* Fix a regression caused by lowering the Kubelet TLS client
certificate to system:nodes group (#100) since dropping
cluster-admin dropped the Kubelet's ability to delete nodes.
* On clouds where workers can scale down (manual terraform apply,
AWS spot termination, Azure low priority deletion), worker shutdown
runs the delete-node.service to remove a node to prevent NotReady
nodes from accumulating
* Allow Kubelets to delete cluster nodes via system:nodes group. Kubelets
acting with system:node and kubelet-delete ClusterRoles is still an
improvement over acting as cluster-admin
* System components that require certificates signed by the cluster
CA can submit a CSR to the apiserver, have an administrator inspect
and approve it, and be issued a certificate
* Configure kube-controller-manager to sign Approved CSR's using the
cluster CA private key
* Admins are responsible for approving or denying CSRs, otherwise,
no certificate is issued. Read the Kubernetes docs carefully and
verify the entity making the request and the authorization level
* https://kubernetes.io/docs/tasks/tls/managing-tls-in-a-cluster
* Use a single admin kubeconfig for initial bootkube bootstrap
and for use by a human admin. Previously, an admin kubeconfig
without a named context was used for bootstrap and direct usage
with KUBECONFIG=path, while one with a named context was used
for `kubectl config use-context` style usage. Confusing.
* Provide the admin kubeconfig via `assets/auth/kubeconfig`,
`assets/auth/CLUSTER-config`, or output `kubeconfig-admin`
* terraform-render-bootkube module deprecated kube_dns_service_ip
output in favor of cluster_dns_service_ip
* Rename k8s_dns_service_ip to cluster_dns_service_ip for
consistency too
* Kubelets can use a lower-privilege TLS client certificate with
Org system:nodes and a binding to the system:node ClusterRole
* Admin kubeconfig's continue to belong to Org system:masters to
provide cluster-admin (available in assets/auth/kubeconfig or as
a Terraform output kubeconfig-admin)
* Remove bare-metal output variable kubeconfig
* Add ServiceAccounts and ClusterRoleBindings for kube-apiserver
and kube-scheduler
* Remove the ClusterRoleBinding for the kube-system default ServiceAccount
* Rename the CA certificate CommonName for consistency with upstream
* On GCP, kubectl port-forward connections to pods are closed
after a timeout (unlike AWS NLB's or Azure load balancers)
* Increase the GCP apiserver backend service timeout from 1 minute
to 5 minutes to be more similar to AWS/Azure LB behavior
* Add kube-router for pod networking and NetworkPolicy
as an experiment
* Experiments are not documented or supported in any way,
and may be removed without notice. They have known issues
and aren't enabled without special options.
* Remove bullet about isolating workloads on workers, its
now common practice and new users will assume it
* List advanced features available in each module
* Fix erroneous Kubernetes version listing for Google Cloud
Fedora Atomic
* Calico Felix has been reporting anonymous usage data about the
version and cluster size, which violates Typhoon's privacy policy
where analytics should be opt-in only
* Add a variable enable_reporting (default: false) to allow opting
in to reporting usage data to Calico (or future components)
* loop sends an initial query to detect infinite forwarding
loops in configured upstream DNS servers and fast exit with
an error (its a fatal misconfiguration on the network that
will otherwise cause resolvers to consume memory/CPU until
crashing, masking the problem)
* https://github.com/coredns/coredns/tree/master/plugin/loop
* loadbalance randomizes the ordering of A, AAAA, and MX records
in responses to provide round-robin load balancing (as usual,
clients may still cache responses though)
* https://github.com/coredns/coredns/tree/master/plugin/loadbalance
* Prefer InternalIP and ExternalIP over the node's hostname,
to match upstream behavior and kubeadm
* Previously, hostname-override was used to set node names
to internal IP's to work around some cloud providers not
resolving hostnames for instances (e.g. DO droplets)
* Updating the `terraform-provider-ct` plugin is known to produce
a `user_data` diff in all pre-existing clusters. Applying the
diff to pre-existing cluster destroys controller nodes
* Ignore changes to controller `user_data`. Once all managed
clusters use a release containing this change, it is possible
to update the `terraform-provider-ct` plugin (worker `user_data`
will still be modified)
* Changing the module `ref` for an existing cluster and
re-applying is still NOT supported (although this PR
would protect controllers from being destroyed)
* Allowing serving IPv6 applications via Kubernetes Ingress
on Typhoon Google Cloud clusters
* Add `ingress_static_ipv6` output variable for use in AAAA
DNS records
* Run at least two replicas of CoreDNS to better support
rolling updates (previously, kube-dns had a pod nanny)
* On multi-master clusters, set the CoreDNS replica count
to match the number of masters (e.g. a 3-master cluster
previously used replicas:1, now replicas:3)
* Add AntiAffinity preferred rule to favor distributing
CoreDNS pods across controller nodes nodes
* Continue to ensure scheduler and controller-manager run
at least two replicas to support performing kubectl edits
on single-master clusters (no change)
* For multi-master clusters, set scheduler / controller-manager
replica count to the number of masters (e.g. a 3-master cluster
previously used replicas:2, now replicas:3)
* Add new bird and felix readiness checks
* Read MTU from ConfigMap veth_mtu
* Add RBAC read for serviceaccounts
* Remove invalid description from CRDs
* Broaden internal-etcd firewall rule to allow etcd client
traffic (2379) from other controller nodes
* Previously, kube-apiservers were only able to connect to their
node's local etcd peer. While master node outages were tolerated,
reaching a healthy peer took longer than neccessary in some cases
* Reduce time needed to bootstrap a cluster
* Switch Ingress from regional network load balancers to global
HTTP/TCP Proxy load balancing
* Reduce cost by ~$19/month per cluster. Google bills the first 5
global and regional forwarding rules separately. Typhoon clusters now
use 3 global and 0 regional forwarding rules.
* Worker pools no longer include an extraneous load balancer. Remove
worker module's `ingress_static_ip` output.
* Add `ingress_static_ipv4` output variable
* Add `worker_instance_group` output to allow custom global load
balancing
* Deprecate `controllers_ipv4_public` module output
* Deprecate `ingress_static_ip` module output. Use `ingress_static_ipv4`
* Adjust firewall rules, security groups, cloud load balancers,
and generated kubeconfig's
* Facilitates some future simplifications and cost reductions
* Bare-Metal users who exposed kube-apiserver on a WAN via their
router or load balancer will need to adjust its configuration.
This is uncommon, most apiserver are on LAN and/or behind VPN
so no routing infrastructure is configured with the port number
* Use Kubelet bearer token authn/authz to scrape metrics
* Drop RBAC permission from nodes/proxy to nodes/metrics
* Stop proxying kubelet scrapes through the apiserver, since
this required higher privilege (nodes/proxy) and can add
load to the apiserver on large clusters
* Raise minimum Terraform version to v0.11.0
* Terraform v0.11.x has been supported since Typhoon v1.9.2
and Terraform v0.10.x was last released in Nov 2017. I'd like
to stop worrying about v0.10.x and remove migration docs as
a later followup
* Migration docs docs/topics/maintenance.md#terraform-v011x
* Allow multi-controller clusters on Google Cloud
* GCP regional network load balancers have a long open
bug in which requests originating from a backend instance
are routed to the instance itself, regardless of whether
the health check passes or not. As a result, only the 0th
controller node registers. We've recommended just using
single master GCP clusters for a while
* https://issuetracker.google.com/issues/67366622
* Workaround issue by switching to a GCP TCP Proxy load
balancer. TCP proxy lb routes traffic to a backend service
(global) of instance group backends. In our case, spread
controllers across 3 zones (all regions have 3+ zones) and
organize them in 3 zonal unmanaged instance groups that
serve as backends. Allows multi-controller cluster creation
* GCP network load balancers only allowed legacy HTTP health
checks so kubelet 10255 was checked as an approximation of
controller health. Replace with TCP apiserver health checks
to detect unhealth or unresponsive apiservers.
* Drawbacks: GCP provision time increases, tailed logs now
timeout (similar tradeoff in AWS), controllers only span 3
zones instead of the exact number in the region
* Workaround in Typhoon has been known and posted for 5 months,
but there still appears to be no better alternative. Its
probably time to support multi-master and accept the downsides
* Expose etcd metrics to workers so Prometheus can
run on a worker, rather than a controller
* Drop temporary firewall rules allowing Prometheus
to run on a controller and scrape targes
* Related to https://github.com/poseidon/typhoon/pull/175
* Use etcd v3.3 --listen-metrics-urls to expose only metrics
data via http://0.0.0.0:2381 on controllers
* Add Prometheus discovery for etcd peers on controller nodes
* Temporarily drop two noisy Prometheus alerts
* AWS and Google Cloud make use of auto-scaling groups
and managed instance groups, respectively. As such, the
kubeconfig is already held in cloud user-data
* Controller instances are provisioned with a kubeconfig
from user-data. Its redundant to use a Terraform remote
file copy step for the kubeconfig.
* Introduce the ability to support Container Linux Config
"snippets" for controllers and workers on cloud platforms.
This allows end-users to customize hosts by providing Container
Linux configs that are additively merged into the base configs
defined by Typhoon. Config snippets are validated, merged, and
show any errors during `terraform plan`
* Example uses include adding systemd units, network configs,
mounts, files, raid arrays, or other disk provisioning features
provided by Container Linux Configs (using Ignition low-level)
* Requires terraform-provider-ct v0.2.1 plugin
* Add a node-role.kubernetes.io/controller="true" node label
to controllers so Prometheus service discovery can filter to
services that only run on controllers (i.e. masters)
* Leave node-role.kubernetes.io/master="" untouched as its
a Kubernetes convention
* Fix issue where worker firewall rules didn't apply to
additional workers attached to a GCP cluster using the new
"worker pools" feature (unreleased, #148). Solves host
connection timeouts and pods not being scheduled to attached
worker pools.
* Add `name` field to GCP internal worker module to represent
the unique name of of the worker pool
* Use `cluster_name` field of GCP internal worker module for
passing the name of the cluster to which workers should be
attached
* This reverts commit cce4537487.
* Provider passing to child modules is complex and the behavior
changed between Terraform v0.10 and v0.11. We're continuing to
allow both versions so this change should be reverted. For the
time being, those using our internal Terraform modules will have
to be aware of the minimum version for AWS and GCP providers,
there is no good way to do enforcement.
* Set defaults for internal worker module's count,
machine_type, and os_image
* Allow "pools" of homogeneous workers to be created
using the google-cloud/kubernetes/workers module
* Template terraform-render-bootkube's multi-line kubeconfig
output using the right indentation
* Add `kubeconfig` variable to google-cloud controllers and
workers Terraform submodules
* Remove `kubeconfig_*` variables from google-cloud controllers
and workers Terraform submodules
* Set Kubelet search path for flexvolume plugins
to /var/lib/kubelet/volumeplugins
* Add support for flexvolume plugins on AWS, GCE, and DO
* See 9548572d98 which added flexvolume support for bare-metal
* Remove PersistentVolumeLabel admission controller flag
* Switch Deployments and DaemonSets to apps/v1
* Minor update to pod-checkpointer image version
* Add flannel service account and limited RBAC cluster role
* Change DaemonSets to tolerate NoSchedule and NoExecute taints
* Remove deprecated apiserver --etcd-quorum-read flag
* Update Calico from v3.0.1 to v3.0.2
* Add Calico GlobalNetworkSet CRD
* https://github.com/poseidon/terraform-render-bootkube/pull/44
* Allow kube-dns to respond to DNS queries with a custom
suffix, instead of the default 'cluster.local'
* Useful when multiple clusters exist on the same local
network and wish to query services on one another
* When restarting masters, `etcd-member.service` may fail to lookup peers if
/etc/resolv.conf hasn't been populated yet. Require the wait-for-dns.service.
* Update hyperkube from v1.8.3 to v1.8.4
* Remove flock from bootstrap-apiserver and kube-apiserver
* Remove unused critical-pod annotations in manifests
* Use service accounts for kube-proxy and pod-checkpointer
* Update Calico from v2.6.1 to v2.6.3
* Update flannel from v0.9.0 to v0.9.1
* Remove Calico termination grace period to prevent calico
from getting stuck for extended periods
* https://github.com/poseidon/terraform-render-bootkube/pull/29
* With google provider 1.2, target pool instances can use self_link
and zone/name formats without causing a diff on each plan
* Original workaround: 77fc14db71
* Require the controller module to be completed before starting
to remote exec bootkube start, otherwise its possible the controller
nodes were created, but not the network load balancer
* Change controllers ASG to heterogeneous EC2 instances
* Create DNS records for each controller's private IP for etcd
* Change etcd to run on-host, across controllers (etcd-member.service)
* Reduce time to bootstrap a cluster
* Deprecate self-hosted-etcd on the AWS platform
Dalton Hubble
Ben Drucker
William Zhang
Barak Michener
Lars Fenneberg
Vincent Palmer