eole-one-master/tmpl/OpenNebulaNetwork.conf

87 lines
3.5 KiB
Plaintext

# -------------------------------------------------------------------------- #
# Copyright 2002-2017, OpenNebula Project, OpenNebula Systems #
# #
# Licensed under the Apache License, Version 2.0 (the "License"); you may #
# not use this file except in compliance with the License. You may obtain #
# a copy of the License at #
# #
# http://www.apache.org/licenses/LICENSE-2.0 #
# #
# Unless required by applicable law or agreed to in writing, software #
# distributed under the License is distributed on an "AS IS" BASIS, #
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
# See the License for the specific language governing permissions and #
# limitations under the License. #
#--------------------------------------------------------------------------- #
################################################################################
# Overriding Options in Network Template
################################################################################
#
# Option can be overridden or added per network using this format
# in the network template:
#
# CONF="vxlan_mc=239.0.100.0,test=false,validate_vlan_id=true"
# BRIDGE_CONF="sethello=6"
# IP_LINK_CONF="tos=10,udpcsum=,udp6zerocsumrx=__delete__"
#
# Options can have empty value when they don't need a parameter. Also the
# special value "__delete__" can be used to delete parameters set here.
# Set to true to check that no other vlans are connected to the bridge.
# Works with 802.1Q and VXLAN.
:validate_vlan_id: false
################################################################################
# Open vSwitch Options
################################################################################
# Enable ARP Cache Poisoning Prevention Rules
%if %%getVar('arp_cache_poisoning','non') == 'oui'
:arp_cache_poisoning: true
%else
:arp_cache_poisoning: false
%end if
################################################################################
# 802.1Q Options
################################################################################
# Default MTU for the 802.1Q interface
:vlan_mtu: 1500
################################################################################
# VXLAN Options
################################################################################
# Base multicast address for each VLAN. The mc address is :vxlan_mc + :vlan_id
:vxlan_mc: 239.0.0.0
# Time To Live (TTL) should be > 1 in routed multicast networks (IGMP)
:vxlan_ttl: 16
# Default MTU for the VXLAN interface
:vxlan_mtu: 1500
################################################################################
# Bridge and Interface Creation Options
################################################################################
# These options will execute brctl commands with these values. For example,
# this option will execute:
#
# brctl stp <bridge name> on
#
# :bridge_conf:
# :stp: on
# These options will be added to the ip link add command. For example:
#
# sudo ip link add lxcbr0.260 type vxlan id 260 group 239.0.101.4 \
# ttl 16 dev lxcbr0 udp6zerocsumrx tos 3
#
# :ip_link_conf:
# :udp6zerocsumrx:
# :tos: 3