers so Prometheus service discovery can filter to
services that only run on controllers (i.e. masters)
* Leave node-role.kubernetes.io/master="" untouched as its
a Kubernetes convention
* This reverts commit cce4537487.
* Provider passing to child modules is complex and the behavior
changed between Terraform v0.10 and v0.11. We're continuing to
allow both versions so this change should be reverted. For the
time being, those using our internal Terraform modules will have
to be aware of the minimum version for AWS and GCP providers,
there is no good way to do enforcement.
* Allow groups of workers to be defined and joined to
a cluster (i.e. worker pools)
* Move worker resources into a Terraform submodule
* Output variables needed for passing to worker pools
* Add usage docs for AWS worker pools (advanced)
* Template terraform-render-bootkube's multi-line kubeconfig
output using the right indentation
* Add `kubeconfig` variable to google-cloud controllers and
workers Terraform submodules
* Remove `kubeconfig_*` variables from google-cloud controllers
and workers Terraform submodules
* Set Kubelet search path for flexvolume plugins
to /var/lib/kubelet/volumeplugins
* Add support for flexvolume plugins on AWS, GCE, and DO
* See 9548572d98 which added flexvolume support for bare-metal
Dalton Hubble
Suraj Deshmukh
Valer Cara
Jordan Pittier
Tamer Fahmy
Robert Fairburn
Ben Drucker
William Zhang
Michael Holt